Buffers, Drivers, Receivers, Transceivers

Results: 5

Filters

Stacked

Scrolling

Showing

of 5

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Logic Type	Number of Elements	Number of Bits per Element	Input Type	Output Type	Current - Output High, Low	Voltage - Supply	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

SN74LVC2G07DBVR IC BUF NON-INVERT 5.5V SOT23-6 Texas Instruments	41,853 In Stock	1 : ¥3.61000 Cut Tape (CT) 3,000 : ¥0.80599 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	2	1	-	Open Drain	-, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	-	-	Surface Mount	SOT-23-6	SOT-23-6
SN74AUP2G126DCUR IC BUFFER NON-INVERT 3.6V 8VSSOP Texas Instruments	10,371 In Stock	1 : ¥3.94000 Cut Tape (CT) 3,000 : ¥1.38807 Tape & Reel (TR)	74AUP	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	2	1	-	3-State	4mA, 4mA	0.8V ~ 3.6V	-40°C ~ 85°C (TA)	-	-	Surface Mount	8-VFSOP (0.091", 2.30mm Width)	8-VSSOP
SN74HCS240QPWRQ1 IC BUFFER INVERT 6V 20TSSOP Texas Instruments	1,233 In Stock	1 : ¥5.75000 Cut Tape (CT) 2,000 : ¥2.23633 Tape & Reel (TR)	74HCS	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Inverting	2	4	Schmitt Trigger	3-State	7.8mA, 7.8mA	2V ~ 6V	-40°C ~ 125°C (TA)	-	-	Surface Mount	20-TSSOP (0.173", 4.40mm Width)	20-TSSOP
SN74AXCH4T245PWR IC TRANSLATION TXRX 3.6V 16TSSOP Texas Instruments	7,725 In Stock	1 : ¥7.55000 Cut Tape (CT) 2,000 : ¥3.19241 Tape & Reel (TR)	74AXCH	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Translation Transceiver	2	2	-	3-State	12mA, 12mA	0.65V ~ 3.6V	-40°C ~ 125°C (TA)	-	-	Surface Mount	16-TSSOP (0.173", 4.40mm Width)	16-TSSOP
NLVVHC1GT125DF2G IC BUFFER NON-INVERT 5.5V SC88A onsemi	0 In Stock	1 : ¥2.87000 Cut Tape (CT) 30,000 : ¥0.34893 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Obsolete	Buffer, Non-Inverting	1	1	-	3-State	8mA, 8mA	3V ~ 5.5V	-55°C ~ 125°C (TA)	Automotive	AEC-Q100	Surface Mount	5-TSSOP, SC-70-5, SOT-353	SC-88A (SC-70-5/SOT-353)

Showing

of 5

Buffers, Drivers, Receivers, Transceivers

Logic buffers, drivers, receivers and transceivers allow isolated access to logic signals from one circuit for use in another circuit. Buffers pass their input signal, either unchanged or inverted, to their output and may be used to clean up a weak signal or drive a load. In a boolean logic simulator, a buffer is mainly used to increase propagation delay. Logic receivers and transceivers allow isolated communication between data buses.