GT Tough Series Datasheet by Panasonic Industrial Automation Sales

NEW Programmable Display @m cm» ‘C6
panasonic.net/id/pidsx/global
2013.10 panasonic.net/id/pidsx/global
2013.10
Excellent Visibility and
Environmental Resistance
High visibility display even in bright environments, it’s also compact.
Introducing a new product line in the Tough Series with excellent environmental resistance
Programmable Display
GT SERIES
GT SERIES
Conforming to EMC Directive
Listing
Charging possmle D Coon-cl me chaps wnnoctov YD ms ca- and then pass m 'SYARY“ mum START H
Applications
(-20 to +55 ºC -4 to +131 ºF when horizontally installed, vertically
installed in a portrait orientation and when using battery)
The wide operating temperature range allows for use
in various environments. High in brightness and contrast and anti-glare coating
provides exceptional viewing characteristics.
Monochrome type uses a TFT LCD that’s bright and uses
deep black for great visibility.
High visibility display even in bright environments!
Improved
visibility
Screen data of GT32-E can be used on the smaller display.
Same resolution [320 (W) × 240 (H) dots] as
the 5.7 inch model (GT32-E)
The two-layer front protection sheet deduces UV rays in two-stage.
Resistant to UV Rays!
UV
Reduction
High-
definition
IP67
The front panel has a protective structure rated IP67.
High waterproof performance allows for use in
environments exposed to splashing water. *Based on research conducted by our company as of
June, 2013
The industry's smallest class* body among
3.5 inch screen
Industry's
smallest
Color type (GT03T-E): 3.1 W or less
Monochrome type (GT03M-E): 1.9 W or less
Low power
consumption
GT32T-E (Actual size)
New Models Added to the GT Series
GT03-E Compact Models Debut!
See page 4 for details.
Charging station for Electric Vehicle (EV) Car washing machine Coin-operated parking Food filling machine
• The LCD picture on this page is simulated images.
Common Features for Tough Series
5.7 inch
GT03T-E (Actual size)
3.5 inch
–20 to
+60°C
–4 to
+140°F
Superior visibility even in sunlight
Color type Monochrome type
Tough series GT32T-E Tough series GT32M-EConventional model GT32T Conventional model GT32M
● High contrast TFT LCD: Achieved higher contrast and visibility.
● High brightness backlight: Achieved greater brightness and visibility than the conventional model.
The monochrome type, in particular, is greater brightness than the conventional model and is way easier to view
in bright environments thanks to the “deep black”.
Comparison of reflection
Anti-glare front coating Tough series GT32T-E
No anti-glare front coating Conventional model GT32T
Anti-glare, High visibility display
● A front protection layer has an anti-glare coating to prevent unwanted reflections
(Fingerprints are made less noticeable even in outdoor use)
Anti-glare front coating
Touch panel
LCD panel
Incident light
Reflected
light
Front layer
Incident lightReflected
light
Touch panel
LCD panel
No risk of product deterioration due to
UV exposure
■ UV ray transmittance performance
0
10
20
30
40
50
60
70
80
90
100
0.008 0.010 0.012 0.014 0.016 0.018 0.020 0.022 0.024 0.026 0.028 0.030 0.031 0.033
200 250 300 350 400 450 500 550 600 650 700 750 800 850
Transmittance (%)
Wavelength (nm mil)
UV rays
GT32
Conventional
model Tough series
Higher environmental
resistance model
Two-stage UV blocking is achieved
through the combination of UV
cutting and absorbing layers.
Transmittance of UV rays
(380 nm 0.015 mil or less): 3 % or less
Hard coating (UV cutting layer)
Base (UV absorbing layer)
● The front sheet is made of a material that does not
transmit UV rays.
● A combination of a UV cutting layer and a UV
absorbing layer performs two-stage UV blocking.
The LCD and touch panel can be protected from deterioration.
Excellent water resistance
●
The front panel has a protective structure rated IP67.
Safe to use outdoors or in a location exposed to splashing water.
● Added protection has been applied to the rear of
the unit for a more rugged overall construction.
Wide operating temperature range
● Usable in a range of -20 to +60 °C -4 to +140 °F
(-20 to +55 °C -4 to +131 °F when horizontally installed, vertically
installed in a portrait orientation and when using battery)
● The TFT LCD can quickly switch screens even at a
low temperature.
● The life of the LED backlight does not decrease
even at a low power consumption.
● It is not necessary to prepare a heater for use at a
low temperature.
Reduced power consumption
● Compact color type (GT03T-E): 3.1 W or less
● Compact monochrome type (GT03M-E): 1.9 W or less
● Color type (GT32T-E): 7.2 W or less
● Monochrome type (GT32M-E): 4.8 W or less
( )
( )
02
03
Tou 0,004,“. . D '> . a“. Churr mm Lung" Incide d Incidenl From nnl n nu
Applications
(-20 to +55 ºC -4 to +131 ºF when horizontally installed, vertically
installed in a portrait orientation and when using battery)
The wide operating temperature range allows for use
in various environments. High in brightness and contrast and anti-glare coating
provides exceptional viewing characteristics.
Monochrome type uses a TFT LCD that’s bright and uses
deep black for great visibility.
High visibility display even in bright environments!
Improved
visibility
Screen data of GT32-E can be used on the smaller display.
Same resolution [320 (W) × 240 (H) dots] as
the 5.7 inch model (GT32-E)
The two-layer front protection sheet deduces UV rays in two-stage.
Resistant to UV Rays!
UV
Reduction
High-
definition
IP67
The front panel has a protective structure rated IP67.
High waterproof performance allows for use in
environments exposed to splashing water. *Based on research conducted by our company as of
June, 2013
The industry's smallest class* body among
3.5 inch screen
Industry's
smallest
Color type (GT03T-E): 3.1 W or less
Monochrome type (GT03M-E): 1.9 W or less
Low power
consumption
GT32T-E (Actual size)
New Models Added to the GT Series
GT03-E Compact Models Debut!
See page 4 for details.
Charging station for Electric Vehicle (EV) Car washing machine Coin-operated parking Food filling machine
• The LCD picture on this page is simulated images.
Common Features for Tough Series
5.7 inch
GT03T-E (Actual size)
3.5 inch
–20 to
+60°C
–4 to
+140°F
Superior visibility even in sunlight
Color type Monochrome type
Tough series GT32T-E Tough series GT32M-EConventional model GT32T Conventional model GT32M
● High contrast TFT LCD: Achieved higher contrast and visibility.
● High brightness backlight: Achieved greater brightness and visibility than the conventional model.
The monochrome type, in particular, is greater brightness than the conventional model and is way easier to view
in bright environments thanks to the “deep black”.
Comparison of reflection
Anti-glare front coating Tough series GT32T-E
No anti-glare front coating Conventional model GT32T
Anti-glare, High visibility display
● A front protection layer has an anti-glare coating to prevent unwanted reflections
(Fingerprints are made less noticeable even in outdoor use)
Anti-glare front coating
Touch panel
LCD panel
Incident light
Reflected
light
Front layer
Incident lightReflected
light
Touch panel
LCD panel
No risk of product deterioration due to
UV exposure
■ UV ray transmittance performance
0
10
20
30
40
50
60
70
80
90
100
0.008 0.010 0.012 0.014 0.016 0.018 0.020 0.022 0.024 0.026 0.028 0.030 0.031 0.033
200 250 300 350 400 450 500 550 600 650 700 750 800 850
Transmittance (%)
Wavelength (nm mil)
UV rays
GT32
Conventional
model Tough series
Higher environmental
resistance model
Two-stage UV blocking is achieved
through the combination of UV
cutting and absorbing layers.
Transmittance of UV rays
(380 nm 0.015 mil or less): 3 % or less
Hard coating (UV cutting layer)
Base (UV absorbing layer)
● The front sheet is made of a material that does not
transmit UV rays.
● A combination of a UV cutting layer and a UV
absorbing layer performs two-stage UV blocking.
The LCD and touch panel can be protected from deterioration.
Excellent water resistance
●
The front panel has a protective structure rated IP67.
Safe to use outdoors or in a location exposed to splashing water.
● Added protection has been applied to the rear of
the unit for a more rugged overall construction.
Wide operating temperature range
● Usable in a range of -20 to +60 °C -4 to +140 °F
(-20 to +55 °C -4 to +131 °F when horizontally installed, vertically
installed in a portrait orientation and when using battery)
● The TFT LCD can quickly switch screens even at a
low temperature.
● The life of the LED backlight does not decrease
even at a low power consumption.
● It is not necessary to prepare a heater for use at a
low temperature.
Reduced power consumption
● Compact color type (GT03T-E): 3.1 W or less
● Compact monochrome type (GT03M-E): 1.9 W or less
● Color type (GT32T-E): 7.2 W or less
● Monochrome type (GT32M-E): 4.8 W or less
( )
( )
02
03
‘TO3T7E In DIIIIIDDEIII
USB
mini
3.5 inch, 4,096 colors TFT color LCD equipped with long life
LED backlight
Built-in SD / SDHC memory card slot *2
SilverSilver
*1: Based on research conducted by our company as of June, 2013
*2: Class 10 compatible with a card of up to 32 GB.
Easy to copy, back up, and restore screen data.
Through use of a TFT LCD with contrast ratio of 1,000 : 1, the “deep black” on a bright
display means incredible visibility even in bright environments.
Programmable Display
The industry’s smallest calss*1 body among 3.5 inch screen
Color display uses 3.1 W or less for low power consumption!
Use of 3.5 inch TFT monochrome LCD is an industry first*1!
Tough series
GT03T-E
GT03M-E
GT03T-E
3.5 inch, 16-gray scale TFT monochrome LCD equipped
with long life LED backlight
GT03M-E
● GT03T-E
1.102 in0.236 in
GT03M-E
FP series PLC connection cable AIGT8162
mini USB port
Connector for communication
and power supply
To PC
To PLC
Operation mode switch
SD
memory
card slot
GT03T-E
1.181 in0.157 in
28 mm6.0 mm
30 mm4.0 mm
FP series PLC connection cable AIGT8162
mini USB port
Connector for communication
and power supply
To PC
To PLC
Battery holder and
operation mode switch
SilverSilver
*1: Class 10 compatible with a card of up to 32 GB.
USB
24V
DC
Programmable Display
Outdoor Use Made Possible by Significantly Improved
Environmental Resistance and Visibility
SD
HC
Tough series
IP67
GT32T-E
GT32M-E
Battery holder and
operation mode switch
3.5 inch
86 mm
3.386 in
98 mm
3.858 in
TFT
monochrome
(black/white)
32 chars.
× 24 lines
(10-dot font)
320
× 240
dots
3.5
inch
White
LED
TFT
4,096
colors
● GT03M-E ● GT03T-E
SD
HC
24V
DC
IP67
Portrait
5.7 inch
128.8
mm
5.071
in
163.2 mm
6.425 in
Wide range of operating temperature that covers
outdoor use
The improved environmental resistance allows for use in a wider
operating temperature range of -20 to +60 °C -4 to +140 °F.
Superior visibility even in sunlight
The brightness, contrast ratio, and viewing angle have been improved.
5.7 inch, 4,096 colors TFT color LCD equipped with long life LED backlight
UV Resistant, Anti-glare front panel
A front protection layer reduces the intensity of UV rays and has an anti-glare coating.
Impressive water resistance makes usage possible in
areas prone to water contact.
The front panel is IP67 rated with added protection applied to the rear of the unit for
a more rugged overall construction.
Built-in SD / SDHC memory card slot *1
Easy to copy, back up, and restore screen data.
Transformer-isolated power supply
The isolated power supply enhances the reliability.
Integrated USB Interface
You can connect your PC and GT32-E using your USB cable to transfer screen data.
When used with our FP series PLC, this display supports the pass through function, which allows simultaneous debugging of the PLC and the display
GT32T-E
5.7 inch, 16-gray scale TFT monochrome LCD equipped with long life LED backlight
Common features
GT32M-E
SD
memory
card slot
1.539 in 0.059 in
39.1 mm 1.5 mm
Connector for communication
and power supply
To PLC
FP series PLC connection cable AIGT8162
USB port
To PC
TFT
monochrome
(black/white)
32 chars.
× 24 lines
(10-dot font)
320
× 240
dots
5.7
inch
White
LED
TFT
4,096
colors
● GT32M-E ● GT32T-E
Portrait
Great visibility even in bright environments is possible thanks to use of a TFT LCD with contrast ratio of 500 : 1.
Through use of a TFT LCD with contrast ratio of 400 : 1, the “deep black” on a bright display means incredible visibility even in bright environments.
04
05
Wide range of operating temperature that covers
outdoor use
The improved environmental resistance allows for use in a wider
operating temperature range of -20 to +60 °C -4 to +140 °F.
Superior visibility even in sunlight
The brightness and contrast ratio have been improved.
UV resistant, anti-glare front panel
A front protection layer reduces the intensity of UV rays and has an anti-glare coating.
Impressive water resistance makes usage possible in
areas prone to water contact.
The front panel is IP67 rated with added protection applied to the rear of the unit for a
more rugged overall construction.
