EAST1616RGBA3 Datasheet by Everlight Electronics Co Ltd

EVEFILIG-HT AMERICAS DATASHEET
1 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 06-Aug-2014. Issue No: DSE-0009891 Rev.2 www.everlightamericas.com
SMD B
EAST1616RGBA3
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow solder process.
․Multi-color type.
․Pb-free.
․The product itself will remain within RoHS compliant version.
․Compliance with EU REACH.
․Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm).
Description
․The SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density,
reduced storage space and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
EVEFILIG-HT —AMER|CAS
DATASHEET
SMD B
EAST1616RGBA3
2 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date：06-Aug-2014. Issue No: DSE-0009891 Rev.2 www.everlightamericas.com
Device Selection Guide
Code Chip
Materials Emitted Color Resin Color
R6 AlGaInP Brilliant Red
Water Clear
GH InGaN Brilliant Green
BH InGaN Blue
EVEFILIG-HT —AMERICAS
DATASHEET
SMD B
EAST1616RGBA3
3 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date：06-Aug-2014. Issue No: DSE-0009891 Rev.2 www.everlightamericas.com
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Code Rating Unit
Reverse Voltage VR 5 V
Forward Current IF 25 mA
Peak Forward Current
(Duty 1/10 @1KHz) IFP
R6 60
mA
GH 100
BH 100
Power Dissipation Pd
R6 60
mW
GH 95
BH 95
Electrostatic
Discharge(HBM) ESD
R6 2000
V
GH 150
BH 150
Operating Temperature Topr -40 ~ +85
℃
Storage Temperature Tstg -40 ~ +90
℃
Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
EVEFILIG-HT —AMER|CAS
DATASHEET
SMD B
EAST1616RGBA3
4 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date：06-Aug-2014. Issue No: DSE-0009891 Rev.2 www.everlightamericas.com
Electro-Optical Characteristics (Ta=25℃)
Parameter Symbol Code Min. Typ. Max. Unit Condition
Luminous Intensity Iv
R6 18.0 ----- 57.0
mcd
IF=5mA
GH 28.5 112
BH 11.5 28.5
Viewing Angle 2θ1/2 ----- 120 ----- Deg
Peak Wavelength λp
R6 ----- 632 -----
nm
GH ----- 518 -----
BH ----- 468 -----
Dominant
Wavelength
λd
R6 613 ----- 627
nm
GH 520 ----- 530
BH 465 ----- 475
Spectrum Radiation
Bandwidth
△λ
R6 ----- 20 -----
nm
GH -----
35 -----
BH -----
25 -----
Forward Voltage VF
R6 1.7 ----- 2.2
V
GH 2.6 ----- 3.0
BH 2.6 ----- 3.0
Reverse Current IR
R6 10
μA VR=5V
GH 50
BH ----- ----- 50
Note:
1. Tolerance of Luminous Intensity: ±11%
2. Tolerance of Dominant Wavelength: ±1nm
3. Tolerance of Forward Voltage: ±0.1V
EVERLIG‘I-I'I' —AMER|CAS
DATASHEET
SMD B
EAST1616RGBA3
5 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date：06-Aug-2014. Issue No: DSE-0009891 Rev.2 www.everlightamericas.com
R6
Bin Range of Luminous Intensity
Bin Code Min. Max. Unit Condition
M 18.0 28.5
mcd IF=5mA
N 28.5 45.0
P 45.0 57.0
GH
Bin Range of Luminous Intensity
Bin Code Min. Max. Unit Condition
N 28.5 45.0
mcd IF=5mA
P 45.0 72.0
Q 72.0 112
Bin Range Of Forward Voltage
Bin Code Min. Max. Unit Condition
1 2.6 2.8
V IF=5mA
2 2.8 3.0
BH
Bin Range of Luminous Intensity
Bin Code Min. Max. Unit Condition
L 11.5 18.0
mcd IF=5mA
M 18.0 28.5
Bin Range Of Forward Voltage
Bin Code Min. Max. Unit Condition
1 2.6 2.8
V IF=5mA
2 2.8 3.0
Note:
1. Tolerance of Luminous Intensity: ±11%
2. Tolerance of Forward Voltage: ±0.1V
EVEFlLIG-HT AMERICAS
DATASHEET
SMD B
EAST1616RGBA3
6 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date：06-Aug-2014. Issue No: DSE-0009891 Rev.2 www.everlightamericas.com
Typical Electro-Optical Characteristics Curves
R6
Ta=25°C
Forward Voltage V (V)
Relative luminous intensity (%)
-60
Forward Current Derating Curve
Ambient Temperature Ta (°C)
Forward Current F
I (mA)
1
10
-20-40 0 20 60
40 10080
Relative luminous intensity (%)
100
1000
Forward Current
Wavelength λ (nm)
Luminous Intensity vs.
