LMV321/358/324 Datasheet by Diodes Incorporated

mules ® W91 uuuu C C C C HHWHW—lfl LILIUIJULILI LMV321/ 358/ 324 10115 Document number 0533195 Rev 772 www.diodss.cum
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
1 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
GENERAL PURPOSE, LOW VOLTAGE,
RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
Description
The LMV321/LMV358/LMV324 are low voltage (2.7V to 5.5V) single,
dual and quad operational amplifiers. The LMV321/LMV358/LMV324
are designed to effectively reduce cost and space at low voltage
levels.
These devices have the capability of rail-to-rail output swing and input
common-mode voltage range includes ground. They can also achieve
an efficient speed-to-power ratio, utilizing 1 MHz bandwidth and
1V/µs slew rate at a low supply current. Reducing noise pickup and
increasing signal integrity can be achieved by placing the device
close to the signal source.
The LMV321 is available in 5-Pin SOT353/SOT25 packages that
reduce space on PC boards and portable electronic devices. The
LMV324 is available in the SO-14 and TSSOP-14 package.
The LMV358 is available in the MSOP-8 and SO-8 packages.
Features
(For V+ = 5V and V- = 0V typical unless otherwise noted)
• Guaranteed 2.7V and 5V Performance
• Crossover Distortion Eliminated
• Operating Temperature Range (-40°C to +125°C)
• Gain-bandwidth Product 1 MHz
• Low Supply Current
- LMV321 110µA Typ
- LMV358 190µA Typ
- LMV324 340µA Typ
• Rail-to-Rail Output Swing @ 10kΩ
- V+ -10 mV
- V- +10 mV
• Input Common Mode Voltage Range (-0.2 to V+ -0.8V)
• Manufactured in Standard CMOS Process
• SOT353, SOT25, MSOP-8, SO-8, SO-14 & TSSOP-14:
Available in “Green” Molding Compound (No Br, Sb)
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
Pin Assignments
1
2
3
5
4
IN+
V-
V+
OUT
+
IN-
-
( Top View )
SOT25 / SOT353
( Top View )
1
2
3
7
6
54
8
SO-8 / MSOP-8
OUTA
INA-
INA+
V-
V+
OUTB
INB-
INB+
B
+ -
A
-+
Applications
• Active Filters
• General Purpose Low Voltage Applications
• General Purpose Portable Devices
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
(Top View)
1
2
3
13
12
11
4
14
SOP-14L / TSSOP-14L
OUT
A
IN
A-
INA
+
V+
OUT
D
IND-
IND+
D
+ -
A
-+
7
6
5
9
10
8
OUT
B
INB-
INB+
V-
OUT
C
INC-
INC+
+ -
C
-+
B
(Top View)
1
2
3
13
12
11
4
14
SOP-14L / TSSOP-14L
OUT
A
IN
A-
INA
+
V+
OUT
D
IND-
IND+
D
+ -
A
-+
7
6
5
9
10
8
OUT
B
INB-
INB+
V-
OUT
C
INC-
INC+
+ -
C
-+
B
LMV321/ 358/ 324 20415 Document number 0533195 Rev 772 www.diodes.cum
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
2 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
Symbol Parameter Rating Unit
ESD HBM Human Body Model ESD Protection
LMV321 4.0
KV LMV358 4.0
LMV324 4.5
ESD MM Machine Model ESD Protection
LMV321 350
V LMV358 350
LMV324 250
Differential Input Voltage ±Supply Voltage V
V+ -V- Supply Voltage 5.5 V
Output Short Circuit to V+ (Note 5)
Output Short Circuit to V- (Note 6)
TST Storage Temperature -65 to +150 °C
TJ Maximum Junction Temperature +150 °C
Notes: 4. Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the
device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the
Electrical Characteristics.
5. Shorting output to V+ will adversely affect reliability.
6. Shorting output to V- will adversely affect reliability.
Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.)
