Thyristors

Results: 4
Manufacturer
Littelfuse Inc.STMicroelectronics
Series
SIDACtor®SMP, TRISIL™
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)Tube
Voltage - Breakover
15V25V77V180V
Voltage - Off State
6V8V58V140V
Current - Peak Pulse (8/20µs)
150 A250 A400 A5 kA
Current - Peak Pulse (10/1000µs)
45 A75 A100 A
Current - Hold (Ih)
50 mA150 mA
Capacitance
55pF60pF155pF650pF
Mounting Type
Surface MountThrough Hole
Package / Case
DO-214AA, SMBTO-218-3, TO-218AC
Supplier Device Package
DO-214AASMBTO-218AC
Stocking Options
Environmental Options
Media
Marketplace Product
4Results
Showing
of 4
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Voltage - Breakover
Voltage - Off State
Voltage - On State
Current - Peak Pulse (8/20µs)
Current - Peak Pulse (10/1000µs)
Current - Hold (Ih)
Number of Elements
Capacitance
Mounting Type
Package / Case
Supplier Device Package
DO-214AA
SMP75-8
THYRISTOR 8V 250A DO214AA
STMicroelectronics
2,749
In Stock
1 : ¥5.66000
Cut Tape (CT)
2,500 : ¥2.15998
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
15V
8V
-
250 A
75 A
50 mA
1
60pF
Surface Mount
DO-214AA, SMB
SMB
DO-214AA, SMB
P0080SAMCLRP
THYRISTOR 6V 150A DO214AA
Littelfuse Inc.
16,088
In Stock
1 : ¥10.10000
Cut Tape (CT)
2,500 : ¥4.16533
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
25V
6V
4 V
150 A
45 A
50 mA
1
55pF
Surface Mount
DO-214AA, SMB
DO-214AA
DO-214AA, SMB
P0640SCLRP
THYRISTOR 58V 400A DO214AA
Littelfuse Inc.
200,651
In Stock
1 : ¥11.49000
Cut Tape (CT)
2,500 : ¥4.74143
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
77V
58V
4 V
400 A
100 A
150 mA
1
155pF
Surface Mount
DO-214AA, SMB
DO-214AA
TO-218-3, TO-218AC
P1500MEL
THYRISTOR 140V 5KA TO218-3
Littelfuse Inc.
238
In Stock
1 : ¥58.29000
Tube
Tube
Active
180V
140V
4 V
5 kA
-
50 mA
1
650pF
Through Hole
TO-218-3, TO-218AC
TO-218AC
Showing
of 4

Thyristors

Thyristor-based Transient Voltage Suppression (TVS) devices are over-voltage protection devices that approximate an open circuit under normal operating conditions. Application of a voltage across them in excess of some specific value called the breakover voltage causes them to enter a conductive state approximating a short circuit. This state persists until current flow through the device is reduced below a minimum value called "hold current" by some outside influence within the circuit.