SMP1302 Series Datasheet by Skyworks Solutions Inc.

'® 2? SKYWORKS“ & a % ,. * I
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200043AB • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 17, 2019 1
DATA SHEET
SMP1302 Series: Switch and Attenuator Plastic-Packaged
PIN Diodes
Applications
TV distribution and cellular base stations
High volume switch and attenuators
Features
Designed for base station and handset applications
Low-distortion design
Available in tape and reel packaging
Packages rated MSL1 @ 260 C per JEDEC J-STD-020
Skyworks Green
TM
products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green
TM
, document number
SQ04–0074.
Description
The SMP1302 series of plastic-packaged, surface-mountable,
low-capacitance (0.3 pF) silicon PIN diodes is designed for
high-volume switch and attenuator applications from 10 MHz to
beyond 10 GHz.
These diodes are designed for use in low-distortion TEE
attenuators with low drive current (maximum resistance at 1 mA
is 10 Ω) commonly used in TV distribution and cellular base
station applications. The nominal 50 μm I region width, combined
with a maximum resistance of 3 Ω at 10 mA, makes these diodes
useful in large signal switch applications.
The SMP1302 series provides single, dual, and quad diodes in a
selection of plastic packages including SOT-23, SOD-323, SC-79,
SC-88, and a small footprint SOD-882.
Table 1 describes the various packages and marking of the
SMP1302 series.
DATA SHEET • SMP1302 SERIES PIN DIODES
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2 September 17, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200043AB
Table 1. SMP1302 Series Packaging and Marking
Common Anode Single Single Quad Common
Cathode Single
SOT-23 SOD-323
Green™
SC-79
Green™ SC-88 SOD-882
Green™
SMP1302-078LF
Marking: XIX
SMP1302-040LF
Marking: W
SMP1302-003LF
Green™
Marking:RF9
SMP1302-011LF
Marking: RF
♦ SMP1302-079LF
Marking: Cathode
and C3
LS = 1.5 nH LS = 1.5 nH LS = 0.7 nH LS = 1.4 nH LS = 0.45 nH
SMP1302-078LF Pinout
Table 2 provides the signal pin assignments for the 6-pin SC-88
quad common cathode package.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SMP1302 series are
provided in Table 3. Electrical specifications are provided in
Table 4. Resistance versus temperature measurements are
provided in Table 5.
Typical performance characteristics of the SMP1302 series are
illustrated in Figures 1 to 4. Package dimensions are shown in
Figures 5 to 13 (odd numbers), and tape and reel dimensions are
provided in Figures 6 to 14 (even numbers).
Table 2. SMP1302-078LF Pin Signals
Pin Name Pin Name
1 Anode 1 4 Anode 3
2 Common cathode 5 Common cathode
3 Anode 2 6 Anode 4
DATA SHEET • SMP1302 SERIES PIN DIODES
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200043AB • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 17, 2019 3
Table 3. SMP1302 Series Absolute Maximum Ratings1
Parameter Symbol Minimum Maximum Units
Reverse voltage VR 200 V
Power dissipation @ 25 °C lead temperature PD 250 mW
Storage temperature TSTG -65 +150 C
Operating temperature TA -65 +150 C
Electrostatic discharge:
Human Body Model (HBM), Class 1C
ESD
1000
2000
V
1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set
at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection.
Industry-standard ESD handling precautions should be used at all times.
Table 4. SMP1302 Series Electrical Specifications1
(TA = +25 C, Unless Otherwise Noted)
Parameter Symbol Test Condition Min Typ Max Units
Reverse current IR V
R = 200 V 10 μA
Capacitance CT f = 1 MHz, V = 30 V 0.3 pF
Resistance RS f = 100 MHz :
