Buffers, Drivers, Receivers, Transceivers

Results: 5

Filters

Stacked

Scrolling

Showing

of 5

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Logic Type	Number of Elements	Number of Bits per Element	Input Type	Output Type	Current - Output High, Low	Voltage - Supply	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

SN74LVC1G17DBVT IC BUF NON-INVERT 5.5V SOT23-5 Texas Instruments	13,205 In Stock	1 : ¥7.39000 Cut Tape (CT) 250 : ¥4.81360 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	Schmitt Trigger	Push-Pull	32mA, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	Surface Mount	SC-74A, SOT-753	SOT-23-5
SN74LVC1G07MDCKREP IC BUF NON-INVERT 5.5V SC70-5 Texas Instruments	8,952 In Stock	1 : ¥14.86000 Cut Tape (CT) 3,000 : ¥6.80604 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	-	Open Drain	-, 32mA	1.65V ~ 5.5V	-55°C ~ 125°C (TA)	Surface Mount	5-TSSOP, SC-70-5, SOT-353	SC-70-5
SN74LVC8T245MPWREP IC TRANSLATION TXRX 5.5V 24TSSOP Texas Instruments	5,790 In Stock	1 : ¥64.53000 Cut Tape (CT) 2,000 : ¥35.24918 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Translation Transceiver	1	8	-	3-State	32mA, 32mA	1.65V ~ 5.5V	-55°C ~ 125°C (TA)	Surface Mount	24-TSSOP (0.173", 4.40mm Width)	24-TSSOP
CLVC16T245MDGGEP IC TRANSLATOR BIDIR 48TSSOP Texas Instruments	639 In Stock	1 : ¥144.82000 Tube	74LVC	Tube	Active	Translation Transceiver	2	8	-	3-State	32mA, 32mA	1.65V ~ 5.5V	-40°C ~ 85°C (TA)	Surface Mount	48-TFSOP (0.240", 6.10mm Width)	48-TSSOP
MC74HC125ADG IC BUFFER NON-INVERT 6V 14SOIC onsemi	878 In Stock	1 : ¥4.93000 Tube	74HC	Tube	Active	Buffer, Non-Inverting	4	1	-	3-State	7.8mA, 7.8mA	2V ~ 6V	-55°C ~ 125°C (TA)	Surface Mount	14-SOIC (0.154", 3.90mm Width)	14-SOIC

Showing

of 5

Buffers, Drivers, Receivers, Transceivers

Logic buffers, drivers, receivers and transceivers allow isolated access to logic signals from one circuit for use in another circuit. Buffers pass their input signal, either unchanged or inverted, to their output and may be used to clean up a weak signal or drive a load. In a boolean logic simulator, a buffer is mainly used to increase propagation delay. Logic receivers and transceivers allow isolated communication between data buses.