Power Distribution Switches, Load Drivers

Results: 2
Manufacturer
STMicroelectronicsVishay Siliconix
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)Tube
Number of Outputs
14
Output Configuration
High SideLow Side
Voltage - Load
1.1V ~ 5.5V7V ~ 50V
Current - Output (Max)
2A3.5A
Rds On (Typ)
44mOhm280mOhm
Input Type
-Non-Inverting
Features
-Slew Rate Controlled
Fault Protection
Current Limiting (Fixed), Open Load Detect, Over TemperatureReverse Current
Supplier Device Package
4-TDFN (1.2x1.6)20-HTSSOP
Package / Case
4-UFDFN Exposed Pad20-TSSOP (0.173", 4.40mm Width) Exposed Pad
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Switch Type
Number of Outputs
Ratio - Input:Output
Output Configuration
Output Type
Interface
Voltage - Load
Voltage - Supply (Vcc/Vdd)
Current - Output (Max)
Rds On (Typ)
Input Type
Features
Fault Protection
Operating Temperature
Mounting Type
Supplier Device Package
Package / Case
4-TDFN (1.2x1.6)
SIP32408DNP-T1-GE4
IC PWR SWITCH N-CHAN 1:1 4TDFN
Vishay Siliconix
32,606
In Stock
1 : ¥5.01000
Cut Tape (CT)
3,000 : ¥1.77366
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
General Purpose
1
1:1
High Side
N-Channel
On/Off
1.1V ~ 5.5V
Not Required
3.5A
44mOhm
Non-Inverting
Slew Rate Controlled
Reverse Current
-40°C ~ 125°C (TJ)
Surface Mount
4-TDFN (1.2x1.6)
4-UFDFN Exposed Pad
20-HTSSOP
IPS4260L
IC PWR SWTCH P-CHAN 1:1 20HTSSOP
STMicroelectronics
584
In Stock
1 : ¥26.03000
Tube
-
Tube
Active
General Purpose
4
1:1
Low Side
N-Channel
On/Off
7V ~ 50V
Not Required
2A
280mOhm
-
-
Current Limiting (Fixed), Open Load Detect, Over Temperature
-40°C ~ 125°C (TJ)
Surface Mount
20-HTSSOP
20-TSSOP (0.173", 4.40mm Width) Exposed Pad
Showing
of 2

Power Distribution Switches, Load Drivers

Products in this family are solid-state devices used to connect or interrupt the flow of current to a supported load, under the direction of a logic-level control signal that is of itself incapable or unsuitable for supplying the load. They integrate the semiconductor switching device used to interrupt current flow and incorporate additional supporting components/functions such as over-voltage clamping, current limiting, and under-voltage lockouts, which differentiate them from similar IC and discrete components.