Common features
Integrated USB Interface
You can connect your PC and GT03-E using your USB cable to transfer screen data.
When used with our FP series PLC, this display supports the pass through function,
which allows simultaneous debugging of the PLC and the display
C E @us I$ Programmable Dlsplay LILLLLLEELLL
USB
mini
3.5 inch, 4,096 colors TFT color LCD equipped with long life
LED backlight
Built-in SD / SDHC memory card slot *2
SilverSilver
*1: Based on research conducted by our company as of June, 2013
*2: Class 10 compatible with a card of up to 32 GB.
Easy to copy, back up, and restore screen data.
Through use of a TFT LCD with contrast ratio of 1,000 : 1, the “deep black” on a bright
display means incredible visibility even in bright environments.
Programmable Display
The industry’s smallest calss*1 body among 3.5 inch screen
Color display uses 3.1 W or less for low power consumption!
Use of 3.5 inch TFT monochrome LCD is an industry first*1!
Tough series
GT03T-E
GT03M-E
GT03T-E
3.5 inch, 16-gray scale TFT monochrome LCD equipped
with long life LED backlight
GT03M-E
● GT03T-E
1.102 in0.236 in
GT03M-E
FP series PLC connection cable AIGT8162
mini USB port
Connector for communication
and power supply
To PC
To PLC
Operation mode switch
SD
memory
card slot
GT03T-E
1.181 in0.157 in
28 mm6.0 mm
30 mm4.0 mm
FP series PLC connection cable AIGT8162
mini USB port
Connector for communication
and power supply
To PC
To PLC
Battery holder and
operation mode switch
SilverSilver
*1: Class 10 compatible with a card of up to 32 GB.
USB
24V
DC
Programmable Display
Outdoor Use Made Possible by Significantly Improved
Environmental Resistance and Visibility
SD
HC
Tough series
IP67
GT32T-E
GT32M-E
Battery holder and
operation mode switch
3.5 inch
86 mm
3.386 in
98 mm
3.858 in
TFT
monochrome
(black/white)
32 chars.
× 24 lines
(10-dot font)
320
× 240
dots
3.5
inch
White
LED
TFT
4,096
colors
● GT03M-E ● GT03T-E
SD
HC
24V
DC
IP67
Portrait
5.7 inch
128.8
mm
5.071
in
163.2 mm
6.425 in
Wide range of operating temperature that covers
outdoor use
The improved environmental resistance allows for use in a wider
operating temperature range of -20 to +60 °C -4 to +140 °F.
Superior visibility even in sunlight
The brightness, contrast ratio, and viewing angle have been improved.
5.7 inch, 4,096 colors TFT color LCD equipped with long life LED backlight
UV Resistant, Anti-glare front panel
A front protection layer reduces the intensity of UV rays and has an anti-glare coating.
Impressive water resistance makes usage possible in
areas prone to water contact.
The front panel is IP67 rated with added protection applied to the rear of the unit for
a more rugged overall construction.
Built-in SD / SDHC memory card slot *1
Easy to copy, back up, and restore screen data.
Transformer-isolated power supply
The isolated power supply enhances the reliability.
Integrated USB Interface
You can connect your PC and GT32-E using your USB cable to transfer screen data.
When used with our FP series PLC, this display supports the pass through function, which allows simultaneous debugging of the PLC and the display
GT32T-E
5.7 inch, 16-gray scale TFT monochrome LCD equipped with long life LED backlight
Common features
GT32M-E
SD
memory
card slot
1.539 in 0.059 in
39.1 mm 1.5 mm
Connector for communication
and power supply
To PLC
FP series PLC connection cable AIGT8162
USB port
To PC
TFT
monochrome
(black/white)
32 chars.
× 24 lines
(10-dot font)
320
× 240
dots
5.7
inch
White
LED
TFT
4,096
colors
● GT32M-E ● GT32T-E
Portrait
Great visibility even in bright environments is possible thanks to use of a TFT LCD with contrast ratio of 500 : 1.
Through use of a TFT LCD with contrast ratio of 400 : 1, the “deep black” on a bright display means incredible visibility even in bright environments.
04
05
Wide range of operating temperature that covers
outdoor use
The improved environmental resistance allows for use in a wider
operating temperature range of -20 to +60 °C -4 to +140 °F.
Superior visibility even in sunlight
The brightness and contrast ratio have been improved.
UV resistant, anti-glare front panel
A front protection layer reduces the intensity of UV rays and has an anti-glare coating.
Impressive water resistance makes usage possible in
areas prone to water contact.
The front panel is IP67 rated with added protection applied to the rear of the unit for a
more rugged overall construction.
Common features
Integrated USB Interface
You can connect your PC and GT03-E using your USB cable to transfer screen data.
When used with our FP series PLC, this display supports the pass through function,
which allows simultaneous debugging of the PLC and the display
Jr /\ ' )SH‘HIHMH
PLC built-in
memory
Product A
A
DT10
DT20
DT21
DT22
B
10
20
40
50
1
2
3
4
5
6
7
8
9
SD / SDHC
memory card
Product A Product B
A
DT10
DT20
DT21
DT22
B
10
20
40
50
1
2
3
4
5
6
7
8
9
A
DT10
DT20
DT21
DT22
B
20
50
70
90
1
2
3
4
5
6
7
8
9
SD SolutionsSD Solutions Touch panel
PLC (FP7)
PLC
Eco-POWER METER
Data Logger
Image Processing Device
CT
CT
CT
Log and other data saved on a SD memory card inserted into the GT’s onboard SD memory card slot
can now be sent to a PC using a USB connection.
Installation on the PC of GT_SD_Reader software is required. This software is installed simultaneously with Terminal GTWIN (Ver. 2.E1 and higher).
The GT unit firmware must be a version that supports this function. If you are using a version that does not support this function, please upgrade by downloading it from our website.
SD card data transfer function
SD / SDHC memory card PLC
GT series
SD Solutions
PC
SD / SDHC
memory card
GT series
SD / SDHC memory card PCGT series
● The LCD images on this page are composites.
* Our FP series, excluding FP7.
FEATURES 1
SD Solutions only
Panasonic can provide
As small-size touch panels have significantly improved their image quality,
easy to read displays with sharp characters are no longer special features these days.
Instead, programmable displays will evolve with maximum "user-friendliness"
in various applications with PCs or other devices.
As shown below, our touch panels exchange and store data using SD memory card,
data for many applications.
Links and expansion via SD
Expansion via SD
►►
Saving alarm history data on an SD
►►
Logging function
►►
Display of graphs of stored data
►►
SD recipe function (Data table management)
►►
Transfer of PLC program data
Links via SD
It is possible to modify PLC ladder programs as well as the GT screen programs by using an SD / SDHC memory card.
SD / SDHC memory card enables everyone to easily modify programs.
PLC program transfer without the use of a PC
● The GT unit can collect data, such as electrical power on an SD / SDHC memory card, and display the log data in a real time graph.
You can make data “Visualization” without using a PC as a display or Data logger for collecting data.
● One bar graph has a maximum of eight bars and can be combined with line graphs.
● The following three conditions can be selected to trigger an operation to save log data.
(1) Specified time (2) Specified cycle (1 sec. to 24 hrs.) (3) Specified condition
● Large volumes of data can be saved on an SD / SDHC memory card, which can be carried with you.
SD logging function to produce data “Visualization”
Capable of automatically collecting electrical power readings of Eco-POWER METERS and displaying them in a
real time graph, allowing users to take quick actions for solutions.
Data collection and
graph creation
For high-mix production, recipe data up to 64 types and 4,096
devices in total, can be easily set on a PC. The created recipe data
is saved on an SD / SDHC memory card, and the specified data can
be written or read from a PLC.
SD recipe function
Write and Read
Product A
A
DT10
DT20
DT21
DT22
B
10
20
40
50
1
2
3
4
5
6
7
8
9
Product A
A
DT10
DT20
DT21
DT22
B
10
20
40
50
1
2
3
4
5
6
7
8
9
Product A
A
DT10
DT20
DT21
DT22
B
10
20
40
50
1
2
3
4
5
6
7
8
9
The alarm history data stored in the GT built-in memory can be
saved on an SD / SDHC memory card, making it possible to easily
control problems on a PC.
Saving alarm history data on an
SD / SDHC memory card
06
07
If If g g g 1-3! I 1-3! I 1-3! I
PLC built-in
memory
Product A
A
DT10
DT20
DT21
DT22
B
10
20
40
50
1
2
3
4
5
6
7
8
9
SD / SDHC
memory card
Product A Product B
A
DT10
DT20
DT21
DT22
B
10
20
40
50
1
2
3
4
5
6
7
8
9
A
DT10
DT20
DT21
DT22
B
20
50
70
90
1
2
3
4
5
6
7
8
9
SD SolutionsSD Solutions Touch panel
PLC (FP7)
PLC
Eco-POWER METER
Data Logger
Image Processing Device
CT
CT
CT
Log and other data saved on a SD memory card inserted into the GT’s onboard SD memory card slot
can now be sent to a PC using a USB connection.
Installation on the PC of GT_SD_Reader software is required. This software is installed simultaneously with Terminal GTWIN (Ver. 2.E1 and higher).
The GT unit firmware must be a version that supports this function. If you are using a version that does not support this function, please upgrade by downloading it from our website.
SD card data transfer function
SD / SDHC memory card PLC
GT series
SD Solutions
PC
SD / SDHC
memory card
GT series
SD / SDHC memory card PCGT series
● The LCD images on this page are composites.
* Our FP series, excluding FP7.
FEATURES 1
SD Solutions only
Panasonic can provide
As small-size touch panels have significantly improved their image quality,
easy to read displays with sharp characters are no longer special features these days.
Instead, programmable displays will evolve with maximum "user-friendliness"
in various applications with PCs or other devices.
As shown below, our touch panels exchange and store data using SD memory card,
data for many applications.
Links and expansion via SD
Expansion via SD
►►
Saving alarm history data on an SD
►►
Logging function
►►
Display of graphs of stored data
►►
SD recipe function (Data table management)
►►
Transfer of PLC program data
Links via SD
It is possible to modify PLC ladder programs as well as the GT screen programs by using an SD / SDHC memory card.
SD / SDHC memory card enables everyone to easily modify programs.
PLC program transfer without the use of a PC
● The GT unit can collect data, such as electrical power on an SD / SDHC memory card, and display the log data in a real time graph.
You can make data “Visualization” without using a PC as a display or Data logger for collecting data.
● One bar graph has a maximum of eight bars and can be combined with line graphs.
● The following three conditions can be selected to trigger an operation to save log data.
(1) Specified time (2) Specified cycle (1 sec. to 24 hrs.) (3) Specified condition
● Large volumes of data can be saved on an SD / SDHC memory card, which can be carried with you.
SD logging function to produce data “Visualization”
Capable of automatically collecting electrical power readings of Eco-POWER METERS and displaying them in a
real time graph, allowing users to take quick actions for solutions.
Data collection and
graph creation
For high-mix production, recipe data up to 64 types and 4,096
devices in total, can be easily set on a PC. The created recipe data
is saved on an SD / SDHC memory card, and the specified data can
be written or read from a PLC.
SD recipe function
Write and Read
Product A
A
DT10
DT20
DT21
DT22
B
10
20
40
50
1
2
3
4
5
6
7
8
9
Product A
A
DT10
DT20
DT21
DT22
B
10
20
40
50
1
2
3
4
5
6
7
8
9
Product A
A
DT10
DT20
DT21
DT22
B
10
20
40
50
1
2
3
4
5
6
7
8
9
The alarm history data stored in the GT built-in memory can be
saved on an SD / SDHC memory card, making it possible to easily
control problems on a PC.
Saving alarm history data on an
SD / SDHC memory card
06
07
Abnormal temperature m Macmne No 3. Check S the coolant level
Notes: 1) Our FP series PLC
2) As the number of connected units increases, the response slows down. Check the speed in the actual line.
(Note 1)
Up to 31 units can
be connected.
Five convenient features of GT series for improved compatibility with our FP series of PLCs
Device monitor (Display and change values of FP series devices. Three different modes available)
(1) Easy monitor mode: Use this mode when you want to monitor something. Display is continuous when one device is specified and the
device can be changed.
(2) Entry monitor mode: Use this mode when you want to monitor multiple devices. You can register devices you want to display one-by-one
and you can change them.
(3) Forced on / off mode: Use this mode feature to forcibly turn output on and off. You can set
devices one-by-one for which you want to control output.
System register monitor (Display and change of system register values.)
You can specify the system register number, display the value, and change it.
Shared memory monitor (Display shared memory values.)
You can specify the slot number, bank number and address, and display the value. You
cannot change the value.
Error monitor (Display an error occurring in the FP series PLC.)
You can display the self-diagnostic result, error code and error flag, and you can even clear the error.
Password setting (Set the password to protect FP series program reading and writing functions.)
Password registration and clearing is possible for the FP series password protection function.
FP monitoring function (FP2SH, FP0R, FP-Σ, FP-X, FP-X0, FP-e, FP0 and FP2)*Excluding FP7
● The LCD images on this page are composites.
