SKY67183-396LF Datasheet by Skyworks Solutions Inc.

O® X SKYWORKS“ RFIN I RFOUT Wfi VDD VBIAS Active EN Bias WWI MIC 33 [J 777777 y :1 WC . ‘ , . ‘ r, RFIN 72) : 1 A], RFOUT . ‘ 7 | ‘ k, VBIAS 732/ : i if, VDD . < i="" ‘="" f,="" rset="" 744‘,="" §="" j="" (3,="" en="" zoom-002="">
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 1
DATA SHEET
SKY67183-396LF: 400 to 6000 MHz
Broadband Low-Noise Amplifier
Applications
• FDD and TDD 4G LTE and 5G NR systems
• Active antenna array and massive MIMO
• Receive LNA for micro-cell, macro-cell, and small cell
base stations
• Land mobile radios and military communications
• Low-noise broadband gain block and driver amplifier
Features
• Low-noise amplifier:
− Very low noise figure
− Temperature and process-stable active bias up to +115 °C
− Wide operating voltage range
− Low gain slope over operating band
− Excellent input return loss
• Integrated controller:
− Stable amplifier bias
− Temperature compensation
− True logic level thresholds
− Fast response time
• Excellent broadband flat gain performance
• Minimal BOM count
• Low current IDD 56 mA @ 5 V
• Fast rise/fall time ENABLE function suitable for TDD application
• Miniature DFN (8-pin, 2 x 2 mm) package
(MSL1 @ 260 °C per JEDEC J-STD-020)
Skyworks Green
TM
products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green
TM
, document number
SQ04–0074.
Figure 1. SKY67183-396LF Block Diagram
Description
The SKY67183-396LF is a wide-band low-noise amplifier with
superior gain flatness and exceptional linearity.
The compact 2 x 2 mm, 8-pin Dual Flat No Lead packaged LNA is
designed for FDD and TDD 4G LTE and 5G NR infrastructure
systems operating from 400 to 6000 MHz.
The internal active bias circuitry provides stable performance over
temperature and process variation.
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
Figure 2. SKY67183-396LF Pinout
(Top View)
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 2
Table 1. SKY67183-396LF Signal Descriptions
Pin Name Description Pin Name Description
1 N/C No connection (may be connected to ground with no change
in performance) 5 EN Enable voltage to LNA
2 RFIN RF input (DC blocking capacitor required) 6 VDD VDD voltage to LNA
3 VBIAS Bias voltage for input gate 7 RFOUT RF output. DC blocking capacitor is required.
4 RSET External resistor to set bias current 8 N/C No connection (may be connected to ground with no change
in performance)
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY67183-396LF are
provided in Table 2. Recommended operating conditions are
shown in Table 3. Thermal data is shown in Table 4.
Electrical specifications are provided in Tables 5 and 6.
Table 2. SKY67183-396LF Absolute Maximum Ratings1
Parameter Symbol Minimum Maximum Units
Supply voltage VDD 5.5 V
LNA enable EN -0.5 2.8 V
Quiescent supply current IDQ 100 mA
RF input power (C/W) PIN +22 dBm
Storage temperature TSTG -40 +150 °C
Operating temperature TA -40 +115 °C
Junction temperature TJ +150 °C
Electrostatic discharge:
Charged Device Model (CDM), Class C3
Human Body Model (HBM), Class 1A
ESD
1000
250
V
V
1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set
at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection.
Industry-standard ESD handling precautions should be used at all times.