Symbol Parameter Rating Unit
V+ -V- Supply Voltage 2.7 to 5.5 V
TA Operating Ambient Temperature Range -40 to +125 °C
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
2.7V DC Electrical Characteristics
Unless otherwise specified, all limits guaranteed for TA = +25°C, V+ = 2.7V, V- = 0V, VCM = 1.0V, VO = V+/2 and RL > 1 MΩ.
Symbol Parameter Test Conditions
Min
(Note 8)
Typ
(Note 7)
Max
(Note 8) Unit
VOS Input Offset Voltage 1.7 7 mV
TCVOS Input Offset Voltage Average Drift 5 µV/°C
IB Input Bias Current 10 nA
IOS Input Offset Current 5 50 nA
CMRR Common Mode Rejection Ratio 0V ≤ VCM ≤ 1.7V 50 63 dB
PSRR Power Supply Rejection Ratio 2.7V ≤ V+ ≤ 5V, VO = 1V 50 60 dB
VCMR Input Common-Mode Voltage Range For CMRR ≥ 50dB 0 -0.2 V
1.9 1.7
VO Output Swing RL = 10 kΩ to 1.35V V+ - 100 V+ - 20 mV
20 100
IS Supply Current
LMV321 Single amplifier 110 140 µA
LMV358 Both amplifiers 190 340 µA
LMV324 All four amplifiers 340 680 µA
2.7V AC Electrical Characteristics
Unless otherwise specified, all limits guaranteed for TA = +25°C, V+ = 2.7V, V- = 0V, VCM = 1.0V, VO = V+/2 and RL > 1 MΩ.
GBWP Gain-Bandwidth Product CL = 200 pF 1 MHz
Φm Phase Margin 60 Deg
Gm Gain Margin 10 dB
en Input-Referred Voltage Noise f > 50 kHz 23
Z
H
nV
LMV321/ 358/ 324 3 0'15 Document number 0533195 Rev 772 www.aioaes.cum
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
3 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
Electrical Characteristics (cont.) (@TA = +25°C, unless otherwise specified.)
5V DC Electrical Characteristics
Unless otherwise specified, all limits guaranteed for TA = +25°C, V+ = 5V, V- = 0V, VCM = 2.0V, VO = V+/2 and RL > 1 MΩ.
Symbol Parameter Test Conditions
Min
(Note 8)
Typ
(Note 7)
Max
(Note 8) Unit
VOS Input Offset Voltage TA = +25°C 1.7 7
mV
TA = full range 9
TCVOS Input Offset Voltage Average Drift 5 µV/°C
IB Input Bias Current TA = +25°C 15 250
nA
TA = full range 500
IOS Input Offset Current TA = +25°C 5 50
nA
TA = full range 150
CMRR Common Mode Rejection Ratio 0V ≤ VCM ≤ 4.0V 50 65 dB
PSRR Power Supply Rejection Ratio 2.7V ≤ V+ ≤ 5V
VO = 1V, VCM = 1V 50 60 dB
VCMR Input Common-Mode Voltage Range For CMRR ≥ 50dB 0 -0.2 V
4.2 4.0
AV Large Signal Voltage Gain RL = 2 kΩ (Note 9) TA = +25°C 15 100
V/mV
TA = full range 10
VO Output Swing
RL = 2 kΩ to 2.5V
High level TA = +25°C V+ - 300 V+ -50
mV
TA = full range V+ - 400
Low level TA = +25°C 50 300
TA = full range 400
RL = 10 kΩ to 2.5V
High level TA = +25°C V+ - 100 V+ -10
TA = full range V+ - 200
Low level TA = +25°C 10 180
TA = full range 280
IO Output Short Circuit Current Sourcing, VO = 0V 5 60
mA
Sinking, VO = 5V 10 90
IS Supply Current
LMV321 Single amplifier 110 140
µA
LMV358 Both amplifiers TA = +25°C 190 340
TA = full range 600
LMV324 All four amplifiers TA = +25°C 340 680
TA = full range 1100
θJA Thermal Resistance Junction-to-
Ambient
SOT353 (Note 10) 330
°C/W
SOT25 (Note 10) 250
TSSOP-14 (Note 10) 100
MSOP-8 (Note 10) 203
SO-8 (Note 10) 150
SO-14 (Note 10) 83
5V AC Electrical Characteristics
Unless otherwise specified, all limits guaranteed for TA = 25°C, V+ = 5V, V- = 0V, VCM = 2.0V, VO = V+/2 and RL > 1 MΩ.
