Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

AP2112K-3.3TRG1 IC REG LINEAR 3.3V 600MA SOT25 Diodes Incorporated	184,121 In Stock 2,373,000 Factory	1 : ¥2.87000 Cut Tape (CT) 3,000 : ¥0.82775 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	3.3V	-	0.4V @ 600mA	600mA	80 µA	-	65sB (100Hz ~ 1KHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	SC-74A, SOT-753	SOT-25
AP7370-33Y-13 IC REG LINEAR 3.3V 300MA SOT89-3 Diodes Incorporated	53,612 In Stock	1 : ¥3.53000 Cut Tape (CT) 2,500 : ¥0.99740 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	18V	3.3V	-	0.6V @ 100mA	300mA	2.5 µA	300 µA	-	-	Over Current, Over Temperature, Reverse Current, Short Circuit	-40°C ~ 125°C (TJ)	Surface Mount	TO-243AA	SOT-89-3
MIC5239-3.3YS-TR IC REG LINEAR 3.3V 500MA SOT223 Microchip Technology	11,106 In Stock	1 : ¥29.39000 Cut Tape (CT) 2,500 : ¥22.24880 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	30V	3.3V	-	0.35V @ 500mA (Typ)	500mA	45 µA	15 mA	-	Enable	Over Current, Over Temperature, Over Voltage, Reverse Polarity	-40°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-3

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.