Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

TLV1117LV25DCYR IC REG LINEAR 2.5V 1A SOT223-4 Texas Instruments	3,384 In Stock	1 : ¥2.96000 Cut Tape (CT) 2,500 : ¥0.84526 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	2.5V	-	1.3V @ 800mA	1A	100 µA	-	75dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-4
LMS1585ACSX-ADJ/NOPB IC REG LIN POS ADJ 5A DDPAK Texas Instruments	773 In Stock	1 : ¥23.81000 Cut Tape (CT) 500 : ¥14.93474 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	13V	1.25V	11.6V	1.4V @ 5A	5A	7 mA	13 mA	72dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-263-4, D2PAK (3 Leads + Tab), TO-263AA	TO-263 (DDPAK-3)
MC79L05ACDG4 IC REG LINEAR -5V 100MA 8SOIC Texas Instruments	0 In Stock	1,500 : ¥4.06723 Tube	-	Tube	Obsolete	Negative	Fixed	1	-20V	-5V	-	1.7V @ 40mA	100mA	-	-	49dB (120Hz)	-	Over Temperature, Short Circuit	0°C ~ 125°C	Surface Mount	8-SOIC (0.154", 3.90mm Width)	8-SOIC

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.