Table 3. SKY67183-396LF Recommended Operating Conditions
Parameter Symbol Min Typ Max Units
Supply voltage VDD 3.3 5.0 5.25 V
LNA enable:
ON
OFF
EN
1.17
0
1.8
0.63
2.4
V
V
u xx
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 3
Table 4. SKY67183-396LF Electrical Specifications: Thermal Data1
(VDD = 5.25 V, Enable = GND, TA = +25 °C, PIN = -20 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter Symbol Test Condition Min Typ Max Units
Thermal resistance θJC 90 °C/W
Channel temperature @ +105 °C reference
(package heat slug)
TJ VDD = 5.25 V, IDQ = 60 mA, RF
applied, dissipated power = 0.29 W
130 °C
1 Performance is guaranteed only under the conditions listed in this table.
Table 5. SKY67183-396LF Electrical Specifications: 4200 to 4900 MHz Optimized BoM in Table 81
(VDD = 5.0 V, Enable = GND, TA = +25 °C, PIN = -20 dBm, Characteristic Impedance [ZO] = 50 Ω, f = 4500 MHz, Unless Otherwise Noted)
Paramete
r
Symbol Test Condition Min Typ Ma
x
Units
RF Specifications
Noise figure NF
@ 4200 MHz
@ 4500 MHz
@ 4900 MHz
0.5
0.5
0.6
1.0
1.0
1.1
dB
dB
dB
Small signal gain |S21|
@ 4200 MHz
@ 4500 MHz
@ 4900 MHz
16.5
18.2
18.2
17.7
dB
dB
dB
Input return loss |S11|
@ 4200 MHz
@ 4500 MHz
@ 4900 MHz
12
16.1
32.8
21.9
dB
dB
dB
Output return loss |S22|
@ 4200 MHz
@ 4500 MHz
@ 4900 MHz
10
11.2
23.2
14.9
dB
dB
dB
Reverse isolation |S12|
@ 4200 MHz
@ 4500 MHz
@ 4900 MHz
26
32
32
32
dB
dB
dB
Third order output intercept
(-20 dBm input/1 MHz tone) OIP3
@ 4200 MHz
@ 4500 MHz
@ 4900 MHz
+27
+29
+29
+28.5
dBm
dBm
dBm
1 dB output compression point OP1dB
@ 4200 MHz
@ 4500 MHz
@ 4900 MHz
+16
+20
+19
+20
dBm
dBm
dBm
DC Specification
s
Supply voltage VDD 5.0
V
Quiescent current IDD 45 56 67 mA
Settling time 0.3 dB2
Settling time 0.1 dB3
TS1
TS2 @ 4500 MHz 0.3
0.31
0.9
0.9
us
us
1 Performance is guaranteed only under the conditions listed in this table.
2 Settling time 0.3 dB is measured from the time the PA enable reaches 50% of PA enable "on" level to the time at which the RF output power achieves within 0.3 dB of the average steady-state
“on” level.
3 Settling time 0.1 dB is measured from the time the PA enable reaches 50% of PA enable "on" level to the time at which the RF output power achieves within 0.1 dB of the average steady-state
“on” level.
Fm Kim) 4.2 uawmmmmww a: $3 EéEaso sees sing a. 4 4 7. 4 7 F! H 6.6 4m a 4. n e u 5 4m 5 F 4 4 4 4. 3. 4 3 4 4. M 098755 ososmfiwfiw a: :5 Ema 5% .msmaefimés Frequency (GHz) Frequency (GHz) 64 FEB E: 62 855: 05642 4 5 4.5 4.7 4.8 4.9 Frequency (GHz) 4.4 43 2 Frequency (GHz) 42
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 4
Typical Performance Characteristics
4200 to 4900 MHz (VDD = 5 V, PIN = -20 dBm, Characteristic Impedance [Zo] = 50 Ω, Unless Otherwise Noted)
