Power Distribution Switches, Load Drivers

Results: 2
Manufacturer
Diodes IncorporatedTexas Instruments
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)
Switch Type
General PurposeUSB Switch
Output Type
N-ChannelP-Channel
Voltage - Load
1V ~ 5.5V2.7V ~ 5.5V
Current - Output (Max)
200mA3A
Rds On (Typ)
13.3mOhm95mOhm
Input Type
-Non-Inverting
Features
-Load Discharge, Slew Rate Controlled
Fault Protection
Current Limiting (Fixed), Over Temperature, Reverse Current, UVLOReverse Current
Supplier Device Package
6-DSBGAU-DFN2018-6
Package / Case
6-UFDFN Exposed Pad6-XFBGA, DSBGA
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Switch Type
Number of Outputs
Ratio - Input:Output
Output Configuration
Output Type
Interface
Voltage - Load
Voltage - Supply (Vcc/Vdd)
Current - Output (Max)
Rds On (Typ)
Input Type
Features
Fault Protection
Operating Temperature
Mounting Type
Supplier Device Package
Package / Case
YZP-6-BGA Pkg
TPS22964CYZPR
IC PWR SWITCH N-CHAN 1:1 6DSBGA
Texas Instruments
165,416
In Stock
1 : ¥7.55000
Cut Tape (CT)
3,000 : ¥2.92149
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
General Purpose
1
1:1
High Side
N-Channel
On/Off
1V ~ 5.5V
Not Required
3A
13.3mOhm
Non-Inverting
Load Discharge, Slew Rate Controlled
Reverse Current
-40°C ~ 85°C (TA)
Surface Mount
6-DSBGA
6-XFBGA, DSBGA
U-DFN2018-6
AP21410FM-7
IC PWR SWITCH P-CHAN 1:1 6UDFN
Diodes Incorporated
37,538
In Stock
225,000
Factory
1 : ¥3.45000
Cut Tape (CT)
3,000 : ¥1.22864
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
USB Switch
1
1:1
High Side
P-Channel
On/Off
2.7V ~ 5.5V
Not Required
200mA
95mOhm
-
-
Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
-40°C ~ 85°C (TA)
Surface Mount
U-DFN2018-6
6-UFDFN Exposed Pad
Showing
of 2

Power Distribution Switches, Load Drivers

Products in this family are solid-state devices used to connect or interrupt the flow of current to a supported load, under the direction of a logic-level control signal that is of itself incapable or unsuitable for supplying the load. They integrate the semiconductor switching device used to interrupt current flow and incorporate additional supporting components/functions such as over-voltage clamping, current limiting, and under-voltage lockouts, which differentiate them from similar IC and discrete components.