Boldface limits apply at the temperature extremes.
SR Slew Rate (Note 11) 1 V/µs
GBWP Gain-Bandwidth Product CL = 200pF 1 MHz
Φm Phase Margin 60 Deg
Gm Gain Margin 10 dB
en Input-Referred Voltage Noise f > 50 kHz 23
Z
H
nV
Notes: 7. Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time
and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material.
8. All limits are guaranteed by testing or statistical analysis.
9. RL is connected to V-. The output voltage is 0.5V ≤ VO ≤ 4.5V.
10. All numbers are typical, and apply for packages soldered directly onto a PC board in still air.
11. Connected as voltage follower with 3V step input. Number specified is the slower of the positive and negative slew rates.
yC LMV321/ 358/ 324 40415 Document number 0533195 Rev 772 www.diodes.cum
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
4 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
Typical Performance Characteristics (VS = +5V, single supply, @TA = +25°C, unless otherwise specified.)
Supply Current vs. Supply Voltage
2.5 3.0 3.5 4.0 4.5 5.0
3.0
3.5
4.0
4.5
5.0
5.5
6.0
Output Voltage from Power Supply (mV)
RL=10Kohm
Supply Voltage (V)
Positive Swing
Negative Swing
Output Voltage Swing vs. Supply Voltage
100 1k 10k 100k 1M
0
10
20
30
40
50
60
70
80
PSRR (dB)
Frequency (Hz)
Vs = 5V
RL = 10Kohm
PSRR vs. Frequency
100 1k 10k 100k 1M
30
40
50
60
70
80
90
100
CMRR (dB)
Frequency (Hz)
Vs = 5V
VIN = Vs / 2
RL = 5Kohm
CMRR vs. Frequency
CMRR vs. Input Common Mode Voltage
∆Vos vs. CMR
0.0
0.2
0.4
0.8
0.10
0.12
0.14
0.16
0.18
0.24
0.22
0.20
0.6
120354
Supply Voltage (V)
Supply
C
urrent (mA)
30
40
50
60
70
80
90
-0.2 0.2 0.6 1 1.4 1.8 2.2 2.6 3 3.4 3.8 4.2 4.6 5
Common-mode input voltage (V)
Common-mode rejection ratio (dB)
2.7V supply
5V supply
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
-0.2 0.2 0.6 1 1.4 1.8 2.2 2.6 3 3.4 3.8 4.2 4.6 5
Common-mode input voltage (V)
Input offset voltage (mV)
LMV321/ 358/ 324 Sol 15 Document number 0533195 Rev 772 www.diodss.cum
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
5 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
Typical Performance Characteristics (cont.)
1E-3 0.01 0.1 1 10
1E-3
0.01
0.1
1
10
100
sourcing current-mA
Output voltage referenced to Vcc-V
VCC=2.7V
Sourcing Current vs. Output Voltage (2.7V)
1E-3 0.01 0.1 1 10
1E-3
0.01
0.1
1
10
100
sourcing current-mA
Output voltage referenced to Vcc-V
Vcc=5V
Sourcing Current vs. Output Voltage (5V)
1E-3 0.01 0.1 1 10
1E-3
0.01
0.1
1
10
100
sinking current-mA
Out
p
ut volta
g
e referenced to GND-V
Vcc=2.7V
Sinking Current vs. Output Voltage (2.7V)
1E-3 0.01 0.1 1 10
1E-3
0.01
0.1
1
10
100
sinking current-mA
Output voltage referenced to GND-V
Vcc=5V
Sinking Current vs. Output Voltage (5V)
0 50 100 150 200 250 300
0.0
0.5
1.0
1.5
2.0
Vs=+/- 2V
RL=600ohm
RL=10kohm
RL=2k ohm
output voltage(V)
Input voltage(uV)
Input Voltage vs. Output Voltage
Output Voltage vs. Input Voltage
-600
-400
-200
0
200
400
600
-2.5 -2 -1.5 -1 -0.5 0 0.5 1 1.5 2 2.5
Input voltage (µV)
Output voltage (V)
R
L
= 600 ohm
R
L
= 10 kohm
R
L
= 2 kohm
m mmBma LMV321/ 358/ 324 Document number. 0533196 Rev. 7 , 2 6 0'15 www.diodes.com
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
6 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
Typical Performance Characteristics (cont.)
