Full Half-Bridge (H Bridge) Drivers

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Applications	Interface	Load Type	Technology	Rds On (Typ)	Current - Output / Channel	Current - Peak Output	Voltage - Supply	Voltage - Load	Operating Temperature	Features	Fault Protection	Mounting Type	Package / Case	Supplier Device Package

EPC2152ENGRT IC HALF BRIDGE DRVR 12.5A 12LGA EPC	21,106 In Stock	1 : ¥53.69000 Cut Tape (CT) 500 : ¥39.71272 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Half Bridge	Synchronous Buck Converters	Logic, PWM	Inductive, Capacitive	Gallium Nitride (GaN) FETs	8.5mOhm LS, 8.5mOhm HS	12.5A	-	11V ~ 13V	11V ~ 13V	-40°C ~ 150°C (TJ)	Bootstrap Circuit	UVLO	Surface Mount	12-WFLGA	12-LGA (3.85x2.59)
EPC23101ENGRT TRANS GAN 100V EPOWER STAGE EPC	7,246 In Stock	1 : ¥69.45000 Cut Tape (CT) 3,000 : ¥37.94163 Tape & Reel (TR)	ePower™	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Half Bridge	General Purpose	Logic	Inductive, Capacitive, Resistive	Gallium Nitride (GaN) FETs	3.3mOhm	65A	-	10V ~ 80V	10V ~ 80V	-40°C ~ 125°C (TJ)	Bootstrap Circuit, Slew Rate Controlled	ESD, UVLO	Surface Mount, Wettable Flank	14-PowerWFQFN	14-QFN (3.5x5)
EPC23102ENGRT IC HALF BRIDGE DRIVER 35A 13WQFN EPC	0 In Stock Check Lead Time	1 : ¥71.01000 Cut Tape (CT) 3,000 : ¥38.80394 Tape & Reel (TR)	ePower™	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Half Bridge	AC Motors, DC Motors, DC-DC Converters, General Purpose	Logic, PWM	Inductive, Capacitive, Resistive	Gallium Nitride (GaN) FETs	5.2mOhm LS, 5.2mOhm HS	35A	-	4.5V ~ 5.5V	10V ~ 80V	-40°C ~ 125°C (TJ)	Bootstrap Circuit	Current Limiting, ESD, Over Voltage, UVLO	Surface Mount, Wettable Flank	13-PowerWFQFN	13-WQFN-HR (3.5x5)

Showing

of 3

Full Half-Bridge (H Bridge) Drivers

Devices in the bridge driver PMIC (Power Management Integrated Circuit) family incorporate two or more power transistors along with circuitry required to operate them as switches under the control of an external device. The transistors are typically configured internally in series-connected pairs known as half-bridges, such that the junction between any given pair can be connected to either of two power supply rails. They are commonly used to translate low-level signals provided by a control device such as a microcontroller into the higher power signals required to operate an actuator such as a stepper or brushless motor.