Figure 3. Small Signal Gain (dB) vs Frequency (GHz)
Figure 5. Input Return Loss (dB) vs Frequency
Figure 7. Reverse Isolation (dB) vs Frequency (GHz)
Figure 4. Noise Figure (dB) vs Frequency (GHz)
Figure 6. Output Return Loss (dB) vs Frequency
Figure 8. IIP3 (dBm) vs Frequency (GHz)
m 4.3 44 4.5 as 4.1 4.3 49 Frequency (GHz] 024531012141613 Frequency(GHz) 202224 Reverse lsman'nn (dB) u 2 4 5 81012141515 Frequency(GHz| 202224 80a ityFaclor,u1 (dB) U12 3 4 5 e 7 a a101112131415151718192nz1222324 Frequency (GHZ) Gam (d5) Input Return Loss (:18) U 2 4 6 B W 12 M 15 Hi FrequencthHz) 202224 Output Return Loss (dB) n 2&531012141513202224 Frequency (GHZ) mama) a :9, u a. § E 012 3 4 5 a 7 e 910111213141515171a1szu21222324 Frequency (GHz)
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 5
Figure 9. OIP3 (dBm) vs Frequency (GHz)
Figure 11. Small Signal Gain (dB) vs Frequency (GHz)
Figure 13. Reverse Isolation (dB) vs Frequency (GHz)
Figure 15. Stability Factor, µ1 (dB) vs Frequency (GHz)
Figure 10. Gain (dB) vs PIN (dBm)
Figure 12. Input Return Loss (dB) vs Frequency (GHz)
Figure 14. Output Return Loss (dB) vs Frequency (GHz)
Figure 16. Stability Factor, µ2 (dB) vs Frequency (GHz)
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 6
Table 6. SKY67183-396LF Electrical Specifications: 3400 to 3800 MHz Optimized BoM in Table 91
(VDD = 5.0 V, Enable = GND, TA = +25 °C, PIN = -20 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter Symbol Test Condition Min Typ Max Units
RF Specifications
Noise figure NF
@ 3400 MHz
@ 3600 MHz
@ 3800 MHz
0.43
0.44
0.48
dB
dB
dB
Gain |S21|
@ 3400 MHz
@ 3600 MHz
@ 3800 MHz
19.2
19.1
18.9
dB
dB
dB
Input return loss |S11|
@ 3400 MHz
@ 3600 MHz
@ 3800 MHz
15
21.3
31.2
dB
dB
dB
Output return loss |S22|
@ 3400 MHz
@ 3600 MHz
@ 3800 MHz
11.6
16.3
19.9
dB
dB
dB
Reverse isolation |S12|
@ 3400 MHz
@ 3600 MHz
@ 3800 MHz
32.9
32.4
32.1
dB
dB
dB
Third order output intercept point OIP3
PIN = -20 dBm, Δ Tone = 1 MHz:
@ 3400 MHz
@ 3600 MHz
@ 3800 MHz
+30.4
+28.9
+34.3
dBm
dBm
dBm
1 dB output compression point OP1dB
@ 3400 MHz
@ 3600 MHz
@ 3800 MHz
+20.2
+20.1
+20.6
dBm
dBm
dBm
DC Specifications
Supply voltage VDD 5.0 V
Quiescent current IDD 56 mA
Settling time 0.3 dB2
Settling time 0.1 dB3
TS1
TS2 @ 3600 MHz
0.28
0.29
us
us
1 Verified by characterization.
2 Settling time 0.3 dB is measured from the time the PA enable reaches 50% of PA enable "on" level to the time at which the RF output power achieves within 0.3 dB of the average steady-
state “on” level.
3 Settling time 0.1 dB is measured from the time the PA enable reaches 50% of PA enable "on" level to the time at which the RF output power achieves within 0.1 dB of the average steady-
state “on” level.