Frequency Response vs. Resistive Load (2.7V)
Frequency Response vs. Resistive Load (5V)
Frequency Response vs. Capacitive Load (2.7V)
Frequency Response vs. Capacitive Load (5V)
Crosstalk vs. Frequency
60
70
80
90
100
110
120
130
0.1 1 10 100
Frequency (kHz)
Crosstalk (dB)
T=75C,RIFZ! v P w has/DIV 1|ISID|V Tami; RIFZKahm FIST; RIFZKuhm ..... 5' I at a Inn-1| "p Q 2 Output E cup": 9 s 2 ~/ 7 1 115ti 1fl5/DiV T=85t mixer-n T=-40t, RIFZKUhm E! 2 Input 9 a > ompm ~ E _ M E S o \ ‘2 n :1 1|.IsIDIv 1 usIDIv LMV321/ 358/ 324 70(15 www.diodss.com Document numben 0533196 Rev. 7 , 2
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
7 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
Typical Performance Characteristics (cont.)
Inverting Large Signal Pulse Response
Inverting Large Signal Pulse Response
Inverting Large Signal Pulse Response
Inverting Small Signal Pulse Response
Inverting Small Signal Pulse Response
Inverting Small Signal Pulse Response
A 10m 0 :3’ g wwrzsv g AWH g ‘m RL:1M0hm VuumuumVpp 10 20 4s. 40 05 00 05 m 15 Outpmwnagem 10,000 E 5 1000 'u E .3 g v5:./zsv g Awnu W R =1M0hm ° 10° vfiufimumvw : 1D 72.0 ,15 ,10 70.5 0.0 05 10 1.5 20 Output Vunage (v) H , n Inn-(n..\ m hmgng H as :5 an as 40 u sn LMV321/ 358/ 324 Document numben 0533195 Rev. 7 , 2 Immn Q 1000 3 g Vk’kZEN 3 ma A 1 3 R knhm V0uh1flflmlpp m an 45 4n 705 on 05 w ‘5 OmpulVUItagEM 10,000 a 51000 1:! § 0: 2 S m 0 100 10 -2.0 -1.5 -1.0 -u.5 0,0 0,5 10 15 2.0 Output manage (V) W www.diodes.com
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
8 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
Typical Performance Characteristics (cont.)
Stability vs. Capacitive Load Stability vs. Capacitive Load
Stability vs. Capacitive Load
Stability vs. Capacitive Load
Supply Voltage (V)
Slew Rate (V/us)
Slew Rate vs. Supply Voltage
Input Voltage Noise
0
10
20
30
40
50
60
70
80
90
100
1000 10000 100000 1000000
Frequency (Hz)
Z
H
nV
LMV3XX (25% overshoot)
LMV3XX (25% overshoot)
LMV3XX (25% overshoot) LMV3XX (25% overshoot)
134 KΩ 1.21 MΩ 134 KΩ 1.21 MΩ
Part Number I I Package I I Green I I Packing W H fl i HIE)! w L I_I I_I |_| LMV321/ 358/ 324 9 0'15 Document number 0533195 Rev 772 www.diodss.cum
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
9 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
Ordering Information
Part Number Package Code Packaging 7”/13” Tape and Reel
Quantity Part Number Suffix
LMV321WG-7 W SOT25 3000/Tape & Reel -7
LMV321SEG-7 SE SOT353 3000/Tape & Reel -7
LMV324BG-13 B SO-14 2500/Tape & Reel -13
LMV324TSG-13 TS TSSOP-14 2500/Tape & Reel -13
LMV358SG-13 S SO-8 2500/Tape & Reel -13
LMV358M8G-13 M8 MSOP-8 2500/Tape & Reel -13
Notes: 12. LMV321 is only available for SOT25 and SOT353.
