Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

AP2112K-3.3TRG1 IC REG LINEAR 3.3V 600MA SOT25 Diodes Incorporated	183,588 In Stock 2,433,000 Factory	1 : ¥2.87000 Cut Tape (CT) 3,000 : ¥0.82775 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	3.3V	-	0.4V @ 600mA	600mA	80 µA	-	65sB (100Hz ~ 1KHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C	-	-	Surface Mount	SC-74A, SOT-753	SOT-25
BD00IC0WEFJ-E2 IC REG LINEAR POS ADJ 1A 8HTSOP Rohm Semiconductor	2,108 In Stock	1 : ¥6.98000 Cut Tape (CT) 2,500 : ¥2.97184 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	5.5V	0.8V	4.5V	0.6V @ 1A	1A	0.25 mA	500 µA	-	Enable	Over Current, Over Temperature, Soft Start	-25°C ~ 85°C	-	-	Surface Mount	8-SOIC (0.154", 3.90mm Width) Exposed Pad	8-HTSOP-J
NCV8730ASNADJT1G IC REG LIN POS ADJ 150MA 5TSOP onsemi	10,335 In Stock	1 : ¥8.54000 Cut Tape (CT) 3,000 : ¥3.43975 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	38V	1.2V	24V	0.48V @ 150mA	150mA	3 µA	-	80dB ~ 42dB (10Hz ~ 100kHz)	Enable	Over Current, Over Temperature	-40°C ~ 125°C (TJ)	Automotive	AEC-Q100	Surface Mount	SOT-23-5 Thin, TSOT-23-5	5-TSOP

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.