Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LD1117ASTR IC REG LINEAR POS ADJ 1A SOT223 STMicroelectronics	14,288 In Stock	1 : ¥7.06000 Cut Tape (CT) 2,500 : ¥2.99720 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	15V	1.25V	15V	1.3V @ 1A	1A	5 mA	-	80dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223
XC6216C202PR-G IC REG LIN POS ADJ 100MA SOT89-5 Torex Semiconductor Ltd	581 In Stock	1 : ¥8.78000 Cut Tape (CT) 1,000 : ¥3.97989 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	28V	2V	25.4V	2.6V @ 100mA	100mA	9 µA	-	30dB (1kHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	SOT-89-5/6	SOT-89-5
ADP7118AUJZ-3.3-R7 IC REG LIN 3.3V 200MA TSOT23-5 Analog Devices Inc.	17,417 In Stock	1 : ¥22.82000 Cut Tape (CT) 3,000 : ¥11.46873 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	20V	3.3V	-	0.42V @ 200mA	200mA	140 µA	320 µA	88dB ~ 50dB (10kHz ~ 1MHz)	Enable, Soft Start	Over Current, Over Temperature	-40°C ~ 125°C (TA)	Surface Mount	SOT-23-5 Thin, TSOT-23-5	TSOT-23-5

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.