13. LMV324 is only available for SO-14 and TSSOP-14.
14. LMV358 is only available for SO-8 and MSOP-8.
Marking Information
SOT25/SOT353
1 2 3
5
7
4
XX YW X
XX : Identification Code
W : Week : A~Z : 1~26 week;
X : A~Z : Green
(Top View)
Y : Year : 0~9
a~z : 27~52 week;
z represents 52 and 53 week
Part Number Package
24 : Quad
Packing
Green
G : Green
58 : Dual
7/13 : Tape & Reel
21 : Single
Part Number Package
24 : Quad
Packing
Green
G : Green
58 : Dual
7/13 : Tape & Reel
21 : Single
(Note 12)
(Note 13)
(Note 14)
W : SOT25
SE : SOT353
B : SO-14
TS : TSSOP-14
S : SO-8
M8 : MSOP-8
LMV3 -
X
XXXG X
Device Package type Identification Code
LMV321W SOT25 BX
LMV321SE SOT353 BY
H H H H <——3:: r—=""> 4—— fl flMXl M . E U U U U H H H H Y ‘—-D:l in Q ‘7 5 U U U U LMV321/ 358/ 324 10 0'15 Document number 0533195 Rev 772 www.diodes.cum
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
10 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
Marking Information (cont.)
SO-14 / TSSOP-14
( Top View )
1
LMV324
YY WW X X
Logo
14
Part Number
8
7
G : Green
WW : Week : 01~52; 52
YY : Year : 08, 09,10~
X : Internal Code
represents 52 and 53 week
SO-8
LMV358
(Top view)
YY WW X X
Part Number
Logo G : Green
8765
1234
WW : Week : 01~52; 52
YY : Year : 08, 09,10~
X : Internal Code
represents 52 and 53 week
MSOP-8
LMV358
( Top view )
Y W X
Part Number
Logo
Y : Year : 0~9
X : A~Z : Green
87 65
1234
W : Week : A~Z :1~26 week;
a~z : 27~52 week;
z represents 52 and 53 week
HRH—— El Eli, *IF-ii HEIEI T El a; THH {[1:3an f ““ HHHHHHHi HHHHHHlfli if A\L L4; LMV321/ 358/ 324 11 of 15 Document number 0533195 Rev 772 www.diodes.cum
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
11 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
Package Outline Dimensions (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
SOT25
SOT353
SO-14
SOT25
Dim Min Max Typ
A 0.35 0.50 0.38
B 1.50 1.70 1.60
C 2.70 3.00 2.80
D ⎯ ⎯ 0.95
H 2.90 3.10 3.00
J 0.013 0.10 0.05
K 1.00 1.30 1.10
L 0.35 0.55 0.40
M 0.10 0.20 0.15
N 0.70 0.80 0.75
α 0° 8°
⎯
All Dimensions in mm
SOT353
Dim Min Max Typ
A 0.10 0.30 0.25
B 1.15 1.35 1.30
C 2.00 2.20 2.10
D 0.65 Typ
F 0.40 0.45 0.425
H 1.80 2.20 2.15
J 0 0.10 0.05
K 0.90 1.00 1.00
L 0.25 0.40 0.30
M 0.10 0.22 0.11
α 0° 8° -
All Dimensions in mm
SO-14
Dim Min Max
A 1.47 1.73
A1 0.10 0.25
A2 1.45 Typ
B 0.33 0.51
D 8.53 8.74
E 3.80 3.99
e 1.27 Typ
H 5.80 6.20
L 0.38 1.27
θ 0° 8°
All Dimensions in mm
A
M
JL
D
B C
H
KN
A
M
JL
D
B C
H
K
F
EH
A
A2
e
D
A1
L
Gauge Plane
Detail “A”
Detail “A”
7°(4x)
θ
B
