Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LT3041ADE#PBF IC REG LINEAR POS ADJ 1A 14DFN Analog Devices Inc.	380 In Stock	1 : ¥71.26000 Tray	-	Tray	Active	Positive	Adjustable	1	20V	0.2V	15V	0.48V @ 1A	1A	-	50 mA	100dB ~ 60dB (120Hz ~ 10MHz)	Current Limit, Enable, Power Good, Soft Start, Tracking	Over Current, Over Temperature, Reverse Current, Reverse Polarity, Short Circuit, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	Surface Mount	14-WFDFN Exposed Pad	14-DFN (4x3)
NCP730BMT1500TBG IC REG LINEAR 15V 150MA 6WDFN onsemi	14,994 In Stock	1 : ¥7.39000 Cut Tape (CT) 3,000 : ¥2.99069 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	38V	15V	-	0.48V @ 150mA	150mA	3 µA	450 µA	80dB ~ 48dB (10Hz ~ 1MHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	Surface Mount	6-WDFN Exposed Pad	6-WDFN (2x2)
LT3022IMSE-1.8#PBF IC REG LINEAR 1.8V 1A 16MSOP Analog Devices Inc.	96 In Stock	1 : ¥77.99000 Tube	-	Tube	Active	Positive	Fixed	1	10V	1.8V	-	0.285V @ 1A	1A	3.5 mA	36 mA	66dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	16-TFSOP (0.118", 3.00mm Width) Exposed Pad	16-MSOP-EP

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.