I = 1 mA
I = 10 mA
I = 100 mA
15
20
3
1.5
Ω
Ω
Ω
Forward voltage VF I
F = 10 mA 0.8 V
Carrier lifetime TI IF = 10 mA 0.7 μs
I region width 50 μm
1 Performance is guaranteed only under the conditions listed in this table..
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SMP1302 series is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
DATA SHEET • SMP1302 SERIES PIN DIODES
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4 September 17, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200043AB
Table 5. Resistance vs Temperature @ 100 MHz
IF
(mA)
RS @ -55 °C
(Ω)
RS @ -15 °C
(Ω)
RS @ +25 °C
(Ω)
RS @ +65 °C
(Ω)
RS @ +100 °C
(Ω)
0.02 599 653 692 715 722
0.10 123 135 143 154 161
0.3 42.2 46.6 49.7 54.3 56.8
1.0 13.5 15.0 16.2 17.9 18.8
10 2.0 2.3 2.6 2.9 3.0
20 1.34 1.50 1.70 2.00 2.00
100 0.60 0.74 1.00 1.10 1.10
Typical Performance Characteristics
(TA = +25 C, Unless Otherwise Noted)
0.01 0.1 1 10 100
Forward Current (mA)
Series Resistance (Ω)
0.1
1
10
100
1000
200043-001
Figure 1. Series Resistance vs Current @ 100 MHz
0 1 2 5 10 20 10050
0
0.2
0.4
0.6
0.1
0.3
0.5
0.7
0.8
Reverse Voltage (V)
Capacitance (pF)
100 MHz
1 MHz
1 GHz
200043-003
Figure 3. Capacitance vs Reverse Voltage
400 500 600 700 800 900 1000
0.01
0.1
1
10
100
Forward Voltage (mV)
Forward Current (mA)
200043-002
Figure 2. DC Characteristic
0 500 1000 1500 2000
Frequency (MHz)
Conductance (μS)
0
50
100
150
200
250
300
0 V
10 V
40 V
200043-004
Figure 4. Conductance vs Frequency and Reverse Voltage
VT D::l \/ L f
DATA SHEET • SMP1302 SERIES PIN DIODES
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200043AB • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 17, 2019 5
0.060 (1.50 mm) Min
0.067 (1.70 mm) Max
0.010
(0.25 mm) Min
0.014
(0.35 mm) Max
0.043 (1.10 mm) Min
0.051 (1.30 mm) Max
0.020
(0.50 mm) Min
0.028
(0.70 mm) Max
0.003
(0.07 mm) Min
0.008
(0.20 mm) Max
10° Max
10° Max
0.028
(0.70 mm) Min
0.035
(0.90 mm) Max
0.006 (0.15 mm) Min
Polarity
Indicator Area
12
200043-007
Dimensions are in inches (millimeters shown in parentheses)
Box
or
Bar
Figure 5. SC-79 Package Dimension Drawing
200043-008
Notes:
1. Carrier tape: black conductive polycarbonate or polystyrene.
2. Cover tape material: transparent conductive PSA.
3. Cover tape size: 5.4 mm width.
4. ESD-surface resistivity is ≤1 x 108 Ohms/square per
EIA, JEDEC TNR Specification.
5. All measurements are in millimeters.
8.00 ± 0.20
0.229 ± 0.02 (T)
3.50 ± 0.05
Section A
Section B
Ø1.50± 0.10
Ø0.50± 0.05
4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05
0.80 ± 0.05 (Ko)
1.95 ± 0.05 (Bo)
1.40 ± 0.05
0.39 ± 0.05
0.90 ± 0.05 (Ao)
1.75 ± 0.10
2
o
Max
2° Max
A
B
B
A
Pin 1 Indicator
Figure 6. SC-79 Tape and Reel Dimensions
DATA SHEET • SMP1302 SERIES PIN DIODES
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6 September 17, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200043AB
0.079 (2.00 mm)
± 0.008 (0.20 mm)
0.049 (1.25 mm)
± 0.004 (0.10 mm)
0.008 (0.20 mm)
± 0.004 (0.10 mm)
0.083 (2.10 mm)
± 0.012 (0.30 mm)
0.035 (0.90 mm)
± 0.004 (0.10 mm)
0.002 (0.005 mm)
± 0.002 (0.005 mm) 0.037 (0.95 mm)
± 0.006 (0.15 mm)
0.010 (0.25 mm)
± 0.006 (0.15 mm)
0.0055
(0.14 mm)
± 0.0015
(0.04 mm)
0.0256 (0.65 mm)
BSC
0.009 (0.23 mm)
Ref
200043-009
Dimensions are in inches (millimeters shown in parentheses)
Figure 7. SC-88 Package Dimension Drawing
Notes:
1. Carrier tape: black conductive polystyrene.
2. Cover tape material: transparent conductive HSA.
3. Cover tape size: 5.40 mm width.
4. Ten sprocket hole pitch cumulative tolerance ±0.20 mm.
5. All measurements are in millimeters.
6. Standard reel size is 7 inches. Standard reel quantity is 3000 pcs.
2.25 ± 0.10 (Ao)
0.30 ± 0.05
2.70 ± 0.10 (Bo)
8.00 +0.30/–0.10
4.00 (Note 4)
4.00 ± 0.10
Pin 1
3.50 ± 0.05
2.00 ± 0.05 1.75 ± 0.10
Section A
Section B
1.20 ± 0.10 (Ko)
A
B
B
A
∅1.50+ 0.10/–0.00
∅1.00 Min
R0.30 Typ
200043-010
Figure 8. SC-88 Tape and Reel Dimensions
DATA SHEET • SMP1302 SERIES PIN DIODES
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200043AB • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 17, 2019 7
12
0.090 (2.29 mm) Min
0.107 (2.72 mm) Max 0.000 (0 mm) Min
0.004 (0.10 mm) Max
0.012 (0.305 mm) Min
0.016 (0.406 mm) Max
0.036 (0.91 mm) Min
0.046 (1.17 mm) Max
0.010 (0.25 mm) Min
0.018 (0.46 mm) Max
0.005 (0.127 mm) Min
0.008 (0.203 mm) Max
0.044
(1.12 mm) Min
0.054
(1.37 mm) Max
0.025
(0.635 mm) Min
0.037
(0.940 mm) Max
0.013
(0.33 mm) Min
0.017
(0.43 mm) Max
Cathode
Indicator
0.008 Ref
Gauge Datum
For Foot Length
Measurement
0.060 (1.52 mm) Min
0.070 (1.78 mm) Max
200043-011
Dimensions are in inches (millimeters shown in parentheses)
Figure 9. SOD-323 Package Dimension Drawing
200043-012
Pin 1
Indicator
2.00 ± 0.05
0.30 ± 0.05
4.00
4.00
(See Note 4)
1.52 (Ao)
2.90 (Bo)
1.35 (Ko)
1.07 (K1)
2.08
0.84
R0.5 Typ
R0.3 Max.