1
2
3
4
5
Device
information
Monitor PLC
FEATURES 2
FEATURES 3
High Visibility and Excellent
Operability
(In operation)
(Normal)
(Emergency)
The monochrome display* has a three-color LED
backlight. It allows operators to check the
equipment status at a glance by changing the
background color.
Example: green under normal conditions, orange
during operation, and red in emergency situations.
Three-color LED backlights allows for checking machine status at a glance
(GT02M / GT02G, GT05M / GT05G, GT12M / GT12G)
GT05G GT02GGT12G
* Excluding GT03M-E, GT32M-E, GT32M and GT02L
Please input the numerical value.
Please input the numerical value.
3D-design buttons with higher
visibility and operability are
available.
4,096-color parts libraries
(GT05S, GT32T, GT03T-E and GT32T-E)
Flow display function
Highly flexible screen design!
Graph function
GT series displays use an analog-touch panel where locations of parts and characters can be adjusted in increments of one dot. The adoption of the
Windows® font has widened the character size selection (10 to 240 dots), making the screen design more flexible. *The maximum size varies depending on the model.
One bar graph has a maximum
of eight bars and can be
combined with line graphs.
Portrait display ideal for narrow
spaces
The unit can display screens in portrait
orientation and can therefore be installed in
narrow spaces, expanding system design
possibilities and contributing to size reduction.
The portrait display is also ideal for slim
equipment without enough space to install a
display.
Multiple operations are possible. For example, screens can be
switched by setting multiple values.
Multi-function switches
“TrueType fonts”“Analog-touch design”
The adoption of the Windows® font has
made it possible to choose a font
focusing on the screen image and
visual quality.
A flowing message of up to 64
characters (two-byte) can be
displayed at the bottom of the
screen. (128 messages)
Error warning by voice messages (GT32T1)
Voice messages or melodies immediately communicate the
equipment status to operators not located near the equipment.
The sound files are compatible with WAV format, which can be
easily prepared by a PC.
GT32T1
Abnormal
temperature
in Machine
No. 3. Check
the coolant
level.
Advanced Functions to
Enhance Work Efficiency
Up to 32 GT displays can be connected to one PLC unit without
communication programs. The same screen operation is possible at
a conveyor line or other remote locations, and the number of PLC
units can be reduced, cutting the production process costs.
GT link function
Up to 31 PLC units can be connected to one GT unit. Progress in
multiple production lines can be centrally monitored and controlled
via one GT unit.
Connectivity with multiple PLCs
Multiple GT displays can be connected to our FP series PLC.
Up to 32 displays can
be connected. (Note 2)
The screen data upload operation can be restricted by using
passwords to protect the data asset in the display unit.
Up to 64 operators can set individual passwords, and up to 16 levels
of restrictions can be set on displays and operations for each part. The
registered users and passwords can be changed on the display unit.
Operation security functionPassword protection function
Password protection and operation security functions protect the data asset in the display unit and control the authorization for operation.
Enhanced security with password protection
This function allows operators to simultaneously carry out the transfer of screen data of a GT series display and the debugging of our FP series
PLC connected to the display.
GT32T1 supports Ethernet connection, which allows the through function to be controlled from a remote location.
High-efficiency operation with through function
Easy-to-switch language Write device function
Conventionally, screens were created for each language. With
this new language switching function, data can be registered in
multiple languages (up to 16) for each part. The characters can
be easily edited with Microsoft Excel® and then imported.
This function modifies the
PLC data or turns bits on / off
according to the PLC status
or the screen No. Now four
arithmetic operations
between devices are also
possible.
08
09
WWW—.3”. ~. m-u noc- . . an I
Notes: 1) Our FP series PLC
2) As the number of connected units increases, the response slows down. Check the speed in the actual line.
(Note 1)
Up to 31 units can
be connected.
Five convenient features of GT series for improved compatibility with our FP series of PLCs
Device monitor (Display and change values of FP series devices. Three different modes available)
(1) Easy monitor mode: Use this mode when you want to monitor something. Display is continuous when one device is specified and the
device can be changed.
(2) Entry monitor mode: Use this mode when you want to monitor multiple devices. You can register devices you want to display one-by-one
and you can change them.
(3) Forced on / off mode: Use this mode feature to forcibly turn output on and off. You can set
devices one-by-one for which you want to control output.
System register monitor (Display and change of system register values.)
You can specify the system register number, display the value, and change it.
Shared memory monitor (Display shared memory values.)
You can specify the slot number, bank number and address, and display the value. You
cannot change the value.
Error monitor (Display an error occurring in the FP series PLC.)
You can display the self-diagnostic result, error code and error flag, and you can even clear the error.
Password setting (Set the password to protect FP series program reading and writing functions.)
Password registration and clearing is possible for the FP series password protection function.
FP monitoring function (FP2SH, FP0R, FP-Σ, FP-X, FP-X0, FP-e, FP0 and FP2)*Excluding FP7
● The LCD images on this page are composites.
1
2
3
4
5
Device
information
Monitor PLC
FEATURES 2
FEATURES 3
High Visibility and Excellent
Operability
(In operation)
(Normal)
(Emergency)
The monochrome display* has a three-color LED
backlight. It allows operators to check the
equipment status at a glance by changing the
background color.
Example: green under normal conditions, orange
during operation, and red in emergency situations.
Three-color LED backlights allows for checking machine status at a glance
(GT02M / GT02G, GT05M / GT05G, GT12M / GT12G)
GT05G GT02GGT12G
* Excluding GT03M-E, GT32M-E, GT32M and GT02L
Please input the numerical value.
Please input the numerical value.
3D-design buttons with higher
visibility and operability are
available.
4,096-color parts libraries
(GT05S, GT32T, GT03T-E and GT32T-E)
Flow display function
Highly flexible screen design!
Graph function
GT series displays use an analog-touch panel where locations of parts and characters can be adjusted in increments of one dot. The adoption of the
Windows® font has widened the character size selection (10 to 240 dots), making the screen design more flexible. *The maximum size varies depending on the model.
One bar graph has a maximum
of eight bars and can be
combined with line graphs.
Portrait display ideal for narrow
spaces
The unit can display screens in portrait
orientation and can therefore be installed in
narrow spaces, expanding system design
possibilities and contributing to size reduction.
The portrait display is also ideal for slim
equipment without enough space to install a
display.
Multiple operations are possible. For example, screens can be
switched by setting multiple values.
Multi-function switches
“TrueType fonts”“Analog-touch design”
The adoption of the Windows® font has
made it possible to choose a font
focusing on the screen image and
visual quality.
A flowing message of up to 64
characters (two-byte) can be
displayed at the bottom of the
screen. (128 messages)
Error warning by voice messages (GT32T1)
Voice messages or melodies immediately communicate the
equipment status to operators not located near the equipment.
The sound files are compatible with WAV format, which can be
easily prepared by a PC.
GT32T1
Abnormal
temperature
in Machine
No. 3. Check
the coolant
level.
Advanced Functions to
Enhance Work Efficiency
Up to 32 GT displays can be connected to one PLC unit without
communication programs. The same screen operation is possible at
a conveyor line or other remote locations, and the number of PLC
units can be reduced, cutting the production process costs.
GT link function
Up to 31 PLC units can be connected to one GT unit. Progress in
multiple production lines can be centrally monitored and controlled
via one GT unit.
Connectivity with multiple PLCs
Multiple GT displays can be connected to our FP series PLC.
Up to 32 displays can
be connected. (Note 2)
The screen data upload operation can be restricted by using
passwords to protect the data asset in the display unit.
Up to 64 operators can set individual passwords, and up to 16 levels
of restrictions can be set on displays and operations for each part. The
registered users and passwords can be changed on the display unit.
Operation security functionPassword protection function
Password protection and operation security functions protect the data asset in the display unit and control the authorization for operation.
Enhanced security with password protection
This function allows operators to simultaneously carry out the transfer of screen data of a GT series display and the debugging of our FP series
PLC connected to the display.
GT32T1 supports Ethernet connection, which allows the through function to be controlled from a remote location.
High-efficiency operation with through function
Easy-to-switch language Write device function
Conventionally, screens were created for each language. With
this new language switching function, data can be registered in
multiple languages (up to 16) for each part. The characters can
be easily edited with Microsoft Excel® and then imported.
This function modifies the
PLC data or turns bits on / off
according to the PLC status
or the screen No. Now four
arithmetic operations
between devices are also
possible.
08
09
Screen
size
Power
supply
GT02M GT02G
GT12G GT12M
GT05M GT05G
GT32T0
P. 11
P.12
P.13
P.14
P.15
P.15
GT32T1
GT05S GT05S
External
interface
Display
Display type Display
color Resolution Backlight
Displayable
characters
(Note)
Memory
capacity
(F-ROM)
USB
port
SD / SDHC
memory
card
5 V DC
24 V DC
5 V DC
Entry-level
model
GT series
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
3.8
inch
3.7
inch
4.6
inch
3.5
inch
3.5
inch
5.7
inch
5.5
inch
STN monochrome
LCD
240(W) × 96(H)
dots
STN monochrome
LCD
160(W) × 64(H)
dots
STN monochrome
LCD
320(W) × 120(H)
dots
STN monochrome
LCD
320(W) × 240(H)
dots
TFT color LCD
4,096
colors
320(W) × 240(H)
dots
STN monochrome
LCD
320(W) × 240(H)
dots
TFT color LCD
4,096
colors
320(W) × 240(H)
dots
White LED 768
characters 12 Mbyte ○ ○
CFL 768
characters 2 Mbyte ○ ○
CFL 768
characters 12 Mbyte ○ ○
White LED
GT02M:
3-color LED
(white / pink / red)
GT02G:
3-color LED
(green / orange / red)
96
characters 704 kbyte ○
(mini)
—
—
○
(mini) ○
384
characters 2 Mbyte ○
(mini) ○
AIG02MQ2*D
and
AIG02GQ2*D
only
AIG12MQ1*D
and
AIG12GQ1*D
only
GT05M:
3-color LED
(white / pink / red)
GT05G:
3-color LED
(green / orange / red)
768
characters 2 Mbyte ○ ○
216
characters 2 Mbyte
GT12M:
3-color LED
(white / pink / red)
GT12G:
3-color LED
(green / orange / red)
Note: With the 10-dot font
GT02
GT02L
GT12
GT05
GT32M
GT32T
P. 5
P. 4
24 V DC
24 V DC
Environ-
mentally-
resistant
Tough
series
5.7
inch
5.7
inch
TFT color LCD
320(W) × 240(H)
dots
TFT monochrome
LCD
4,096
colors
320(W) × 240(H)
dots White LED
White LED
768
characters 12 Mbyte ○ ○
24 V DC 3.5
inch
TFT monochrome
LCD
2 colors
black /
white
16-gray
scale
320(W) × 240(H)
dots White LED 768
characters 6 Mbyte ○
(mini)
○ ○
768
characters 12 Mbyte
24 V DC 3.5
inch
TFT color LCD
320(W) × 240(H)
dots
4,096
colors White LED ○
(mini) ○
768
characters 12 Mbyte
GT32-E
GT32T-E
GT32M-E
GT03-E
GT03T-E
GT03M-E
GT05M / GT05G
GT05S
GT32T1 has
Ethernet and
sound output ports.
○: Available
—: Not available
Portrait
3.7 inch STN
monochrome
(white/black)
16 chars.
× 6 lines
(10-dot font)
USB
mini
160 ×
64
dots
IP65
• The panel face protection sheet for the GT series is available as an option.
5 V
DC
The small body of 74 mm 2.913 in high and 112 mm 4.409 in wide is equipped with a 3.7 inch large LCD. The analog touch system does not
display any annoying visible dots or lines.
Installation in narrow spaces is possible, enhancing the degree of system design freedom.
Compact body with a wide LCD that is the largest size in its class
Flexible sizing and layout available for switches and characters
Switches of a minimum of 8 × 8 dots can be moved in increments of one dot. A wide range
of character fonts and sizes (10 to 64 dots) are supported.
Portrait orientation ideal for narrow spaces
MiniUSB interface as standard equipment
Supports the through function using a USB cable, allowing simultaneous debugging of PLC and GT.
74 mm
2.913 in
112 mm
4.409 in
Black
Programmable Display
Connector
for communication
and power supply
Operation
mode switch
miniUSB port
To PLC
To PC
FP series PLC
connection cable
AIGT8142
For replacing your touch panel
For replacement of your membrane-type switch panel
Entry-level Model Touch Panel
Entry-level model
White
LED
The customizable button layout and
switchable screens make design
modification and maintenance easier.
Contributes to the
miniaturization of
control panels.
3.7 inch
● The LCD images on this page are composites.