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 7
Table 7. SKY67183-396LF Electrical Specifications: 2300 to 2700 MHz Optimized BoM in Table 101
(VDD = 5.0 V, Enable = GND, TA = +25 °C, PIN = -20 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter Symbol Test Condition Min Typ Max Units
RF Specifications
Noise figure NF
@ 2300 MHz
@ 2500 MHz
@ 2700 MHz
0.36
0.41
0.43
0.75
0.75
0.85
dB
dB
dB
Gain |S21|
@ 2300 MHz
@ 2500 MHz
@ 2700 MHz
20
20
19
21.7
21.4
20.9
dB
dB
dB
Input return loss |S11|
@ 2300 MHz
@ 2500 MHz
@ 2700 MHz
9
10
10
13
16.4
18.7
dB
dB
dB
Output return loss |S22|
@ 2300 MHz
@ 2500 MHz
@ 2700 MHz
7
9
9
11.2
13.5
12.6
dB
dB
dB
Reverse isolation |S12|
@ 2300 MHz
@ 2500 MHz
@ 2700 MHz
33.8
33.4
33.2
dB
dB
dB
Third order output intercept point OIP3
PIN = -20 dBm, Δ Tone = 1 MHz:
@ 2300 MHz
@ 2500 MHz
@ 2700 MHz
29
29
29
+32.2
+32.7
+33.4
dBm
dBm
dBm
1 dB output compression point OP1dB
@ 2300 MHz
@ 2500 MHz
@ 2700 MHz
18
20
20
+19.5
+22
+22.1
dBm
dBm
dBm
DC Specifications
Supply voltage VDD 5.0 V
Quiescent current IDD 56 mA
Settling time 0.3 dB2
Settling time 0.1 dB3
TS1
TS2 @ 2500 MHz
0.3
0.33
us
us
1 Verified by characterization.
2 Settling time 0.3 dB is measured from the time the PA enable reaches 50% of PA enable "on" level to the time at which the RF output power achieves within 0.3 dB of the average steady-
state “on” level.
3 Settling time 0.1 dB is measured from the time the PA enable reaches 50% of PA enable "on" level to the time at which the RF output power achieves within 0.1 dB of the average steady-
state “on” level.
rmquenw (6H1) _ m _1§°C —55“C —us“c m mum Ram!" um (nab u :1 2; m queer (6H1) _Aa'c —25”: —as': _ns~c n z) Rivers: mammal nequencv (5H1) , § —4ch , . —15'c \\ —s§'c E m —nsvc Fvefluencv 1:.sz _Jo'c —25°C ~ —zs°c —115°c omum Ralum Loss (as) nequencv (5H1) _ m —m 1‘0 _m _“sac m E 3 no as Fvequenw 45sz
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 8
Typical Performance Characteristics
2300 to 2700 MHz, (VDD = 5 V, TA = +25 °C, PIN = -20 dBm, Characteristic Impedance (Zo) = 50 Ω, Unless Otherwise
Noted)
Figure 17. Small Signal Gain (dB) vs Frequency (GHz) Figure 18. Noise Figure (dB) vs Frequency (GHz)
Figure 19. Input Return Loss (dB) vs Frequency Figure 20. Output Return Loss (dB) vs Frequency
Figure 21. Reverse Isolation (dB) vs Frequency (GHz) Figure 22. IIP3 (dBm) vs Frequency (GHz)
w m —m'c —fln°c M —25°C ‘ —zs~c _WC m _WC u,“ —1Is“c —ns‘>c H .;;n g m E a ‘ / z % cm W M m m m M u ,. H , ,x H u mmmm) mquemmm n § v- ; —4u~c , w _zs~c _ss°€ —us*c m mqmmem mqmmem n m ,1 _ q - m m E E E E 3 y, 571" a i m g "‘ gm : ,4 § w WC 5 _AMC _15«c o n _zs»c m —xs”t ,g —us~c w I,“ n} x ,1 g, A, mmm:mmmnumww 01>: ,; mmm:mmmnumww mqmmem mqmmem 5 s g a? 3 a «:27 § 2, LL , LL A 1 ’ A ‘7 2 m , 5 0 ‘ ‘ ‘ ‘ ‘ ‘ ‘ ‘ a ‘ ‘ ‘ ‘ ‘ ‘ ‘ o 2 A s a m «2 u «s n; no u z . 5 a m a 15 us m 20 Frequency (Griz) Frequency (6H2)