Ø1.50 +0.1/–0
Ø1.00 Min
8.00 +0.30/–0.10
3.50 ± 0.05
1.75 ± 0.10
Section A
Notes:
1. Carrier tape: black conductive polystyrene.
2. Cover tape: transparent conductive PSA.
3. Cover tape size: 5.4 mm width.
4. 10 sprocket hole pitch cumulative tolerance: ±0.20 mm.
5. All measurements are in millimeters.
A
A
Figure 10. SOD-323 Tape and Reel Dimensions
DATA SHEET • SMP1302 SERIES PIN DIODES
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
8 September 17, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200043AB
3
2
1
0.035 (0.89 mm) Min
0.044 (1.12 mm) Max
0.0005 (0.01 mm) Min
0.004 (0.10 mm) Max
0.012 (0.30 mm) Min
0.020 (0.50 mm) Max
0.003 (0.080 mm) Min
0.008 (0.20 mm) Max
8° Max
0.022 (0.55 mm) Ref
0.110 (2.80 mm) Min
0.120 (3.04 mm) Max
0.083 (2.10 mm) Min
0.104 (2.64 mm) Max
0.037 (0.95 mm) Ref
0.047 (1.20 mm) Min
0.055 (1.40 mm) Max
0.076 (1.92 mm) Ref
0.020 (0.51 mm) Ref
200043-013
Dimensions are in inches (millimeters shown in parentheses)
Figure 11. SOT-23 Package Dimension Drawing
Notes:
1. Carrier tape: black conductive polycarbonate.
2. Cover tape material: transparent conductive PSA.
3. Cover tape size: 5.40 mm width.
4. Tolerance ±0.10 mm.
5. Ten sprocket hole pitch cumulative tolerance: ±0.2 mm.
6. All measurements are in millimeters.
7. Alternative carrier tape dimensions are:
Ao = 3.3
Bo = 2.9
Ko = 1.22
3.10 (Ao)
1.0
2.2
2.70 (Bo)
8.00 + 0.3/–0.1
4.00
4.00
(See Note 5)
2.00 ± 0.05
3.50 ± 0.05
1.75 ± 0.10
Section A
A
A
0.25 ± 0.05
0.8 ± 0.05
1.20 (Ko)
ø1.00 Min
R 0.5 Typ Pin 1 Indicator
ø1.5 + 0.1/–0
200043-014
R 0.3 Max
Figure 12. SOT-23 Tape and Reel Dimensions
I-Olll E3
DATA SHEET • SMP1302 SERIES PIN DIODES
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200043AB • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 17, 2019 9
Notes:
1. All measurements are in millimeters.
2. Dimensions and tolerances according to ASME Y14.5M-1994.
3. These packages are used principally for discrete devices.
4. This dimension includes stand-off height and package body thickness,
but does not include attached features, e.g., external heatsink or chip capacitors.
An integral heatslug is not considered an attached feature.
5. This dimension is primarily terminal plating, but does not include small metal protrusion.
0.05
2X
0.05
0.46 + 0.04
–0.06
0.05/0.00
Terminal 1
0.03 C
2X 0.25 ± 0.05
2X
Pin 1 Indicator
0.600
A
0.650
C
B
1.000
Seating Plane
4 2X 0.50 ± 0.05
0.10
M
A B
0.10
M
A B
0.325
5
200043-015
Figure 13. SOD-882 Package Dimension Drawing
200043-016
Section A
Section B
2.00 ± 0.05 ∅1.55 ± 0.05 (D0)
∅0.40 ± 0.05 (D1)
Cathode
Indicator
0.20
1.15 ± 0.05 (Bo)
0.70 ± 0.05 (A0)
4.00 ± 0.10
A
BB A
2.00 ± 0.05
0.47 ± 0.05 (Ko)
1.75 ± 0.10
3.50 ± 0.05
8.00 ± 0.1
Notes:
1. Carrier tape: black conductive polycarbonate.
2. Cover tape: transparent conductive material.
3. Cover tape size: 5.4 mm width.
4. ESD surface resistivity is ≥1 x 10
4
~ ≤ 1 x 10
8
Ohms/square.
5. All dimensions are in millimeters.
Figure 14. SOD-882 Tape and Reel Dimensions
DATA SHEET • SMP1302 SERIES PIN DIODES
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
10 September 17, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200043AB
Copyright © 2002-2019 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc. or its subsidiaries in the United States and other countries. Third-party brands and names
are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.