Ambient Temperature
I (mA)
F
Spectrum Distribution Forward Voltage
F
Ta=25°C
Forward Current vs.
10
Relative luminous intensity (%)
1
10
100
1000
Forward Current I (mA)
010110 2
F
Ta=25°C
Luminous Intensity vs.
Forward Current
Ta=25°C
Radiation Diagram
Ambient Temperature Ta (°C)
500
25
0
50
75
100
550 600 650 700 1.2
0
10
20
25
30
40
50
2.82.01.6 2.4 3.0
0
10
0
20
30
25
40
50
40
20 60 10085
70°
0.7
0.5 0.40.10.3 0.2
90°
80°
0.6
1.0
0.9
0.8
0° 10°
40°
60°
50°
30°
20°
EVEFlLIG-HT AMERICAS
DATASHEET
SMD B
EAST1616RGBA3
7 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date：06-Aug-2014. Issue No: DSE-0009891 Rev.2 www.everlightamericas.com
Typical Electro-Optical Characteristics Curves
GH
Relative luminous intensity
Ambient Temperature Ta (°C)
-60
Forward Current Derating Curve
Ambient Temperature Ta (°C)
0
Forward Current
10
0
20
30
25
F
I (mA)
40
50
1
10
40
20 60 10085
-20-40 0 20 60
40 10080
100
%)
(
1000
Luminous Intensity vs.
Ambient Temperature
10
Relative luminous intensity
1
10
100
%)
(
1000
Forward Current
10 10
I (mA)
F
Ta=25°C
Luminous Intensity vs
Forward Current
Ta=25°
%
400
Relative luminous intensity
0
25
75
50
(
100
550
450 500 600
)
Spectrum Distribution
2.6
Forward Current
0
10
25
20
I (mA)
F
40
30
50
Forward Voltage
4.23.43.0 3.8 4.5
Ta=25°C
Forward Current vs.
Radiation Diagram Ta=25°C
Wavelength λ (nm) Forward Voltage V (V)
F
80°
0.20.5 0.10.3
90°
0.4 0.6
10°
0.7
0.8
1.0
0.9
0°
50°
70°
60°
40°
30°
20°
EVEFlLIG-HT AMERICAS
DATASHEET
SMD B
EAST1616RGBA3
8 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date：06-Aug-2014. Issue No: DSE-0009891 Rev.2 www.everlightamericas.com
Typical Electro-Optical Characteristics Curves
BH
25
0
50
75
100 Ta=25°C
Forward Voltage V (V)
Relative luminous intensity (%)
-60
Forward Current Derating Curve
Ambient Temperature Ta (°C)
Forward Current F
I (mA)
1
10
-20-40 0 20 60
40 10080
Relative luminous intensity (%)
100
1000
Forward Current
Wavelength λ (nm)
Luminous Intensity vs.
Ambient Temperature
I (mA)
F
Spectrum Distribution Forward Voltage
F
Ta=25°C
Forward Current vs.