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 9
Figure 23. OIP3 (dBm) vs Frequency (GHz) Figure 24. OP1dB (dBm) vs Frequency (GHz)
Figure 25. Small Signal Gain (dB) vs Frequency (GHz) Figure 26. Input Return Loss (dB) vs Frequency (GHz)
Figure 27. Reverse Isolation (dB) vs Frequency (GHz) Figure 28. Output Return Loss (dB) vs Frequency (GHz)
Figure 29. Stability Factor, 1 (dB) vs Frequency (GHz) at -40 °C Figure 30. Stability Factor, 2 (dB) vs Frequency (GHz) at -40 °C
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 10
Table 8. SKY67183-396LF Electrical Specifications: 1700 to 2200 MHz Optimized BOM in Table 101
(VDD = 5.0 V, Enable = GND, TA = +25 °C, PIN = -20 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter Symbol Test Condition Min Typ Max Units
RF Specifications
Noise figure NF
@ 1700 MHz
@ 1950 MHz
@ 2200 MHz
0.34
0.38
0.41
0.75
0.75
0.85
dB
dB
dB
Gain |S21|
@ 1700 MHz
@ 1950 MHz
@ 2200 MHz
21.5
21
19.5
23.2
22.7
21.5
dB
dB
dB
Input return loss |S11|
@ 1700 MHz
@ 1950 MHz
@ 2200 MHz
10
10
10
15.7
26.2
14.8
dB
dB
dB
Output return loss |S22|
@ 1700 MHz
@ 1950 MHz
@ 2200 MHz
7
10
10
9.7
25.2
20.6
dB
dB
dB
Reverse isolation |S12|
@ 1700 MHz
@ 1950 MHz
@ 2200 MHz
34.4
34.2
34.6
dB
dB
dB
Third order output intercept point OIP3
PIN = -20 dBm, Δ Tone = 1 MHz:
@ 1700 MHz
@ 1950 MHz
@ 2200 MHz
28
28
28
+31.8
+32.2
+32.5
dBm
dBm
dBm
1 dB output compression point OP1dB
@ 1700 MHz
@ 1950 MHz
@ 2200 MHz
17.5
18.0
19.0
+19.1
+20.2
+21.1
dBm
dBm
dBm
DC Specifications
Supply voltage VDD 5
V
Quiescent current IDD 56
mA
Settling time 0.3 dB2
Settling time 0.1 dB3
TS1
TS2 @ 1950 MHz 0.3
0.33
us
us
1 Verified by characterization.
2 Settling time 0.3 dB is measured from the time the PA enable reaches 50% of PA enable "on" level to the time at which the RF output power achieves within 0.3 dB of
the average steady state “on” level.
3 Settling time 0.1 dB is measured from the time the PA enable reaches 50% of PA enable "on" level to the time at which the RF output power achieves within 0.1 dB of
the average steady state “on” level.
\npu Rem" Lam mm Reverse Isolallm (dBr smalls male was) 20 18 1 9 2 Frequency (GHu <9 2="" frequency="" (ghzx="" ‘="" q="" 2="" frequency="" (5qu="" 21="" 22="" i="" ’="" —="" wk="" 1;="" :5="" u="" 1="" 1="" —ws'n="" 10="" —11:~"c="" en,="" em/="" gm="" ‘chcuyfihhlj="" a="" h="" _m="" gm‘="" —115°c="" 345="" \="" e="" gm="" m,="" g="" 5_="" frequency="" aghz)="" e="" ejeid="" 70="" ’re‘qupr‘ry="" (m="" m="">
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 11
Typical Performance Characteristics