3454 Damn ‘A J 6 \ Am “J LMV321/ 358/ 324 Document number 0533195 Rev 772 12 of 15 www.diodes.cum
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
12 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
Package Outline Dimensions (cont.) (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
TSSOP-14
SO-8
MSOP-8
TSSOP-14
Dim Min Max
a1 7° (4X)
a2 0° 8°
A 4.9 5.10
B 4.30 4.50
C ⎯ 1.2
D 0.8 1.05
F 1.00 Typ
F1 0.45 0.75
G 0.65 Typ
K 0.19 0.30
L 6.40 Typ
All Dimensions in mm
SO-8
Dim Min Max
A - 1.75
A1 0.10 0.20
A2 1.30 1.50
A3 0.15 0.25
b 0.3 0.5
D 4.85 4.95
E 5.90 6.10
E1 3.85 3.95
e 1.27 Typ
h - 0.35
L 0.62 0.82
θ 0° 8°
All Dimensions in mm
MSOP-8
Dim Min Max Typ
A - 1.10 -
A1 0.05 0.15 0.10
A2 0.75 0.95 0.86
A3 0.29 0.49 0.39
b 0.22 0.38 0.30
c 0.08 0.23 0.15
D 2.90 3.10 3.00
E 4.70 5.10 4.90
E1 2.90 3.10 3.00
E3 2.85 3.05 2.95
e - - 0.65
L 0.40 0.80 0.60
a 0° 8° 4°
x - - 0.750
y - - 0.750
All Dimensions in mm
Gauge Plane
Seating Plane
Detail ‘A’
Detail ‘A’
E
E1
h
L
D
eb
A2
A1
A
45
°
7
°~
9
°
A3
0.254
G
L
A
K
a1
D
C
a2
F
F1
Pin# 1 Indent
Detail ‘A’
Detail ‘A’
0
.
25
Gauge Plane
Seating Plane
B
A
A1
A2
e
Seating Plane
Gauge Plane
L
See Detail C
Detail C
c
a
E1
E3
A3
1
E
y
x
D
b
0.25
4x10°
4x10°
FA ~|<——% |‘——’|="" t="" 4—+="" inl="" %%="" iebieeet="" +="" h="" l="" iibbeieer="" +%="" behiiiet="" +="" h="" l="" ibbbiibe="" lmv321/="" 358/="" 324="" 13="" of="" 15="" document="" number="" 0533195="" rev="" 772="" www.diodes.cum="">
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
13 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
SOT25
SOT353
SO-14
TSSOP-14
Dimensions Value (in mm)
Z 3.20
G 1.60
X 0.55
Y 0.80
C1 2.40
C2 0.95
Dimensions Value (in mm)
Z 2.5
G 1.3
X 0.42
Y 0.6
C1 1.9
C2 0.65
Dimensions Value (in mm)
X 0.60
Y 1.50
C1 5.4
C2 1.27
Dimensions Value (in mm)
X 0.45
Y 1.45
C1 5.9
C2 0.65
X
Z
Y
C1
C2C2
G
X
Z
Y
C1
C2C2
G
X
C1
C2
Y
X
C1
C2
Y
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
14 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
Suggested Pad Layout (cont.)
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
SO-8
MSOP-8
Dimensions Value (in mm)
X 0.60
Y 1.55
C1 5.4
C2 1.27
Dimensions Value (in mm)
C 0.650
X 0.450
Y 1.350
Y1 5.300
X
C1
C2
Y
X C
Y
Y1
LMV321/ 358/ 324 15 0'15 Document number 0533195 Rev 772 www.diodes.cum
LMV321/ 358/ 324
Document number: DS33196 Rev. 7 - 2
15 of 15
www.diodes.com
January 2013
© Diodes Incorporated
LMV321/ 324/ 358
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2013, Diodes Incorporated
www.diodes.com