Stepper Motors

Results: 4

Filters

Stacked

Scrolling

Applied FiltersRemove All

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Type	Coil Type	Voltage - Rated	Current Rating (Amps)	Steps per Revolution	Step Angle	Accuracy	Torque - Holding (oz-in / mNm)	Size / Dimension	NEMA Frame Size	Diameter - Shaft	Length - Shaft and Bearing	Mounting Hole Spacing	Termination Style	Operating Temperature	Coil Resistance	Features

QSH2818-32-07-006 STEP MOTOR HYBRID BIPOLAR 3.8V Analog Devices Inc./Maxim Integrated	62 In Stock	1 : ¥475.49000 Box	QMot QSH2818	Box	Active	Hybrid	Bipolar	3.8VDC	670 mA	200	1.8°	±5%	8.49 / 60	Square - 1.100" x 1.100" (28.00mm x 28.00mm)	11	0.197" (5.00mm)	0.787" (20.00mm)	0.905" (22.98mm)	Wire Leads	-20°C ~ 50°C	5.6 Ohms	Flatted Shaft
QSH2818-32-07-006-8K STEP MOTOR HYBRID NEMA11 ENC 819 Analog Devices Inc./Maxim Integrated	10 In Stock	1 : ¥1,323.42000 Bulk	QMot QSH2818	Bulk	Active	Hybrid	Bipolar	3.8VDC	670 mA	200	1.8°	±5%	8.49 / 60	Square - 1.100" x 1.100" (28.00mm x 28.00mm)	11	0.197" (5.00mm)	0.787" (20.00mm)	0.906" (23.00mm)	Wire Leads	-20°C ~ 50°C	5.6 Ohms	Flatted Shaft
QSH2818-51-07-012-8K STEP MOTOR HYBRID NEMA11 ENC 819 Analog Devices Inc./Maxim Integrated	2 In Stock	1 : ¥1,468.33000 Bulk	QMot QSH2818	Bulk	Active	Hybrid	Bipolar	6.2VDC	670 mA	200	1.8°	±5%	17 / 120	Square - 1.100" x 1.100" (28.00mm x 28.00mm)	11	0.197" (5.00mm)	0.787" (20.00mm)	0.906" (23.00mm)	Wire Leads	-20°C ~ 50°C	9.2 Ohms	Flatted Shaft
QSH2818-51-07-012 STEP MOTOR HYBRID BIPOLAR 6.2V Analog Devices Inc./Maxim Integrated	0 In Stock Check Lead Time	1 : ¥629.04000 Box	QMot QSH2818	Box	Active	Hybrid	Bipolar	6.2VDC	670 mA	200	1.8°	±5%	17 / 120	Square - 1.100" x 1.100" (28.00mm x 28.00mm)	11	0.197" (5.00mm)	0.787" (20.00mm)	0.905" (22.98mm)	Wire Leads	-20°C ~ 50°C	9.2 Ohms	Flatted Shaft

Showing

of 4

Stepper Motors

Stepper motors are DC voltage motion actuators that move in discrete steps. Multiple sets of coils organized in groups called "phases" determine the motors armature position. Energizing each phase in sequence causes armature rotation one step at a time. With computer or microcontroller managed stepping, precise positioning and/or speed control is achieved. Steppers are selected by torque, steps per revolution, step angle, NEMA frame size, coil resistance, polarity and shaft features.