4-UDFN Exposed Pad Power Distribution Switches, Load Drivers

Results: 2

Filters

Stacked

Scrolling

Applied FiltersRemove All

Showing

of 2

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Switch Type	Number of Outputs	Ratio - Input:Output	Output Configuration	Output Type	Interface	Voltage - Load	Voltage - Supply (Vcc/Vdd)	Current - Output (Max)	Rds On (Typ)	Input Type	Features	Fault Protection	Operating Temperature	Mounting Type	Supplier Device Package	Package / Case

XC8101AA01GR-G IC PWR SWITCH P-CHAN 1:1 4USP Torex Semiconductor Ltd	100 In Stock	1 : ¥4.93000 Cut Tape (CT) 3,000 : ¥1.89956 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	General Purpose	1	1:1	High Side	P-Channel	On/Off	1.8V ~ 6V	Not Required	200mA	550mOhm	Non-Inverting	Load Discharge	Current Limiting (Fixed)	-40°C ~ 85°C (TA)	Surface Mount	4-USP (1.2x1.6)	4-UDFN Exposed Pad
XC8102AA01GR-G IC PWR SWITCH P-CHAN 1:1 4USP Torex Semiconductor Ltd	30 In Stock	1 : ¥5.42000 Cut Tape (CT) 3,000 : ¥2.08591 Tape & Reel (TR)	XC8102	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	General Purpose	1	1:1	High Side	P-Channel	On/Off	1.2V ~ 6V	Not Required	400mA	350mOhm	Non-Inverting	Load Discharge	Current Limiting (Fixed)	-40°C ~ 85°C (TA)	Surface Mount	4-USP (1.2x1.6)	4-UDFN Exposed Pad

Showing

of 2

4-UDFN Exposed Pad Power Distribution Switches, Load Drivers

Products in this family are solid-state devices used to connect or interrupt the flow of current to a supported load, under the direction of a logic-level control signal that is of itself incapable or unsuitable for supplying the load. They integrate the semiconductor switching device used to interrupt current flow and incorporate additional supporting components/functions such as over-voltage clamping, current limiting, and under-voltage lockouts, which differentiate them from similar IC and discrete components.