1700 to 2200 MHz (VDD = 5 V, PIN = -20 dBm, Characteristic Impedance [Zo] = 50 Ω, Unless Otherwise Noted
Figure 31. Small Signal Gain (dB) vs Frequency (GHz)
Figure 33. Input Return Loss (dB) vs Frequency
Figure 32. Noise Figure (dB) vs Frequency (GHz)
Figure 35. Reverse Isolation (dB) vs Frequency (GHz)
Figure 34. Output Return Loss (dB) vs Frequenc
y
Figure 36. IIP3 (dBm) vs Frequency (GHz)
3m // 11 m mm [mam mm mam, n; m —er _m H 235 —wr in, nu n; u s: z u 11 u HPum y {m w) 4o : 2n c § 0 E 720 3‘ an E 130 '5” 4m m) ,3; r ‘ 2 :. ; 1 < 7="" a="" smtmzmmtsmw‘mszo="" frequency="" mm="" a="" u="" m="" 75="" z:="" a="" s="" m="" 3340="" g="" 13="" g="" 45="" e;="" 73="" e="" 2“="" as="s" m="" g,="" 5‘="" —ac”c="" o="" 25="" ,w="" —25“c="" so="" —55’:="" '="" ’3="">
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 12
Figure 38. OP1dB (dBm) vs Frequency (GHz)
Figure 39. Small Signal Gain (dB) vs Frequency (GHz) Figure 40. Input Return Loss (dB) vs Frequency (GHz)
Figure 41. Reverse Isolation (dB) vs Frequency (GHz) Figure 42. Output Return Loss (dB) vs Frequency (GHz)
Figure 37. OIP3 (dBm) vs Frequency (GHz)
Svablmy Factor, pl ma) \ 4 I 5 I a \ 7 W‘\‘\‘\'1'\'I'\‘\‘\‘\‘\‘ a 51011121314151617181920 FrequenCv (6N1) Slam y Facial v2 we) |\\ 567 \\\|\J\\\\ll a 91011121314151517131920 Frequentv (6H1) .m a
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 13
Figure 43. Stability Factor, µ1 (dB) vs Frequency (GHz) at -40 °C Figure 44. Stability Factor, µ2 (dB) vs Frequency (GHz) at -40 °C
M © 09 03 H CH 3; Cl (:2 4M; MCL K cwi 7 H 2 RH“ RFOUT 7 L2 1 ' i H i I 3 a * 012 « vas m r J; l U 3 fRSET EN “ : N4 ca “W‘ Hw c5 fl L1H c7 mamm— DEM G-Pm Header
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 14
Evaluation Board Description
The SKY67183-396LF Evaluation Board is used to test the
performance of the SKY67183-396LF LNA. An Evaluation Board
schematic diagram is shown below. Bill of Materials (BOMs) for
Evaluation Boards optimized for 4200 to 4900 MHz, 3400 to
3800, 2300 to 2700 MHz, and 1700 to 2200 MHz appear in the
following pages. An EVB assembly diagram is shown in Figure 46,
layer details appear in Figure 47.
Figure 45. SKY67183-396LF Evaluation Board Schematic
Table 9. SKY67183-396LFEK1 Evaluation Board Bill of Materials (BOM) for 4200 to 4900 MHz Tuning
Component Value Size Part Number
C1 1.8 pF 0402 GJM1555C1H1R8BB01D
C2 0.8 nH 03015 LQW04AN0N8C00D
C3 0.4 pF 0402 GJM1555C1HR40WB01D
C4 DNI
C5 DNI
C6 DNI
C7 4.7 uF 0402 GRM155C80J475MEAAD
C8 2.2 pF 0402 GRM1555C1H2R2BA01D
C9 0 Ω 0402 Not critical
C10 1.0 nH 0402 LQG15HS1N0S02D
C11 DNI
C12 DNI
L1 18 nH 0402 LQW15AN18NG8ZD
L2 6.2 nH 0402 LQG15HS6N2S02D
R1 8.2 kΩ 0201 Not critical
R2 DNI
R4 100 Ω 0201 Not critical
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 15
