Thyristors

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Voltage - Breakover	Voltage - Off State	Voltage - On State	Current - Peak Pulse (8/20µs)	Current - Peak Pulse (10/1000µs)	Current - Hold (Ih)	Number of Elements	Capacitance	Mounting Type	Package / Case	Supplier Device Package

P3100SBLRP THYRISTOR 275V 250A DO214AA Littelfuse Inc.	9,337 In Stock	1 : ¥10.59000 Cut Tape (CT) 2,500 : ¥4.39249 Tape & Reel (TR)	SIDACtor®	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	350V	275V	4 V	250 A	80 A	150 mA	1	45pF	Surface Mount	DO-214AA, SMB	DO-214AA
SMCP3100SC THYRISTOR 275V 400A DO214AA Eaton - Electronics Division	6,031 In Stock	1 : ¥5.66000 Cut Tape (CT) 3,000 : ¥1.89422 Tape & Reel (TR)	SMCP	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	350V	275V	4 V	400 A	100 A	120 mA	1	35pF	Surface Mount	DO-214AA, SMB	SMB
B61089BDR SIDACTOR SLIC DUAL PORT SMD Littelfuse Inc.	1,290 In Stock	1 : ¥8.29000 Cut Tape (CT) 2,500 : ¥3.42894 Tape & Reel (TR)	SIDACtor®	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	115V	170V	-	170 A	35 A	150 mA	2	100pF	Surface Mount	8-SOIC (0.154", 3.90mm Width)	8-SOIC

Showing

of 3

Thyristors

Thyristor-based Transient Voltage Suppression (TVS) devices are over-voltage protection devices that approximate an open circuit under normal operating conditions. Application of a voltage across them in excess of some specific value called the breakover voltage causes them to enter a conductive state approximating a short circuit. This state persists until current flow through the device is reduced below a minimum value called "hold current" by some outside influence within the circuit.