( )
( )
2 colors
black /
white
16-gray
scale
( )
( )
2 colors
black /
white
8-gray
scale
( )
( )
2 colors
black /
white
( )
2 colors
black /
white
( )
2 colors
black /
white
( )
2 colors
blue /
white
( )
10
11
GTOZL I C E GD CWMLJ k—H m I E *“V'Il AIEE 1% J: Dill-DEI-
Screen
size
Power
supply
GT02M GT02G
GT12G GT12M
GT05M GT05G
GT32T0
P. 11
P.12
P.13
P.14
P.15
P.15
GT32T1
GT05S GT05S
External
interface
Display
Display type Display
color Resolution Backlight
Displayable
characters
(Note)
Memory
capacity
(F-ROM)
USB
port
SD / SDHC
memory
card
5 V DC
24 V DC
5 V DC
Entry-level
model
GT series
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
3.8
inch
3.7
inch
4.6
inch
3.5
inch
3.5
inch
5.7
inch
5.5
inch
STN monochrome
LCD
240(W) × 96(H)
dots
STN monochrome
LCD
160(W) × 64(H)
dots
STN monochrome
LCD
320(W) × 120(H)
dots
STN monochrome
LCD
320(W) × 240(H)
dots
TFT color LCD
4,096
colors
320(W) × 240(H)
dots
STN monochrome
LCD
320(W) × 240(H)
dots
TFT color LCD
4,096
colors
320(W) × 240(H)
dots
White LED 768
characters 12 Mbyte ○ ○
CFL 768
characters 2 Mbyte ○ ○
CFL 768
characters 12 Mbyte ○ ○
White LED
GT02M:
3-color LED
(white / pink / red)
GT02G:
3-color LED
(green / orange / red)
96
characters 704 kbyte ○
(mini)
—
—
○
(mini) ○
384
characters 2 Mbyte ○
(mini) ○
AIG02MQ2*D
and
AIG02GQ2*D
only
AIG12MQ1*D
and
AIG12GQ1*D
only
GT05M:
3-color LED
(white / pink / red)
GT05G:
3-color LED
(green / orange / red)
768
characters 2 Mbyte ○ ○
216
characters 2 Mbyte
GT12M:
3-color LED
(white / pink / red)
GT12G:
3-color LED
(green / orange / red)
Note: With the 10-dot font
GT02
GT02L
GT12
GT05
GT32M
GT32T
P. 5
P. 4
24 V DC
24 V DC
Environ-
mentally-
resistant
Tough
series
5.7
inch
5.7
inch
TFT color LCD
320(W) × 240(H)
dots
TFT monochrome
LCD
4,096
colors
320(W) × 240(H)
dots White LED
White LED
768
characters 12 Mbyte ○ ○
24 V DC 3.5
inch
TFT monochrome
LCD
2 colors
black /
white
16-gray
scale
320(W) × 240(H)
dots White LED 768
characters 6 Mbyte ○
(mini)
○ ○
768
characters 12 Mbyte
24 V DC 3.5
inch
TFT color LCD
320(W) × 240(H)
dots
4,096
colors White LED ○
(mini) ○
768
characters 12 Mbyte
GT32-E
GT32T-E
GT32M-E
GT03-E
GT03T-E
GT03M-E
GT05M / GT05G
GT05S
GT32T1 has
Ethernet and
sound output ports.
○: Available
—: Not available
Portrait
3.7 inch STN
monochrome
(white/black)
16 chars.
× 6 lines
(10-dot font)
USB
mini
160 ×
64
dots
IP65
• The panel face protection sheet for the GT series is available as an option.
5 V
DC
The small body of 74 mm 2.913 in high and 112 mm 4.409 in wide is equipped with a 3.7 inch large LCD. The analog touch system does not
display any annoying visible dots or lines.
Installation in narrow spaces is possible, enhancing the degree of system design freedom.
Compact body with a wide LCD that is the largest size in its class
Flexible sizing and layout available for switches and characters
Switches of a minimum of 8 × 8 dots can be moved in increments of one dot. A wide range
of character fonts and sizes (10 to 64 dots) are supported.
Portrait orientation ideal for narrow spaces
MiniUSB interface as standard equipment
Supports the through function using a USB cable, allowing simultaneous debugging of PLC and GT.
74 mm
2.913 in
112 mm
4.409 in
Black
Programmable Display
Connector
for communication
and power supply
Operation
mode switch
miniUSB port
To PLC
To PC
FP series PLC
connection cable
AIGT8142
For replacing your touch panel
For replacement of your membrane-type switch panel
Entry-level Model Touch Panel
Entry-level model
White
LED
The customizable button layout and
switchable screens make design
modification and maintenance easier.
Contributes to the
miniaturization of
control panels.
3.7 inch
● The LCD images on this page are composites.
( )
( )
2 colors
black /
white
16-gray
scale
( )
( )
2 colors
black /
white
8-gray
scale
( )
( )
2 colors
black /
white
( )
2 colors
black /
white
( )
2 colors
black /
white
( )
2 colors
blue /
white
( )
10
11
LILLLLEJLLL
GT series
GT02G
GT02M
3.8 inch
74 mm
2.913 in
3.8 inch STN
monochrome
(white/black)
24 chars.
× 9 lines
(10-dot font)
SD
HC
USB
mini
240 ×
96
dots
*1: Based on research conducted by our company as of
June, 2013
*2: Class 10 compatible with a card of up to 32 GB.
• The panel face protection sheet for the GT series is
available as an option.
5 V DC/
24 V DC
3-color LED
(white/pink/red)
(green/orange/red)
Bright three-color LED backlight indicates the equipment status.
The color combination is green / orange / red or white / red / pink. The backlight ensures both operability and visibility.
(M type)
(G type)
High-definition 240 × 96 dots LCD produces crisp images. The analog touch screen technology does not display any annoying visible dots or lines.
Largest 3.8 inch high-contrast monochrome LCD in its class provides top-level viewability*1.
First SD / SDHC memory card slot in its class*2
AIG02MQ2*D and AIG02GQ2*D are equipped with an SD / SDHC memory card slot.
Easy to copy, back up, and restore screen data.
MiniUSB interface as standard equipment
Supports the through function using a USB cable, allowing simultaneous debugging of PLC and GT.
Portrait orientation ideal for narrow spaces
Installation in narrow spaces is possible, enhancing the degree of system design freedom.
Flexible sizing and layout available for switches and characters
Switches of a minimum of 8 × 8 dots can be moved in increments of one dot. A wide range of character fonts and sizes
(10 to 96 dots) are supported.
Equipped with IP67-rated body and newly designed bracket
White Pink Red
Green Orange Red
Battery holder
Connector for
communication
and power supply
SD
memory
card slot
miniUSB port
27 mm
1.063 in
To PLC
To PC
FP series PLC
connection cable
AIGT8162 and
AIGT8142
112 mm
4.409 in
Pure black Hairline silver
Programmable Display
Compact advanced display with 3.8 inch high-contrast monochrome LCD
(for clear and vivid images)
Application example:
Water purifier
Portrait
IP67
GT12M
GT12G
4.6 inch
Programmable Display
Slim body equipped with a 4.6 inch Half-QVGA LCD
The highest visual quality in its class
Pure black Hairline silver
74 mm
2.913 in
146 mm
5.748 in
*1: Based on research conducted by our company as of June, 2013
*2: Class 10 compatible with a card of up to 32 GB.
• The panel face protection sheet for the GT series is available as an option.
SD
HC
24 V
DC
High-definition Half-QVGA (320 × 120) LCD produces crisp images. The analog touch screen technology does not display any annoying visible dots or lines.
Largest 4.6 inch high-contrast monochrome Half-QVGA LCD in its class provides top-level viewability
*1
.
Application example:
Business dishwasher
Bright three-color LED backlight indicates the equipment status.
The color combination is green / orange / red or white / red / pink. The backlight ensures both operability and visibility.
(M type)
(G type)
White Pink Red
Green Orange Red
First SD / SDHC memory card slot in its class*2
AIG12MQ1*D and AIG12GQ1*D are equipped with an SD / SDHC memory card slot.
Easy to copy, back up, and restore screen data.
MiniUSB interface as standard equipment
Supports the through function using a USB cable, allowing simultaneous
debugging of PLC and GT.
Flexible sizing and layout available for switches and characters
Switches of a minimum of 8 × 8 dots can be moved in increments of one dot.
A wide range of character fonts and sizes (10 to 120 dots) are supported.
Transformer-isolated power supply
The isolated power supply enhances the reliability.
Portrait orientation ideal for narrow spaces
Installation in narrow spaces is possible, enhancing the degree of system design freedom.
Equipped with IP67-rated body and
newly designed bracket
miniUSB port
30 mm
1.181 in
To PLC
To PC
FP series PLC
connection
cable
AIGT8162
Connector for communication
and power supply
Battery
holder
STN
monochrome
(white/black)
32 chars.
× 12 lines
(10-dot font)
USB
mini
320
× 120
dots
4.6 inch
3-color
LED
(white/pink/red)
(green/orange/red)
Portrait
GT series
IP67
SD memory
card slot
12
13
"-9- LLLLLLLJLLL
GT series
GT02G
GT02M
3.8 inch
74 mm
2.913 in
3.8 inch STN
monochrome
(white/black)
24 chars.
× 9 lines
(10-dot font)
SD
HC
USB
mini
240 ×
96
dots
*1: Based on research conducted by our company as of
June, 2013
*2: Class 10 compatible with a card of up to 32 GB.
• The panel face protection sheet for the GT series is
available as an option.
5 V DC/
24 V DC
3-color LED
(white/pink/red)
(green/orange/red)
Bright three-color LED backlight indicates the equipment status.
The color combination is green / orange / red or white / red / pink. The backlight ensures both operability and visibility.
(M type)
(G type)
High-definition 240 × 96 dots LCD produces crisp images. The analog touch screen technology does not display any annoying visible dots or lines.
Largest 3.8 inch high-contrast monochrome LCD in its class provides top-level viewability*1.
First SD / SDHC memory card slot in its class*2
AIG02MQ2*D and AIG02GQ2*D are equipped with an SD / SDHC memory card slot.
Easy to copy, back up, and restore screen data.
MiniUSB interface as standard equipment
Supports the through function using a USB cable, allowing simultaneous debugging of PLC and GT.
Portrait orientation ideal for narrow spaces
Installation in narrow spaces is possible, enhancing the degree of system design freedom.
Flexible sizing and layout available for switches and characters
Switches of a minimum of 8 × 8 dots can be moved in increments of one dot. A wide range of character fonts and sizes
(10 to 96 dots) are supported.
Equipped with IP67-rated body and newly designed bracket
White Pink Red
Green Orange Red
Battery holder
Connector for
communication
and power supply
SD
memory
card slot
miniUSB port
27 mm
1.063 in
To PLC
To PC
FP series PLC
connection cable
AIGT8162 and
AIGT8142
112 mm
4.409 in
Pure black Hairline silver
Programmable Display
Compact advanced display with 3.8 inch high-contrast monochrome LCD
(for clear and vivid images)
Application example:
Water purifier
Portrait
IP67
GT12M
GT12G
4.6 inch
Programmable Display
Slim body equipped with a 4.6 inch Half-QVGA LCD
The highest visual quality in its class
Pure black Hairline silver
74 mm
2.913 in
146 mm
5.748 in
*1: Based on research conducted by our company as of June, 2013
*2: Class 10 compatible with a card of up to 32 GB.
• The panel face protection sheet for the GT series is available as an option.
SD
HC
24 V
DC
High-definition Half-QVGA (320 × 120) LCD produces crisp images. The analog touch screen technology does not display any annoying visible dots or lines.
Largest 4.6 inch high-contrast monochrome Half-QVGA LCD in its class provides top-level viewability
*1
.
Application example:
Business dishwasher
Bright three-color LED backlight indicates the equipment status.
The color combination is green / orange / red or white / red / pink. The backlight ensures both operability and visibility.
(M type)
(G type)
White Pink Red
Green Orange Red
First SD / SDHC memory card slot in its class*2
AIG12MQ1*D and AIG12GQ1*D are equipped with an SD / SDHC memory card slot.
Easy to copy, back up, and restore screen data.
MiniUSB interface as standard equipment
Supports the through function using a USB cable, allowing simultaneous
debugging of PLC and GT.
Flexible sizing and layout available for switches and characters
Switches of a minimum of 8 × 8 dots can be moved in increments of one dot.
A wide range of character fonts and sizes (10 to 120 dots) are supported.
Transformer-isolated power supply
The isolated power supply enhances the reliability.
Portrait orientation ideal for narrow spaces
Installation in narrow spaces is possible, enhancing the degree of system design freedom.
Equipped with IP67-rated body and
newly designed bracket
miniUSB port
30 mm
1.181 in
To PLC
To PC
FP series PLC
connection
cable
AIGT8162
Connector for communication
and power supply
Battery
holder
STN
monochrome
(white/black)
32 chars.
× 12 lines
(10-dot font)
USB
mini
320
× 120
dots
4.6 inch
3-color
LED
(white/pink/red)
(green/orange/red)
Portrait
GT series
IP67
SD memory
card slot
12
13
LLLLLLLLMALL
FPWIN GR
GTWIN
PC
Ethernet
GT32
FP series PLC
Hairline silverPure black
163.2 mm
6.425 in
128.8 mm
5.071 in
163.2 mm
6.425 in
Hairline silverPure black
*1: The backlight life varies depending on the
environmental conditions of use, including the
temperature, humidity, and operating voltage.
