Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

S-1317A33-A4T2U4 IC REG LINEAR 3.3V 100MA HSNT4-B ABLIC Inc.	25,132 In Stock	1 : ¥11.16000 Cut Tape (CT) 10,000 : ¥4.33012 Tape & Reel (TR)	S-1317	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.02V @ 10mA	100mA	530 nA	-	-	Over Current	-40°C ~ 85°C (TA)	Surface Mount	4-SMD, Flat Leads Exposed Pad	HSNT-4-B
TCR5RG28A,LF LDO REG, IOUT: 500MA VOUT: 2.8V Toshiba Semiconductor and Storage	3,737 In Stock	1 : ¥4.27000 Cut Tape (CT) 5,000 : ¥1.13095 Tape & Reel (TR)	TCR5RG	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	2.8V	-	0.21V @ 500mA	500mA	13 µA	100dB ~ 59dB (1kHz ~ 1MHz)	-	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	4-XFBGA, WLCSP	4-WCSPF (0.65x0.65)
TCR5RG18A,LF LDO REG, IOUT: 500MA VOUT: 1.8V Toshiba Semiconductor and Storage	5 In Stock	1 : ¥4.27000 Cut Tape (CT) 5,000 : ¥1.13095 Tape & Reel (TR)	TCR5RG	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	1.8V	-	0.29V @ 500mA	500mA	13 µA	100dB ~ 59dB (1kHz ~ 1MHz)	-	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	4-XFBGA, WLCSP	4-WCSPF (0.65x0.65)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.