Table 10. SKY67183-396LFEK2 Evaluation Board Bill of Materials (BOM) for 3400 to 3800 MHz Tuning
Component Value Size Part Number
C1 1.8 pF 0402 GJM1555C1H1R8BB01
C2 1.8 nH 0402 LQW15AN1N8C00
C3 0.4 pF 0402 GJM1555C1HR40WB01D
C4 DNI
C5 DNI
C6 DNI
C7 4.7 uF 0402 GRM155C80J475MEAAD
C8 5.6 pF 0402 GRM1555C1H5R6BA01D
C9 0 Ω 0402 Not critical
C10 1.8 nH 0402 LQG15HS1N8S02D
C11 DNI
C12 DNI
L1 12 nH 0402 LQW15AN12NG8ZD
L2 5.6 nH 0402 LQG15HS5N6S02D
R1 8.2 kΩ 0201 Not critical
R2 DNI
R4 100 Ω 0201 Not critical
Table 11. SKY67183-396LFEK3 Evaluation Board Bill of Materials (BOM) for 2300 to 2700 MHz Tuning
Component Value Size Part Number
C1 5.0 pF 0402 GJM1555C1H5R0BB01D
C2 2.7 nH 0402 LQW15AN2N7B8ZD
C3 0.4 pF 0402 GJM1555C1HR40WB01D
C4 10 pF 0402 GRM1555C1H100JA01D
C5 DNI
C6 DNI
C7 4.7 uF 0402 GRM155C80J475MEAAD
C8 22 pF 0402 GRM1555C1H220JA01
C9 1.8 pF 0402 GRM1555C1H1R8BA01D
C10 3.3 nH 0402 LQG15HS3N3S02D
C11 DNI
C12 DNI
L1 22 nH 0402 LQW15AN22NG8ZD
L2 5.6 nH 0402 LQG15HS5N6S02D
R1 8.2 kΩ 0201 Not critical
R2 DNI
R4 100 Ω 0201 Not critical
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 16
Table 12. SKY67183-396LFEK4 Evaluation Board Bill of Materials (BOM) for 1700 to 2200 MHz Tuning
Component Value Size Part Number
C1 5.0 pF 0402 GJM1555C1H5R0BB01D
C2 4.7 nH 0402 LQW15AN4N7B8ZD
C3 0.4 pF 0402 GJM1555C1HR40WB01D
C4 15 pF 0402 GRM1555C1H150JA01D
C5 DNI
C6 DNI
C7 4.7 uF 0402 GRM155C80J475MEAAD
C8 22 pF 0402 GRM1555C1H220JA01
C9 1.8 pF 0402 GRM1555C1H1R8BA01D
C10 6.2 nH 0402 LQG15HS6N2S02D
C11 300 Ohm 0402 ERJ-2RKF3000C
C12 DNI
L1 22 nH 0402 LQW15AN22NG8ZD
L2 5.6 nH 0402 LQG15HS5N6S02D
R1 8.2 KOhm 0201 ERJ-1GNF8201C
R2 DNI
R4 100 Ohm 0201 ERJ-1GNF1000C
HITH \_m_u SOVOHM TRACE EDVOHM IRACE CROSS SECTION NAME THICKNESS MATERIALS m 4/st , m ,7 IMMK D 0mm“ SOLDER RESIST 1%: 3;? W H I! 047m" ETNISHID Cu ' m ' ° 3““ mm mm n 254nm ROASSOB LZ D 018"!“ [“70 5M DIELECTRIC l3 900nm H14 (4 34] E ‘ L3 u 018nm Cure Snz W W W m {infirm my“ 3355;ng E E, m u SsNIA [Pu Nil BMASK D 020nm SULDER RE5I5T | mm nucmss Lam". m: .1. 101 mm
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 17
Figure 46. SKY67183-396LF EVB Assembly Diagram
Figure 47. SKY67183-396LF EVB Layer Details
Pm t \udlcatm ‘0 Sk mks / /Pam‘lumhe‘ SKY . v XXXX : DVL Code Exgvgzgggg; \ 671 83 mohauacmr: on Code \ZXXXX/ Charaaevs 2 Waugh 4 : Lo! Numhev game 020 EX 0.70 R020 —> <7 bx="" 045="" pm="" 1="" \a‘="" aa‘="" 050mm="" —="" —-="" +—="" f+="" e="" ‘="" 0.25%="" \="" 2x="" 0,454‘="" ah="" mmenmm="" arem="" mun/mater:="" en—="" 43+="" zxubs="" :e:="" $="" 4—="" exposed="" sowder="" areas="" (tyvical)="" mm="">
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 18
Package Dimensions
Typical part marking for the SKY67183-396LF is shown in
Figure 48, PCB layout footprint is provided in Figure 49.