*2: The backlight type for GT32M cannot be changed.
*3: Class 10 compatible with a card of up to 32 GB.
• The panel face protection sheet for the GT series
is available as an option.
USB
24 V
DC
Programmable Display
Clear and beautiful display achieved by the blue LCD long-life backlight
Programmable Display
Amazingly beautiful and vivid 4,096 colors TFT LCD
Audio information as well as visual and tactile information allows for
more reliable control by operators.
GT32T1 supports Ethernet connection, allowing for the through
function for our FP series PLC in
a remote location.
Sound
output jack
Speaker equipped
with amplifier
Attention
GT32T1 supports:
USB
24 V
DC
*1: Class 10 compatible with a card of up to 32 GB.
• The panel face protection sheet for the GT series is
available as an option.
Sound output function Ethernet connection
SD
HC
SD
HC
SD memory
card slot
39.1 mm
1.539 in
5.2 mm
0.205 in
USB port
To PC
Connector for
communication
and power supply
To PLC
SD memory
card slot
Ethernet port (GT32T1)
Sound output jack (GT32T1)
39.1 mm
1.539 in
5.2 mm
0.205 in
USB port
To PC
Connector
for communication
and power supply
To PLC
FP series PLC connection cable AIGT8162
5.7 inch
5.5 inch
IP65
IP65
Programmable Display
Compact size and equipped with a QVGA LCD.
Both the color and monochrome types display striking images.
SD
memory
card slot
USB port
Battery holder and
operation mode switch
3.5 inch high-contrast monochrome QVGA LCD provides
higher visibility than our conventional model.
GT05M displays screens in white, red, and pink, and GT05G in green, orange, and red,
ensuring both operability and visibility.
Bright LED backlight adopted
GT05M: red GT05M: pink
Much easier to view thanks to switch from STN to
TFT LCD
3.5 inch TFT 4,096 colors QVGA
LCD with a wide viewing angle
Bright LED backlight adopted
Pure black
GT05G: orange GT05G: red
Hairline silver
GT05M GT05G
GT05S
92.2 mm
3.630 in
110 mm
4.331 in
Pure black
*1: Class 10 compatible with a card of up to 32 GB.
• The panel face protection sheet for the GT series is available as an option.
● GT05M
● GT05G
● GT05M
● GT05G
● GT05S ● GT05S
USB
24 V
DC
Common features
GT05M / GT05G GT05S
To PC
To PLC
FP series PLC
connection cable
AIGT8162
SD
HC
3.5 inch
GT series
IP65
Easy to copy, back up, and restore screen data.
SD / SDHC memory card slot as standard equipment*1
Supports the through function using a USB cable, allowing simultaneous debugging
of PLC and GT
USB interface as standard equipment
Capable of displaying several fine 10-dot characters or one 240 dots character in full screen
Characters of a 240 dots maximum size can be displayed.
The isolated power supply enhances the reliability.
Transformer-isolated power supply
Connector for communication
and power supply
33.8 mm
1.331 in
3.9 mm
0.154 in
3.5 inch
STN
monochrome
(white/black)
3-color
LED
(white/pink/red)
(green/orange/red)
TFT
4,096
colors
White
LED
32 chars.
× 24 lines
(10-dot font)
320
× 240
dots
Portrait
SD / SDHC memory card slot as standard equipment*3
Easy to copy, back up, and restore screen data.
Industry’s smallest size in the class, and 39.1 mm 1.539 in thin
and cool body design
Large display with space-saving outer dimensions of 163.2 × 128.8 × 39.1 mm 6.425 × 5.071 × 1.539 in
Although the backlight is a CFL type, it can last as long as 75,000 hours *1, reducing maintenance
frequency.*2
5.7 inch blue LCD equipped with 75,000 hours long life backlight
USB interface as standard equipment
You can connect your PC and GT32 using your USB cable to transfer screen data.
When used with our FP series PLC, this display supports the through function, which allows
simultaneous debugging of the PLC and the display.
Transformer-isolated power supply
The isolated power supply enhances the reliability.
4,096 colors TFT LCD screen displays magnificent quality images.
Useful for copying, backing up, and restoring screen data, and for saving sound files
Sound files can also be saved in the internal memory of the display.
SD / SDHC memory card slot as standard equipment
*1
Transformer-isolated power supply
USB interface as standard equipment
128.8 mm
5.071 in
FP series PLC connection cable AIGT8162
STN
monochrome
(white/blue)
CFL
backlight
32 chars.
x 24 lines
(10-dot font)
320
x 240
dots
5.7 inch
Portrait
Portrait
CFL
backlight
TFT
4,096
colors
32 chars.
× 24 lines
(10-dot font)
5.5 inch
320
× 240
dots
Ether
net
Sound
output
● GT32T1 ● GT32T1
14
15
GT32T ce @ ' \ H—H I” DIIIID DIIIIIII
FPWIN GR
GTWIN
PC
Ethernet
GT32
FP series PLC
Hairline silverPure black
163.2 mm
6.425 in
128.8 mm
5.071 in
163.2 mm
6.425 in
Hairline silverPure black
*1: The backlight life varies depending on the
environmental conditions of use, including the
temperature, humidity, and operating voltage.
*2: The backlight type for GT32M cannot be changed.
*3: Class 10 compatible with a card of up to 32 GB.
• The panel face protection sheet for the GT series
is available as an option.
USB
24 V
DC
Programmable Display
Clear and beautiful display achieved by the blue LCD long-life backlight
Programmable Display
Amazingly beautiful and vivid 4,096 colors TFT LCD
Audio information as well as visual and tactile information allows for
more reliable control by operators.
GT32T1 supports Ethernet connection, allowing for the through
function for our FP series PLC in
a remote location.
Sound
output jack
Speaker equipped
with amplifier
Attention
GT32T1 supports:
USB
24 V
DC
*1: Class 10 compatible with a card of up to 32 GB.
• The panel face protection sheet for the GT series is
available as an option.
Sound output function Ethernet connection
SD
HC
SD
HC
SD memory
card slot
39.1 mm
1.539 in
5.2 mm
0.205 in
USB port
To PC
Connector for
communication
and power supply
To PLC
SD memory
card slot
Ethernet port (GT32T1)
Sound output jack (GT32T1)
39.1 mm
1.539 in
5.2 mm
0.205 in
USB port
To PC
Connector
for communication
and power supply
To PLC
FP series PLC connection cable AIGT8162
5.7 inch
5.5 inch
IP65
IP65
Programmable Display
Compact size and equipped with a QVGA LCD.
Both the color and monochrome types display striking images.
SD
memory
card slot
USB port
Battery holder and
operation mode switch
3.5 inch high-contrast monochrome QVGA LCD provides
higher visibility than our conventional model.
GT05M displays screens in white, red, and pink, and GT05G in green, orange, and red,
ensuring both operability and visibility.
Bright LED backlight adopted
GT05M: red GT05M: pink
Much easier to view thanks to switch from STN to
TFT LCD
3.5 inch TFT 4,096 colors QVGA
LCD with a wide viewing angle
Bright LED backlight adopted
Pure black
GT05G: orange GT05G: red
Hairline silver
GT05M GT05G
GT05S
92.2 mm
3.630 in
110 mm
4.331 in
Pure black
*1: Class 10 compatible with a card of up to 32 GB.
• The panel face protection sheet for the GT series is available as an option.
● GT05M
● GT05G
● GT05M
● GT05G
● GT05S ● GT05S
USB
24 V
DC
Common features
GT05M / GT05G GT05S
To PC
To PLC
FP series PLC
connection cable
AIGT8162
SD
HC
3.5 inch
GT series
IP65
Easy to copy, back up, and restore screen data.
SD / SDHC memory card slot as standard equipment*1
Supports the through function using a USB cable, allowing simultaneous debugging
of PLC and GT
USB interface as standard equipment
Capable of displaying several fine 10-dot characters or one 240 dots character in full screen
Characters of a 240 dots maximum size can be displayed.
The isolated power supply enhances the reliability.
Transformer-isolated power supply
Connector for communication
and power supply
33.8 mm
1.331 in
3.9 mm
0.154 in
3.5 inch
STN
monochrome
(white/black)
3-color
LED
(white/pink/red)
(green/orange/red)
TFT
4,096
colors
White
LED
32 chars.
× 24 lines
(10-dot font)
320
× 240
dots
Portrait
SD / SDHC memory card slot as standard equipment*3
Easy to copy, back up, and restore screen data.
Industry’s smallest size in the class, and 39.1 mm 1.539 in thin
and cool body design
Large display with space-saving outer dimensions of 163.2 × 128.8 × 39.1 mm 6.425 × 5.071 × 1.539 in
Although the backlight is a CFL type, it can last as long as 75,000 hours *1, reducing maintenance
frequency.*2
5.7 inch blue LCD equipped with 75,000 hours long life backlight
USB interface as standard equipment
You can connect your PC and GT32 using your USB cable to transfer screen data.
When used with our FP series PLC, this display supports the through function, which allows
simultaneous debugging of the PLC and the display.
Transformer-isolated power supply
The isolated power supply enhances the reliability.
4,096 colors TFT LCD screen displays magnificent quality images.
Useful for copying, backing up, and restoring screen data, and for saving sound files
Sound files can also be saved in the internal memory of the display.
SD / SDHC memory card slot as standard equipment
*1
Transformer-isolated power supply
USB interface as standard equipment
128.8 mm
5.071 in
FP series PLC connection cable AIGT8162
STN
monochrome
(white/blue)
CFL
backlight
32 chars.
x 24 lines
(10-dot font)
320
x 240
dots
5.7 inch
Portrait
Portrait
CFL
backlight
TFT
4,096
colors
32 chars.
× 24 lines
(10-dot font)
5.5 inch
320
× 240
dots
Ether
net
Sound
output
● GT32T1 ● GT32T1
14
15
GTWIN
Now supports installation in a portrait
orientation of all GT series models.
(Also supports 64-bit version.)
Ver.2
User-friendly interface
makes screen creation easier.
Screen Creation Tool for the GT series
Compatible with Windows®7
The menu can be
indicated in
Japanese, English,
Simplified Chinese,
Traditional Chinese,
Korean, German,
Italian, Spanish and
French.
Compatible with the nine languages for
the menu
Japanese
English
Simplified Chinese
German
In the previous version,
the required parts library
had to be selected from
the menu every time it
was needed. The new
version displays a list of
parts libraries, making
them more user-friendly.
You can also freely set
the parts library window
size.
More user-friendly parts libraries
You can easily
create screens by
just dragging parts
from the library and
dropping them
anywhere you want.
Simply drag-and-drop parts.
You can output screen images in bitmap form and use them in
off-the-shelf applications. This is useful for preparing equipment
operation manuals.
Screen copy in bitmap form
3D design buttons
with higher visibility
and operability are
available.
4,096 colors 3D design buttons
(for GT05S, GT32T, GT03T-E and GT32T-E)
You can also
register your preset
original parts easily
by drag-and- drop
operations.
Just drag-and-drop your original parts to
be registered.
Function to turn on / off the display of
keyboard parts on the base screen
Indications of data parts in Japanese,
Simplified chinese, Traditional chinese,
and Korean
Required
disk space
400 MB min.
WIN
2000
WIN
XP
WIN
Vista
* The 64-bit version is not supported except for Windows® 7.
• GTWIN Ver. 2.8 or later is not compatible with Windows® 95, 98, Me or NT.
WIN
7
16
17
GTseries
PLC COMPATIBILITY TABLE
16
17
Models listed are the models that have been evaluated as of June, 2013.
