SA-90 Series Assembly Instr Datasheet by Jonard Tools

(Q JONARDTOOLS”
134 Marbledale Road, Tuckahoe, NY 10707 | Tel 914.793.0700 | Fax 914.793.4527 | jonard.com
SA-90 SERIES ARM-MOUNTED FUME ABSORBER
SAK-90 CONVERSION KIT
ASSEMBLY INSTRUCTIONS
Congratulations on your purchase of our SA-90/SAK-90 Fume Absorber System. This unit has been tested and
inspected by OK Industries prior to shipment. We appreciate your comments and suggestions. Please feel free to
contact us directly:
PLEASE FOLLOW
THESE INSTRUCTIONS:
SA-9
SAK-90
(1) SA-90 SERIES - Please refer to the SA-9 manual
contained in the SA-9 FUME ABSORBER box. OMIT
STEP #1.
(1a) SAK-90Removetheexhaustairdeflectorfrom
the rear of your SA-9 series FUME ABSORBER.
(2) Using the thumb-screws provided with the SA-9 mount the SA-9 to the “U” shaped bracket.
IMPORTANT: YOU MUST ROUTE THE POWER CORD BELOW THE “U” SHAPED BRACKET
(3) Use the two cable guides provided to hide the power cord along the outside sections of the arm
assembly. Simply push the guides over one of the arms on the SAK-90.
Be sure to run power cord before pushing guide on to the arm.
(4) Clamp the arm mounting bracket in a suitable location on the workbench, insert the arm
assembly and connect the main power cord.