Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LT3093IMSE#PBF IC REG LIN NEG ADJ 200MA 12MSOP Analog Devices Inc.	730 In Stock	1 : ¥58.04000 Tube	-	Tube	Active	Negative	Adjustable	1	-20V	0V	-19.5V	0.3V @ 200mA	200mA	10 µA	80 mA	73dB (1MHz)	Current Limit, Enable	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C (TA)	Surface Mount	12-TSSOP (0.118", 3.00mm Width) Exposed Pad	12-MSOP-EP
LT3045EDD-1#PBF IC REG LIN POS PROG 500MA 12DFN Analog Devices Inc.	2,161 In Stock	1 : ¥66.50000 Tube	-	Tube	Active	Positive	Adjustable	1	20V	0V	15V	0.45V @ 500mA	500mA	20 µA	25 mA	117dB ~ 53dB (120Hz ~ 10MHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	Surface Mount	12-WFDFN Exposed Pad	12-DFN (3x3)
LP3985IM5-3.0/NOPB IC REG LINEAR 3V 150MA SOT23-5 Texas Instruments	42,949 In Stock	1 : ¥5.42000 Cut Tape (CT) 1,000 : ¥2.53480 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	3V	-	0.1V @ 150mA	150mA	150 µA	250 µA	50dB ~ 40dB (1kHz ~ 10kHz)	Enable	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	SC-74A, SOT-753	SOT-23-5

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.