Buffers, Drivers, Receivers, Transceivers

Results: 4

Filters

Stacked

Scrolling

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Logic Type	Number of Elements	Number of Bits per Element	Input Type	Output Type	Current - Output High, Low	Voltage - Supply	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

SN74LVC2G17DBVR IC BUF NON-INVERT 5.5V SOT23-6 Texas Instruments	124,689 In Stock	1 : ¥3.28000 Cut Tape (CT) 3,000 : ¥0.60581 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	2	1	Schmitt Trigger	Push-Pull	32mA, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	-	-	Surface Mount	SOT-23-6	SOT-23-6
SN74LVC1G17QDBVRQ1 IC BUF NON-INVERT 5.5V SOT23-5 Texas Instruments	11,835 In Stock	1 : ¥3.37000 Cut Tape (CT) 3,000 : ¥0.95771 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	Schmitt Trigger	Push-Pull	32mA, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	Automotive	AEC-Q100	Surface Mount	SC-74A, SOT-753	SOT-23-5
SN74LVC16245ADGGR IC TXRX NON-INVERT 3.6V 48TSSOP Texas Instruments	3,622 In Stock	1 : ¥12.07000 Cut Tape (CT) 2,000 : ¥5.11948 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Transceiver, Non-Inverting	2	8	-	3-State	24mA, 24mA	1.65V ~ 3.6V	-40°C ~ 125°C (TA)	-	-	Surface Mount	48-TFSOP (0.240", 6.10mm Width)	48-TSSOP
SN74AUP3G07DCUR IC BUFFER NON-INVERT 3.6V 8VSSOP Texas Instruments	3,417 In Stock	1 : ¥4.19000 Cut Tape (CT) 3,000 : ¥1.49089 Tape & Reel (TR)	74AUP	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	3	1	-	Open Drain	-, 4mA	0.8V ~ 3.6V	-40°C ~ 85°C (TA)	-	-	Surface Mount	8-VFSOP (0.091", 2.30mm Width)	8-VSSOP

Showing

of 4

Buffers, Drivers, Receivers, Transceivers

Logic buffers, drivers, receivers and transceivers allow isolated access to logic signals from one circuit for use in another circuit. Buffers pass their input signal, either unchanged or inverted, to their output and may be used to clean up a weak signal or drive a load. In a boolean logic simulator, a buffer is mainly used to increase propagation delay. Logic receivers and transceivers allow isolated communication between data buses.