Buffers, Drivers, Receivers, Transceivers

Results: 5

Filters

Stacked

Scrolling

Showing

of 5

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Logic Type	Number of Elements	Number of Bits per Element	Input Type	Output Type	Current - Output High, Low	Voltage - Supply	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

SN74LVC1G07DCKR IC BUF NON-INVERT 5.5V SC70-5 Texas Instruments	99,014 In Stock	1 : ¥2.55000 Cut Tape (CT) 3,000 : ¥0.44533 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	-	Open Drain	-, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	-	-	Surface Mount	5-TSSOP, SC-70-5, SOT-353	SC-70-5
SN74LVC1G17DBVR IC BUF NON-INVERT 5.5V SOT23-5 Texas Instruments	56,135 In Stock	1 : ¥2.96000 Cut Tape (CT) 3,000 : ¥0.51492 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	Schmitt Trigger	Push-Pull	32mA, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	-	-	Surface Mount	SC-74A, SOT-753	SOT-23-5
SN74LVC2G17DBVR IC BUF NON-INVERT 5.5V SOT23-6 Texas Instruments	119,027 In Stock	1 : ¥3.28000 Cut Tape (CT) 3,000 : ¥0.60581 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	2	1	Schmitt Trigger	Push-Pull	32mA, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	-	-	Surface Mount	SOT-23-6	SOT-23-6
SN74LVC2G17DCKR IC BUF NON-INVERT 5.5V SC70-6 Texas Instruments	73,210 In Stock	1 : ¥3.61000 Cut Tape (CT) 3,000 : ¥0.80599 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	2	1	Schmitt Trigger	Push-Pull	32mA, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	-	-	Surface Mount	6-TSSOP, SC-88, SOT-363	SC-70-6
NLV37WZ17USG IC BUFFER NON-INVERT 5.5V US8 onsemi	0 In Stock	1 : ¥3.53000 Cut Tape (CT) 3,000 : ¥0.93568 Tape & Reel (TR)	37WZ	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Obsolete	Buffer, Non-Inverting	3	1	Schmitt Trigger	Push-Pull	32mA, 32mA	2.3V ~ 5.5V	-55°C ~ 125°C (TA)	Automotive	AEC-Q100	Surface Mount	8-VFSOP (0.091", 2.30mm Width)	US8

Showing

of 5

Buffers, Drivers, Receivers, Transceivers

Logic buffers, drivers, receivers and transceivers allow isolated access to logic signals from one circuit for use in another circuit. Buffers pass their input signal, either unchanged or inverted, to their output and may be used to clean up a weak signal or drive a load. In a boolean logic simulator, a buffer is mainly used to increase propagation delay. Logic receivers and transceivers allow isolated communication between data buses.