Company
name Series Model RS232C
type
RS422 /
RS485 type*2
Company
name Series Model RS232C
type
RS422 /
RS485 type*2
Our company FP series
FP7
◎ ○
Omron*1
CS1 series
CS1H-CPU67 ◎
FP-X
◎ ○ CS1H-CPU66 ◎
FP-X0
◎ ○ CS1H-CPU65 ◎
FPΣ
◎ ○ CS1H-CPU64 ◎
FP-e
◎ ○ CS1H-CPU63 ◎
FP0
◎ ○ CS1G-CPU45 ◎
FP0R
◎ ○ CS1G-CPU44 ◎
FP2
◎ ○ CS1G-CPU43 ◎
FP2SH
◎ ○ CS1G-CPU42 ◎
Mitsubishi
Electric*1
FX series
FX0N
○ ◎
CJ series
CJ1H ◎
FX1S
○ ◎ CJ1M ◎
FX1N
○ ◎ CJ1G ◎
FX1NC
○ ◎ CJ2H ◎
FX2N
○ ◎
CP1 series
CP1H ○
FX2NC
○ ◎ CP1L ○
FX3UC
○ ◎ CP1E ◎*4 ○
FX3U
○ ◎ Toshiba
Machine*1 TC mini series ◎ ◎
FX3G
○ ◎
Models with RS232 port Models with RS485 port
FX3GC
◎
Yokogawa
Electric*1 FA-M3 series
F3SP59-7S ◎
Q series
Q00CPU
◎F3SP58-6S ◎
Q01CPU
◎F3SP58-6H ◎
Q00JCPU
○F3SP53-4S ◎
Q00HCPU
○F3SP53-4H ◎
Q00UJCPU
◎F3SP38-6S ◎
Q26UDHCPU
○ ○ F3SP38-6N ◎
Q25HCPU
◎F3SP35-5N ◎
Q12HCPU
◎F3SP28-3S ◎
Q06HCPU
◎F3SP28-3N ◎
Q02HCPU
◎F3SP25-2N ◎
Q02CPU
◎F3SP21-0N ◎
A series
A1N
○
KEYENCE*1
KV Nano series
◎
A2N
○
KV series
KV-10/16/24/40
◎
A3N
○KV700 ◎ ○
A1S
○KV1000 ◎ ○
A1SJ
○KV3000 ◎ ○
A2SH
○KV5000 ○ ○
A1SH
○
Hitachi
Industrial
Equipment
Systems*1
EH-150 EHV
series
EHV-CPU128 ◎ ◎
A2CCPU24
◎EHV-CPU64 ◎ ◎
L series
L26CPU-BT
○ ○ EHV-CPU32 ◎ ◎
L02SCPU
◎ ○ EHV-CPU16 ◎ ◎
Omron*1
C series
C200H
○
EH150 series
EH-CPU104A ◎ ◎
C200HS
◎EH-CPU208A ◎ ◎
C500
○EH-CPU316A ◎ ◎
C500F
○EH-CPU516 ◎ ◎
C1000H
○EH-CPU548 ◎ ◎
C2000
○
MICRO-EH
series
10-point
C2000H
○14 / 20-point ◎
C1000HF
○23 / 28-point ◎ ◎
C20H
◎40 / 64-point ◎
C28H
◎Web controller 10-point ◎
C40H
◎23-point ◎ ◎
C120
○Rockwell
Automation*1
(Allen-Bradley)
Models that
support
protocol
MicroLogix
series
MicroLogix500
◎
C120F
○
MicroLogix1000
◎
CQM1-CPU42
◎
MicroLogix1100
◎
SRM1-C02
◎SLC-500
series
SLC-5/03 ◎
CPM2A
◎SLC-5/04 ◎
CPM1-20CDR-A
○
Siemens*1 S7-200 series
CPU222 ○ ◎
CQM1H-CPU21
◎CPU216 ○ ◎
CPM2C
◎CPU215 ○ ◎
CPM2B
◎CPU214 ○ ◎
α series
C200HE-CPU32(-Z)
○CPU212 ○ ◎
C200HG-CPU33(-Z)
○LS Industrial
Systems*1
MASTER-K
series
80S / 200S ◎
C200HG-CPU53(-Z)
○300S / 1000S ○
C200HX-CPU34(-Z)
○Modbus*1
Models that support
RTU protocol
*3 ◎ ◎
C200HX-CPU54(-Z)
○
General-purpose serial
Our dedicated protocol
*3 ◎ ◎
C200HE-CPU42(-Z)
◎*1: PLCs other than our FP series may be limited in the type of device that can be used and addresses.
Please see manual for details.
*2: Communication may not be possible when using RS485 depending on the sending and receiving timing
with the other device.
*3: We cannot specify what other device you should use; therefore, please test it using the actual equipment
before using.
*4: Available for models equipped with on RS232C port.
◎: Direct connection is possible to the CPU unit of the PLC.
○: Connection is possible using the communications unit or a signal conversion cable, etc.
(Example: The QJ71C24N or QJ71C24N-R2 calculator link unit is required when using the Mitsubishi Q
Series.)
×: Connection is not possible
Blank: Not evaluated.
Refer to the “Technical Support Page” of our website for details, including the latest version of Terminal
GTWIN, usable devices and addresses.
C200HG-CPU43(-Z)
◎
C200HG-CPU63(-Z)
◎
C200HX-CPU44(-Z)
◎
C200HX-CPU64(-Z)
◎
C200HX-CPU65-Z
◎
C200HX-CPU85-Z
◎
CV series
CV500
◎
CV1000
◎
CVM1
◎
GTseries u
PART NUMBER LIST
FP2 / FP2SH COM port, CCU (Computer
Communication Unit)
Mitsubishi Electric FX series
Our FP series*1
Mitsubishi Electric FX series
Our FP series*1
5 V DC and RS232C
5 V DC and RS422 / RS485
24 V DC and RS232C
24 V DC and RS422 / RS485
24 V DC and RS232C
Part No.: AIP81842, PLC connection cable (2 m 6.562 ft), 9-pin D-SUB connector — 6 single wires
Part No.: AIGT8175, PLC connection cable (5 m 16.4 ft), 8-pin mini DIN connector — 4 single wires + shielding wire
Part No.: AIGT8162, PLC connection cable (2 m 6.562 ft), 5-pin mini DIN connector — 3 single wires + shielding wire
Part No.: AIGT8152*, PLC connection cable (2 m 6.562 ft), 8-pin mini DIN connector — 6 single wires + shielding wire
*1: The FP7 series PLC can be connected using commercially available single wire cables.
AIGT8165 (5 m 16.404 ft) and AIGT8160 (10 m 32.808 ft) are also available.
Part No.: AIGT8142*, PLC connection cable (2 m 6.562 ft), 5-pin mini DIN connector — 4 single wires + shielding wire
(GT side) (PLC side)
PLCConnection cable
Power supply and
communication port
Cables PLC connection cable
19
18
Main Unit and Tool Software
Product name
Description
Part No.
LCD Screen
size
Power
supply
Communication
port
Color of front panel SD memory
card slot
GT03M-E TFT monochrome
LCD
3.5 inch
24 V DC
RS232C Silver Not available AIG03MQ03DE
RS422 / RS485 AIG03MQ05DE
GT03T-E TFT color LCD RS232C Silver Available AIG03TQ13DE
RS422 / RS485 AIG03TQ15DE
GT32M-E TFT monochrome
LCD
5.7 inch
RS232C Silver Available AIG32MQ03DE
RS422 / RS485 AIG32MQ05DE
GT32T-E TFT color LCD RS232C Silver Available AIG32TQ03DE
RS422 / RS485 AIG32TQ05DE
GT02L
STN monochrome LCD
(white backlight)
3.7 inch 5 V DC RS232C Pure black Not available AIG02LQ02D
RS422 / RS485 Hairline silver AIG02LQ04D
GT02M
STN monochrome
LCD
white / pink / red
backlight
3.8 inch
5 V DC
RS232C Pure black
Not available
AIG02MQ02D
Hairline silver AIG02MQ03D
RS422 / RS485 Pure black AIG02MQ04D
Hairline silver AIG02MQ05D
24 V DC
RS232C Pure black AIG02MQ12D
Hairline silver AIG02MQ13D
RS422 / RS485 Pure black AIG02MQ14D
Hairline silver AIG02MQ15D
RS232C Pure black
Available
AIG02MQ22D
Hairline silver AIG02MQ23D
RS422 / RS485 Pure black AIG02MQ24D
Hairline silver AIG02MQ25D
GT02G
STN monochrome
LCD
green / orange /
red backlight
3.8 inch
5 V DC
RS232C Pure black
Not available
AIG02GQ02D
Hairline silver AIG02GQ03D
RS422 / RS485 Pure black AIG02GQ04D
Hairline silver AIG02GQ05D
24 V DC
RS232C Pure black AIG02GQ12D
Hairline silver AIG02GQ13D
RS422 / RS485 Pure black AIG02GQ14D
Hairline silver AIG02GQ15D
RS232C Pure black
Available
AIG02GQ22D
Hairline silver AIG02GQ23D
RS422 / RS485 Pure black AIG02GQ24D
Hairline silver AIG02GQ25D
GT05M
STN monochrome
LCD
white / pink / red
backlight
3.5 inch 24 V DC
RS232C Pure black Available AIG05MQ02D
Hairline silver AIG05MQ03D
RS422 / RS485 Pure black Available AIG05MQ04D
Hairline silver AIG05MQ05D
GT05G
STN monochrome
LCD
green / orange /
red backlight
3.5 inch 24 V DC
RS232C Pure black Available AIG05GQ02D
Hairline silver AIG05GQ03D
RS422 / RS485 Pure black Available AIG05GQ04D
Hairline silver AIG05GQ05D
GT05S TFT color LCD 3.5 inch 24 V DC
RS232C Pure black Available AIG05SQ02D
Hairline silver AIG05SQ03D
RS422 / RS485 Pure black Available AIG05SQ04D
Hairline silver AIG05SQ05D
GT12M
STN monochrome
LCD
white / pink / red
backlight
4.6 inch 24 V DC
RS232C Pure black Not available AIG12MQ02D
Hairline silver AIG12MQ03D
RS422 / RS485 Pure black Not available AIG12MQ04D
Hairline silver AIG12MQ05D
RS232C Pure black Available AIG12MQ12D
Hairline silver AIG12MQ13D
RS422 / RS485 Pure black Available AIG12MQ14D
Hairline silver AIG12MQ15D
( )
( )
( )
( )
( )
PART NUMBER LIST
FP2 / FP2SH COM port, CCU (Computer
Communication Unit)
Mitsubishi Electric FX series
Our FP series*1
Mitsubishi Electric FX series
Our FP series*1
5 V DC and RS232C
5 V DC and RS422 / RS485
24 V DC and RS232C
24 V DC and RS422 / RS485
24 V DC and RS232C
Part No.: AIP81842, PLC connection cable (2 m 6.562 ft), 9-pin D-SUB connector — 6 single wires
Part No.: AIGT8175, PLC connection cable (5 m 16.4 ft), 8-pin mini DIN connector — 4 single wires + shielding wire
Part No.: AIGT8162, PLC connection cable (2 m 6.562 ft), 5-pin mini DIN connector — 3 single wires + shielding wire
Part No.: AIGT8152*, PLC connection cable (2 m 6.562 ft), 8-pin mini DIN connector — 6 single wires + shielding wire
*1: The FP7 series PLC can be connected using commercially available single wire cables.
AIGT8165 (5 m 16.404 ft) and AIGT8160 (10 m 32.808 ft) are also available.
Part No.: AIGT8142*, PLC connection cable (2 m 6.562 ft), 5-pin mini DIN connector — 4 single wires + shielding wire
(GT side) (PLC side)
PLCConnection cable
Power supply and
communication port
Cables PLC connection cable
19
18
Main Unit and Tool Software
Product name
Description
Part No.
LCD Screen
size
Power
supply
Communication
port
Color of front panel SD memory
card slot
GT12G
STN monochrome
LCD
white / pink / red
backlight
4.6 inch 24 V DC
RS232C Pure black Not available AIG12GQ02D
Hairline silver AIG12GQ03D
RS422 / RS485 Pure black Not available AIG12GQ04D
Hairline silver AIG12GQ05D
RS232C Pure black Available AIG12GQ12D
Hairline silver AIG12GQ13D
RS422 / RS485 Pure black Available AIG12GQ14D
Hairline silver AIG12GQ15D
GT32M STN monochrome
LCD 5.7 inch 24 V DC
RS232C Pure black Available AIG32MQ02D
Hairline silver AIG32MQ03D
RS422 / RS485 Pure black Available AIG32MQ04D
Hairline silver AIG32MQ05D
GT32T0 TFT color LCD 5.5 inch 24 V DC
RS232C Pure black Available AIG32TQ02D
Hairline silver AIG32TQ03D
RS422 / RS485 Pure black Available AIG32TQ04D
Hairline silver AIG32TQ05D
GT32T1 TFT color LCD 5.5 inch 24 V DC
RS232C Pure black Available AIG32TQ12D
Hairline silver AIG32TQ13D
RS422 / RS485 Pure black Available AIG32TQ14D
Hairline silver AIG32TQ15D
Terminal GTWIN Ver.2 Japanese version Terminal GTWIN CD-ROM AIGT8000V2
English version Terminal GTWIN CD-ROM AIGT8001V2
Terminal GTWIN Ver.2
Upgrade version *1
Japanese version Terminal GTWIN CD-ROM AIGT8000V2R
English version Terminal GTWIN CD-ROM AIGT8001V2R
*1: For upgrading Terminal GTWIN Ver. 1 to Ver. 2.
( )
GTseries ‘ Q©u§m
PART NUMBER LIST
Options
■GT05 / GT32 / GT32-E
mounting parts
5 sets of mounting parts
(2 parts / set)
Package includes one set.
■GT02 / GT03-E /
GT05 / GT12 /
GT32 /GT32-E
backup battery
■Spare connector
5 connectors for
communication and power
supply in a set
Package includes one set.
■Panel face protection
sheets
10 sheets in a set (option)
■Waterproof packing
Waterproof packing (for
replacement), 10 pieces in a set
Package includes one piece.
■GT02 / GT02L / GT03-E /
GT12 mounting parts
5 sets of mounting parts
(4 parts / set)
Package includes one set.
Part No.: AIG12830
* The waterproof packing for GT02(L)
is different from the GT02L main unit
accessory.