10
Relative luminous intensity (%)
1
10
100
Forward Current I (mA)
10 10
F
Ta=25°C
Luminous Intensity vs.
Forward Current
30°
20°
Ta=25°C
10°0°
Radiation Diagram
40°
60°
50°
90°
80°
0.6
70°
0.20.10.5 0.3 0.4
1.0
0.8
0.9
0.7
Ambient Temperature Ta (°C)
400 550
450 500 600 2.6
0
10
25
20
40
30
50
4.23.43.0 3.8 4.5
1000
12
0
10
0
20
30
25
40
50
40
20 60 10085
EVEFILIG-HT —AMER|CAS Hommmcr‘d so‘dcrmg purl HO'TCH'
DATASHEET
SMD B
EAST1616RGBA3
9 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date：06-Aug-2014. Issue No: DSE-0009891 Rev.2 www.everlightamericas.com
Package Dimension
1.6
1.6
0.55
0.55
0.35
3
2
4
1
21
43
0.8
21
43
0.65±0.1
0.6±0.2
1.4±0.2
0.25±0.1
0.9
2±0.2
Suggested pad dimension is just for reference only.
Please modify the pad dimension based on individual need.
0.4
0.8
1.35
0.35
0.9
1
1.1
0.16
Anode mark
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
EVEFILIG-HT —AMERICAS «=43 A ‘~ 4 / K J / HIHHHIH\HHHI‘WIHHHH\HHH‘H‘HHHHH\HIHI |:|
DATASHEET
SMD B
EAST1616RGBA3
10 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date：06-Aug-2014. Issue No: DSE-0009891 Rev.2 www.everlightamericas.com
Moisture Resistant Packing Materials
Label Explanation
‧CPN: Customer’s Product Number
‧P/N: Product Number
‧QTY: Packing Quantity
‧CAT: Luminous Intensity Rank
‧HUE: Chromaticity Coordinates & Dom. Wavelength Rank
‧REF: Forward Voltage Rank
‧LOT No: Lot Number
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
RoHS
Pb
CPN :
PN : XXXXXXXXXXXXX
XXXXXXXXXXXXX
QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
CAT : XXX
HUE : XXX
REF : XXX
EVERLIGHT
MADE IN TAIWAN
EVEFILIG-HT —AMER|CAS 3:53ch dimcflcr‘ 70 4.0 M: m + / % \ / m / 5% ‘ fl ‘ ‘ U) i i a; (a V E “ RF» // 7 4' <9 :0="" +="" 'w="" (‘1’="" 37*="" (3,="" (a74="" p17‘gh'v="">
DATASHEET
SMD B
EAST1616RGBA3
11 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date：06-Aug-2014. Issue No: DSE-0009891 Rev.2 www.everlightamericas.com
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
3
2
4
1
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label Desiccant Label
Aluminum moisture-proof bag
EVEFILIG-HT AMERICAS
DATASHEET
SMD B
EAST1616RGBA3
12 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date：06-Aug-2014. Issue No: DSE-0009891 Rev.2 www.everlightamericas.com
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
Pre-heating
150~200°C
60~120sec.
Above 217°C
60~150sec.
260°C Max.
10sec. Max.
6°C/sec.Max.
Above255°C
30sec.Max.
3°C/sec.Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the
soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because
the damage of the product is often started at the time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering
iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will
not be damaged by repairing.
EVEFILIG-HT —AMER|CAS
DATASHEET
SMD B
EAST1616RGBA3
13 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date：06-Aug-2014. Issue No: DSE-0009891 Rev.2 www.everlightamericas.com
Application Restrictions
High reliability applications such as military/aerospace, automotive safety/security systems,
and medical equipment may require different product. If you have any concerns, please contact
Everlight Americas before using this product in your application. This specification guarantees the quality
and performance of the product as an individual component. Do not use this product beyond the
specification described in this document.