Package dimensions are shown in Figure 50. Tape and reel
dimensions are shown in Figure 51.
Package and Handling Information
Instructions on the shipping container label regarding exposure
to moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKY67183-396LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 °C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application
Note, Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Figure 48. SKY67183-396LF Typical Part Marking
Figure 49. SKY67183-396LF PCB Layout Footprint
asthma/4115 0.2a Rel E] >411 Seaung wane 7—» e u 45 +0 05/70 07 a pm <—n 02="" +0="" aw:="" n2="" \exunsed="" pam”="" inmcamr="" \\="" i="" 3;="" ‘="" o="" r’="" 5="" f="" 1th:="" e="" $="" howie/ms="" detau="" a="" \="" ,="" _="" 2x="" [sw="" ax="" a="" z="" pimesj="" d"="" ,="" ,u="" as="" must-om="" ;="" m="" demll="" c="" f="" 2x="" a="" 015="" 0,75="" $0.05="" a="" «="" top="" view="" side="" view="" bottom="" view="" \="" r012="" typ="" t="" 1="" o="" 30="" z="" 0.10="" \="" ‘="" r020="" \="" q="" pin="" ‘="" indicamv="" ‘="" .="" 0.25="" mus/«(1.07="" @="" ‘="" d3="" detail="" a="" mme:="" 1="" all="" mmurmnbl="" m="" m="" mm».-="" 2="" drmumans="" my="" mums="" amurmng="" masme="" m="" 5114.va="" 3="" wmmmmm="" 1.7="" ms="" emmi!="" hurmkgmumwd="" as="" well="" as="" my="" tannins/x="" 2mm="" m="" 1="" pw]="" nawmnwmmmmmmww="" (5m!="" 2504="" 5="" 17mm"="" mm:="" in="" mew/m1="" lemma!="" and/s="" measure/1="" mm”="" a="" 15="" mm="" and="" a="" 30="" mm="" (mm="" mmmamfl="">
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 19
Figure 50. SKY67183-396LF Package Dimensions
(3150+ 0.10/—0,00 4.00:0,10 2.00:0.05 11510.10 4.00 (see Note 4) 030:0,05m Fir” *\ V‘ —7 u, o c; v-. 0 cl 0 \ - g 3. Li «a c; g 8. N no , L 100 1K0) $1.00 Min R030 Typ Detail B 230 (A0) 4—» M71855 1 Barnabas. black cammcnve flab/styrene. 2 can» tape man/val, nanspalenf mndumve H54 3 Cover [age we: 5 40 mm mum, , 4 Ian Smyrna/s Mm Lam/laws tale/army : ,n 20 mm Data“ A 5 5517 surface resisnwry Is :1 x we ahms/squm per EIA, JEDEC mm m tape and reel sneer/mama. 6 All and 817 measuremempmm to be 0 30 mm from Darryl" packs]. 7 All measurements are m Inr‘llrrrlslers.
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 20
Figure 51. SKY67183-396LF Tape and Reel Dimensions
DATA SHEET • SKY67183-396LF: 400 TO 6000 MHz BROADBAND LNA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204480J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 26, 2021 21
Ordering Information
Part Number Product Description Evaluation Board Part Number
SKY67183-396LF 400 to 6000 MHz Broadband Low-Noise Amplifier
SKY67183-396EK1 (4.2 to 4.9 GHz Tuning)
SKY67183-396EK2 (3.4 to 3.8 GHz Tuning)
SKY67183-396EK3 (2.3 to 2.7 GHz Tuning)
SKY67183-396EK4 (1.7 to 2.2 GHz Tuning)
Copyright © 2021 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc. or its subsidiaries in the United States and other countries. Third-party brands and names
are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.