SPECIFICATIONS
Part No.: AIGT084 Part No.: AFPX-BATT
For GT02L / GT02
For GT05
For GT12
For GT32
AIG02800
AIG05800
AIG12800
AIG32800
Part No.:
Part No.:
Part No.:
Part No.:
For GT02L / GT02
For GT03-E
For GT05
For GT12
For GT32
For GT32-E
AIG02810
AIG03810E
AIG05810
AIG12810
AIG32810
AIG32810E
Part No.:
Part No.:
Part No.:
Part No.:
Part No.:
Part No.:
For GT05
Part No.: AIGT28321
For GT32 / GT32-E
Part No.: AIG32830
21
20
GTseries
PART NUMBER LIST
Options
■GT05 / GT32 / GT32-E
mounting parts
5 sets of mounting parts
(2 parts / set)
Package includes one set.
■GT02 / GT03-E /
GT05 / GT12 /
GT32 /GT32-E
backup battery
■Spare connector
5 connectors for
communication and power
supply in a set
Package includes one set.
■Panel face protection
sheets
10 sheets in a set (option)
■Waterproof packing
Waterproof packing (for
replacement), 10 pieces in a set
Package includes one piece.
■GT02 / GT02L / GT03-E /
GT12 mounting parts
5 sets of mounting parts
(4 parts / set)
Package includes one set.
Part No.: AIG12830
* The waterproof packing for GT02(L)
is different from the GT02L main unit
accessory.
SPECIFICATIONS
Part No.: AIGT084 Part No.: AFPX-BATT
For GT02L / GT02
For GT05
For GT12
For GT32
AIG02800
AIG05800
AIG12800
AIG32800
Part No.:
Part No.:
Part No.:
Part No.:
For GT02L / GT02
For GT03-E
For GT05
For GT12
For GT32
For GT32-E
AIG02810
AIG03810E
AIG05810
AIG12810
AIG32810
AIG32810E
Part No.:
Part No.:
Part No.:
Part No.:
Part No.:
Part No.:
For GT05
Part No.: AIGT28321
For GT32 / GT32-E
Part No.: AIG32830
21
20
Item GT03M-E GT03T-E GT32M-E GT32T-E
RS232C RS422 / RS485 RS232C RS422 / RS485 RS232C RS422 / RS485 RS232C RS422 / RS485
Power supply 24 V DC
Operating voltage range 21.6 to 26.4 V DC
Power consumption 1.9 W or less 3.1 W or less 4.8 W or less 7.2 W or less
Power supply unit isolation method Transformer isolation
Ambient temperature −20 to +60 °C −4 to +140 °F (Note 1)
Ambient humidity 10 to 90 %RH (at +25 °C +77 °F), No condensation
Storage temperature −20 to +60 °C −4 to +140 °F
Storage humidity 10 to 90 %RH (at +25 °C +77 °F), No condensation
Vibration resistance 5 to 8.4 Hz, amplitude 3.5 mm 0.138 in, 8.4 to 150 Hz, acceleration 9.8 m/s2, 10 sweeps each in X, Y and Z directions (1 octave / min.)
Shock resistance 147 m/s2, 3 times in each of the X, Y and Z directions
Superposed noise suppression 1,000 V [P-P] or more, pulse width of 50 ns, 1 μs between power supply terminals (by a noise simulator)
Environmental resistance IP67 (in the initial stages), Dust-proof and drip-proof from the front of the panel only (Rubber packing is attached to the panel contact surface.) (Note 2)
Weight 170 g approx. 470 g approx.
Display
Display device TFT monochrome LCD TFT color LCD TFT monochrome LCD TFT color LCD
Resolution 320 (W) × 240 (H) dots
Display color 2 colors (black / white, 16-gray scale) 4,096 colors 2 colors (black / white, 16-gray scale) 4,096 colors
Displayable area 70.6 (W) × 52.9
（H）
mm 2.780 (W) × 2.083 (H) in 115.2 (W) × 86.4 (H) mm 4.535 (W) × 3.402 (H) in
Backlight White LED
Functions
Font types Fixed (GTWIN) : 8 × 8, 16 × 8, and 16 × 16 dots, Characters can be displayed in the 1, 2, 4, or 8 times width or height
True Type (GTWIN): 10 to 240 dots, Windows®: 10 to 240 dots
Languages Japanese, English, Simplified Chinese, Traditional Chinese, Korean, German, Italian, Spanish, French, Turkish, Russian and Vietnames
Graphics Straight lines, Continuous straight lines, Squares, Circles, Ovals, Arcs, Elliptic arcs, Fan shapes, Elliptic fan shapes, Beveled squares, and Bitmaps
Number of screens (Note 3)
230 screens approx. 180 screens approx.
Screen setting No. Base screens: No. 0 to 3FF, Key board screens: No. 0 to 7, Login screens: No. 0 to F
Part functions Messages, Lamps, Switches, Function switches, Data, Bar graphs, Clocks, Keyboards, Line graphs, Alarm list, Alarm record, and Custom parts
(messages, lamps, switches)
Other functions Recipe, Flow display, Write device, Multiple PLC connection, FP monitor, Language switching, GT link, Operation security, Data logging, and SD recipe
(Note 4)
Clock function Displayed by referencing PLC clock Provided with a built-in clock. (Can also refer to and display a PLC clock.) * Buy the backup battery (AFPX-BATT).
Backlight brightness adjustment
Can be set on the menu screen, via the GT configuration screen of GTWIN, or via PLC.
Contrast adjustment Not adjustable
Buzzer Installed
Automatic communication settings
The communication speed (baud rate) is automatically changed if there is no response from the target equipment.
Through function GT connected between PC and PLC allows PLC to be debugged without a direct connection to a PC.
Screen creation Dedicated software should be used. Applicable OS: Windows® 2000 / XP / Vista / 7 (Note 5)
Touch key resolution Free layout (8 dots min.)
Touch key operation force 0.8 N or less
Touch key life 1 million operations or more (at +25 °C +77 °F)
COM. port
Communication standard
Conforms to RS232C
Conforms to RS422 / RS485
Conforms to RS232C
Conforms to RS422 / RS485
Conforms to RS232C
Conforms to RS422 / RS485
Conforms to RS232C
Conforms to RS422 / RS485
External communication
conditions
Baud rate: 9,600 bps, 19,200 bps, 38,400 bps, 57,600 bps, and 115,200 bps
Data bits: 7 or 8 bits, Parity: None, Odd, Even, Stop bits: 1 bit
Protocol
Our FP series supported, General-purpose serial interface supported, and Other companies' PLC supported (Refer to the "PLC COMPATIBILITY TABLE" on p.17 for manufacturers and models.)
Connector Connector terminal block (8 pins)
Screen
data
transfer
interface
Communication standard
USB1.1
Communication conditions with PC
Protocol Our dedicated protocol
Connector USB Mini B USB TYPE-B
Ethernet port (Note 6)
User’s
memory
Memory F-ROM
Capacity 6 Mbyte 12 Mbyte
Memory
backup
Memory SRAM
Backup battery Lithium battery (replaceable) AFPX-BATT (Does not include with product.)
Conformance to the UL / cUL
standards
UL / cUL file No. E96300
UL standard No. UL508
Notes: 1) Please use within a temperature range of - 20 to + 55 °C - 4 to + 131 °F when horizontally installed and vertically installed in
a portrait orientation and when using battery.
2) This protective structure condition applies to the front surface of the installed panel. This condition does not guarantee
usage in all environments provided by users. When reattaching the panel, replace the waterproof packing.
3) The number of screens that can be registered varies according to the registered contents.
4) The data logging and SD recipe functions are available with only models equipped with an SD / SDHC memory card slot.
5) The 64-bit version is not supported except for Windows® 7.
6) Simultaneous USB and Ethernet communications are not possible.
GTseries
SPECIFICATIONS
23
22
Item GT02L GT02 GT05M / GT05G GT05S
5 V / RS232C
5 V / RS422 / RS485
5 V / RS232C 5 V / RS422 /
RS485
24 V / RS232C 24 V / RS422 /
RS485
RS232C RS422 / RS485 RS232C RS422 / RS485
Power supply 5 V DC 24 V DC
Operating voltage range 4.5 to 5.5 V DC 21.6 to 26.4 V DC
Power consumption 1 W or less 1.9 W or less 2.4 W or less 3.6 W or less
Power supply unit isolation method Transformer isolation
Ambient temperature 0 to +50 °C +32 to +122 °F
Ambient humidity 20 to 85 % RH (at +25 °C +77 °F), No condensation
Storage temperature –20 to +60 °C –4 to +140 °F
Storage humidity 10 to 85 % RH (at +25 °C +77 °F), No condensation
Vibration resistance 5 to 8.4 Hz amplitude: 3.5 mm 0.138 in, 8.4 to 150 Hz acceleration 9.8 m/s2,
10 sweeps each in X, Y and Z directions (1 octave/min.)
10 to 55 Hz (1 minute cycle): Double amplitude: 0.75 mm 0.030 in,
10 minutes in each of the X, Y, and Z directions
Shock resistance 147 m/s2, 3 times in each of the X, Y and Z directions 98 m/s2 or more, 4 times in each of the X, Y, and Z directions
Superposed noise suppression 1,000 V [P-P] or more, pulse width of 50 ns, 1 µs between power supply terminals (by a noise simulator)
Environmental resistance IP65 (in the initial stages) (Note 1) IP67 (in the initial stages) (Note 1) IP65 (in the initial stages) (Note 1)
Weight 150 g approx. 170 g approx. 230 g approx.
Display
Display device STN monochrome LCD TFT color LCD
Resolution 160 (W) × 64 (H) dots 240 (W) × 96 (H) dots 320 (W) × 240 (H) dots
Display color 2 colors (black / white) 4,096 colors
Displayable area
88.0 (W) × 35.2 (H) mm 3.465 (W) × 1.386 (H) in 88.5 (W) × 35.4 (H) mm 3.484 (W) × 1.394 (H) in
71.0 (W) × 53.3 (H) mm 2.795 (W) × 2.098 (H) in
Backlight White LED
GT02M: 3-color LED (white / pink / red)
GT02G: 3-color LED (green / orange / red)
GT05M: 3-color LED (white / pink / red)
GT05G: 3-color LED (green / orange / red)
White LED
Functions
Font types
Fixed (GTWIN) : 8 × 8, 16 × 8, and 16 × 16 dots,
Characters can be displayed in the 1, 2, 4, or
8 times width or height,
TrueType (GTWIN): 10 to 64 dots
Windows
®
: 10 to 64 dots
Fixed (GTWIN) : 8 × 8, 16 × 8, and 16 × 16 dots
Characters can be displayed in the 1, 2, 4, or
8 times width or height.
TrueType (GTWIN): 10 to 96 dots
Fixed (GTWIN) : 8 × 8, 16 × 8, and 16 × 16 dots,
Characters can be displayed in the 1, 2, 4, or 8 times width or height.
TrueType (GTWIN): 10 to 240 dots, Windows®: 10 to 240 dots
Languages Japanese, English, Simplified Chinese, Traditional Chinese, Korean, German, Italian, Spanish, French, Turkish, Russian and Vietnames
Graphics Straight lines, Continuous straight lines, Squares, Circles, Ovals, Arcs, Elliptic arcs, Fan shapes, Elliptic fan shapes, Beveled squares and Bitmaps
Number of screens (Note 2)
80 screens approx. 250 screens approx. 240 screens approx. 180 screens approx.
Screen setting No. No. 0 to 3FF
Part functions
Messages, Lamps, Switches, Function switches, Data, Bar graphs, Clocks, Keyboards, Line graphs, Alarm list, and Custom parts (messages, lamps, switches)
Other functions Recipe, Flow display, Write device, Language switching, GT link, Operation security, Data logging and SD recipe (Note 3)
Clock function Displayed by referencing PLC clock
Provided with a built-in clock. (Can also refer to and display a PLC clock.) *Buy the backup battery (AFPX-BATT).
Note: For the GT02 series, only GT02M2 and GT02G2 have a built-in clock.
Contrast adjustment Contrast can be adjusted by using the touch panel. Not adjustable
Buzzer Installed
Automatic communication settings
The communication speed (baud rate) is automatically changed if there is no response from the target equipment.
Through function GT connected between PC and PLC allows PLC to be debugged without a direct connection to a PC.
Screen creation Dedicated software should be used. Applicable OS: Windows® 2000 / XP / Vista / 7 (Note 6)
Touch key resolution Free layout (8 dots min.)
Touch key operation force 0.8 N or less
Touch key life 1 million operations or more (at +25 °C +77 °F)
COM. port
Communication standard
Conforms to RS232C
Conforms to RS422 / RS485
Conforms to
RS232C
Conforms to
RS422 / RS485
Conforms to
RS232C
Conforms to
RS422 / RS485
Conforms to RS232C
Conforms to RS422 / RS485
Conforms to RS232C
Conforms to RS422 / RS485
External communication
conditions
Baud rate: 9,600 bps, 19,200 bps, 38,400 bps, 57,600 bps, and 115,200 bps
Data bits: 7 or 8 bits, Parity: None, Odd, Even, Stop bits: 1 bit
Protocol
Our FP series supported, General-purpose serial interface supported, Other companies' PLC supported (Refer to the “PLC COMPATIBILITY TABLE” on p.17 for manufacturers and models.)
Connector Connector terminal block (8 pins)
Screen
data
transfer
interface
Communication standard
USB1.1
Communication
conditions with PC
Protocol Our dedicated protocol
Connector USB Mini B USB TYPE-B
Ethernet port (Note 4)
User’s
memory
Memory F-ROM
Capacity 704 Kbyte 2 Mbyte 12 Mbyte
Memory
backup
Memory SRAM (Note 5)
Backup battery Lithium battery (replaceable) AFPX-BATT (Does not include with product.) (Note 5)
Conformance to the UL / cUL
standards
UL / cUL file No. E96300
UL standard No. UL508
Notes: 1) This protective structure condition applies to the front surface of the installed panel. This condition does not guarantee
usage in all environments provided by users. When reattaching the panel, replace the waterproof packing.
2) The number of screens that can be registered varies according to the registered contents.
3) The data logging and SD recipe functions are available with only models equipped with an SD / SDHC memory card slot.
4) Simultaneous USB and Ethernet communications are not possible.
5) Among GT02 series, available for GT02M2 and GT02G2 only.
6) The 64-bit version is not supported except for Windows® 7.
SPECIFICATIONS
23
22
Item GT12 GT32M GT32T0 GT32T1
RS232C RS422 / RS485 RS232C RS422 / RS485 RS232C RS422 / RS485 RS232C RS422 / RS485
Power supply 24 V DC
Operating voltage range 21.6 to 26.4 V DC
Power consumption 1.7 W or less 10 W or less 12 W or less
Power supply unit isolation method Transformer isolation
Ambient temperature 0 to +50 °C +32 to +122 °F 0 to +50 °C +32 to +122 °F (Note 5)
Ambient humidity 20 to 85 % RH (at +25 °C +77 °F), No condensation
Storage temperature –20 to +60 °C –4 to +140 °F
Storage humidity 10 to 85 % RH (at +25 °C +77 °F), No condensation
Vibration resistance
5 to 9 Hz amplitude: 3.5 mm 0.138 in, 9 to
150 Hz acceleration 9.8 m/s
2
, 10 sweeps
each in X, Y and Z directions (1 octave/min.)
10 to 55 Hz (1 minute cycle): Double amplitude: 0.75 mm 0.030 in, 10 minutes in each of the X, Y, and Z directions
Shock resistance
147 m/s2, 3 times in each of the X, Y and Z directions
98 m/s2 or more, 4 times in each of the X, Y, and Z directions
Superposed noise suppression 1,000 V [P-P] or more, pulse width of 50 ns, 1 µs between power supply terminals (by a noise simulator)
Environmental resistance IP67 (in the initial stages) (Note 1) IP65 (in the initial stages) (Note 1)
Weight 240 g approx. 500 g approx. 470 g approx. 480 g approx.
Display
Display device STN monochrome LCD TFT color LCD
Resolution 320 (W) × 120 (H) dots 320 (W) × 240 (H) dots
Display color 2 colors (black / white, 8-gray scale) 2 colors (blue / white) 4,096 colors
Displayable area
108.8 (W) × 40.8 (H) mm 4.283 (W) × 1.606 (H) in
113.2 (W) × 86.4 (H) mm 4.457 (W) × 3.402 (H) in
110.8 (W) × 83.6 (H) mm 4.362 (W) × 3.291 (H) in
Backlight
GT12M: 3-color LED (white / pink / red)
GT12G: 3-color LED (green / orange / red)
CFL *Not replaceable.
Average life for backlight; GT32M: 75,000 hours (at +25 °C +77 °F),
GT32T: 50,000 hours (at +25 °C +77 °F)
Functions
Font types
Fixed (GTWIN) : 8 × 8, 16 × 8, and
16 × 16 dots
Characters can be displayed in the
1, 2, 4, or 8 times width or height.
True Type (GTWIN): 10 to 120 dots
Fixed (GTWIN) : 8 × 8, 16 × 8, and 16 × 16 dots,
Characters can be displayed in the 1, 2, 4, or 8 times width or height.
True Type (GTWIN): 10 to 240 dots, Windows®: 10 to 240 dots
Languages Japanese, English, Simplified Chinese, Traditional Chinese, Korean, German, Italian, Spanish, French, Turkish, Russian and Vietnames
Graphics Straight lines, Continuous straight lines, Squares, Circles, Ovals, Arcs, Elliptic arcs, Fan shapes, Elliptic fan shapes, Beveled squares and Bitmaps
Number of screens (Note 2)
2-gray scale: 250 screens approx.
8-gray scale: 200 screens approx. 240 screens approx. 180 screens approx.
Screen setting No. No. 0 to 3FF
Part functions
Messages, Lamps, Switches, Function switches, Data, Bar graphs, Clocks, Keyboards, Line graphs, Alarm list, and Custom parts (messages, lamps, switches)
Other functions Recipe, Flow display, Write device, Multiple PLC connection, FP monitor, Language switching, GT link, Operation security, Data logging and SD recipe
(Note 3) Sound output (Note 6)
Clock function Provided with a built-in clock. (Can also refer to and display a PLC clock.) *Buy the backup battery (AFPX-BATT).
Contrast adjustment Contrast can be adjusted by using the touch panel. Not adjustable
Buzzer Installed
Automatic communication settings
The communication speed (baud rate) is automatically changed if there is no response from the target equipment.
Through function GT connected between a PC and PLC allows the PLC to be debugged without a direct connection with the PC.
Screen creation Dedicated software should be used. Applicable OS: Windows® 2000 / XP / Vista / 7 (Note 9)
Touch key resolution Free layout (8 dots min.)
Touch key operation force 0.8 N or less
Touch key life 1 million operations or more (at +25 °C +77 °F)
COM. port
Communication standard
Conforms to RS232C
Conforms to RS422 / RS485
Conforms to RS232C
Conforms to RS422 / RS485
Conforms to RS232C
Conforms to RS422 / RS485
Conforms to RS232C
Conforms to RS422 / RS485
External communication
conditions
Baud rate: 9,600 bps, 19,200 bps, 38,400 bps, 57,600 bps and 115,200 bps
Data bits: 7 or 8 bits, Parity: None, Odd, Even, Stop bits: 1 bit
Protocol
Our FP series supported, General-purpose serial interface supported, Other companies' PLC supported (Refer to the “PLC COMPATIBILITY TABLE” on p.17 for manufacturers and models.)
Connector Connector terminal block (8 pins)
Screen
data
transfer
interface
Communication standard
USB1.1
Communication
conditions with PC
Protocol Our dedicated protocol
Connector USB Mini B USB TYPE-B
Ethernet port (Note 4)
Available (100BASE-TX, 10BASE-T) (Note 7, 8)
User’s
memory
Memory F-ROM
Capacity 2 Mbyte 2 Mbyte 12 Mbyte (Ver.1.10 or later)
Memory
backup
Memory SRAM
Backup battery Lithium battery (replaceable) AFPX-BATT (Does not include with product.)
Conformance to the UL / cUL
standards
UL / cUL file No. E96300
UL standard No. UL508
Notes: 1) This protective structure condition applies to the front
surface of the installed panel. This condition does not
guarantee usage in all environments provided by users.
When reattaching the panel, replace the waterproof
packing.
2) The number of screens that can be registered varies
according to the registered contents.
3) The data logging and SD recipe functions are available
with only models equipped with an SD / SDHC memory
card slot.
4) Simultaneous USB and Ethernet communications are
not possible.
5) Please use within a temperature range of 0 to +40 °C +32 to
+104°F when horizontally installed and vertically installed in a
portrait orientation.
6) WAV format (PCM, 8 kHz sampling rate, 16 bits, monaural),
Maximum sound data capacity: 512 Kbyte (30 sec, approx.),
Maximum registrable number of sound data items: 128
7) The unit caries out serial communication data processing at
115.2 kbits / s.
8) Communications with external equipment (PLC) are not
available.
9) The 64-bit version is not supported except for Windows® 7.
GTseries ‘ Eéuunulém mlmflW m m HUNT” was": mg 54 323 , 5m 72 oz 535 (D‘smiy) mm 5m ‘ ‘ QM m I L “W ,LMEEI ' L—J \
Applicable panel thickness: 1.0 mm to 5.0 mm
0.039 in to 0.197 in
Applicable panel thickness: 1.0 mm to 5.0 mm
0.039 in to 0.197 in
86 3.386
71.4 2.811 (Display)
98 3.858
87.2 3.433
Battery holder and
operation mode switch
Connector for communication
and power supply
miniUSB port
SD
memory
card slot
Connector for communication
and power supply
Operation mode switch
miniUSB port
86 3.386
71.4 2.811 (Display)
98 3.858
87.2 3.433
28
1.102
4
0.157
4
0.157
30
1.181
53.7 2.114
(Display)
53.7 2.114
(Display)
76.2
3.000
76.2
3.000
87.5+1
0
3.445 +0.039
0
76.5 +1
0
3.012 +0.039
0
87.5+1
0
3.445 +0.039
0
76.5 +1
0
3.012 +0.039
0
The CAD data in the dimensions can be downloaded from our website.
Panel cutout
dimensions
Panel cutout
dimensions
GT03T-EGT03M-E
Unit: mm in
DIMENSIONS
Applicable panel thickness: 1.0 mm to 5.0 mm
0.039 in to 0.197 in
GT02
112 4.409
90.5 3.563 (Display)
0.354
9
Panel cutout
dimensions
With the mounting brackets
SD memory
card slot
Battery holder
and operation
mode switch
miniUSB
port
Connector for
communication
and power supply
* The above drawing shows the type
with the SD memory card slot.
GT02L
112 4.409
89.5 3.524 (Display)
1.063
27
0.157
4
Applicable panel thickness: 1.0 mm to 5.0 mm
0.039 in to 0.197 in
67 ±1
2.638 ±0.039
4.134 ±0.039
105 ±1
Panel cutout
dimensions
With the mounting brackets
0.512 0.512
13 13
75
2.953
Operation mode
switch
miniUSB
port
Connector for
communication
and power supply
85
3.346
74
2.913
36.4
1.433
(Display)
1.063
27
0.157
4
37.4
1.472
(Display)
74
2.913
0.512
13 0.512
13
75
2.953
85
3.346
67 ±1
2.638 ±0.039
4.134 ±0.039
105 ±1
GT12
67.0 Applicable panel thickness: 1.0 mm to 5.0 mm
0.039 in to 0.197 in
5.472
41.8 1.646 (Display)
5.433
138
66 2.598
1.181
30
109.8 4.323
(Display)
146 5.748
74 2.913
Panel cutout
dimensions
GT05
Applicable panel thickness: 1.0 mm to 5.0 mm
0.039 in to 0.197 in
85.2
110.0
4.331
72.0 2.835
(Display)
1 0.039
(Packing)
1.173
29.8 0.157
4
3.866
98.2
65.0
2.559
USB
port
Panel cutout
dimensions
SD memory
card slot
Slot for
SD
memory
card
Battery holder and
operation mode switch
Battery holder and
operation mode switch
miniUSB
port
Connector for
communication
and power supply
Connector for
communication
and power supply
+0.039
0
99.2 +1
0
+1
0
3.354 +0.039
0
+0.039
0
139.0 +1
0
+1
0
2.638 +0.039
0
107.4
4.228
84.2
3.315
54.2
2.134
(Display)
92.2
3.630
3.906
0.157
4
GT32 GT32-E
1.539
39.1 0.205
5.2
4.0
0.157
1.539
39.1
Note:
The above drawing shows GT32T1.
GT32T0 and GT32M do not have an
Ethernet port and sound output jack.
The display area of GT32M is
116.2 × 87.4 mm 4.575 × 3.441 in.
65.0
2.559
5.913
150.2
163.2
6.425
111.9 4.406 (Display)
128.8 5.071
118.8 4.677
84.2 3.315 (Display)
163.2
6.425
116.2 4.575 (Display)
5.913
150.2
USB port
Ethernet
port
Applicable panel thickness: 1.0 mm to 5.0 mm
0.039 in to 0.197 in
5.925
119
SD
memory
card slot
USB port
SD
memory
card slot
Panel cutout
dimensions
Applicable panel thickness: 1.0 mm to 5.0 mm
0.039 in to 0.197 in
5.925
119
Panel cutout
dimensions
Battery holder and
operation mode switch
Battery holder and
operation mode switch
Connector for
communication
and power supply
Connector for
communication
and power supply
+0.039
0
150.5 +1
0
+1
0
4.685 +0.039
0
+0.039
0
150.5 +1
0
+1
0
4.685+0.039
0
118.8
4.677
128.8
5.071
87.4
3.441
(Display)
Panasonic Industrial Devices SUNX Co., Ltd.
Global Sales Department
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
ƛTelephone: +81-568-33-7861 ƛFacsimile: +81-568-33-8591
All Rights Reserved ©Panasonic Industrial Devices SUNX Co., Ltd. 2013
2013.10 panasonic.net/id/pidsx/global
No. CE-GT-3-5 October, 2013