Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

NCP718BSN330T1G IC REG LIN 3.3V 300MA TSOT23-5 onsemi	47,853 In Stock	1 : ¥4.68000 Cut Tape (CT) 3,000 : ¥1.67903 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	24V	3.3V	-	0.44V @ 300mA	300mA	8 µA	300 µA	60dB (1kHz)	Soft Start	Over Current, Over Temperature	-40°C ~ 125°C (TJ)	Surface Mount	SOT-23-5 Thin, TSOT-23-5	TSOT-23-5
AP2127N-1.8TRG1 IC REG LINEAR 1.8V 300MA SOT23 Diodes Incorporated	6,181 In Stock 39,000 Factory	1 : ¥3.37000 Cut Tape (CT) 3,000 : ¥0.74623 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	1.8V	-	0.7V @ 300mA	300mA	90 µA	-	68dB ~ 54dB (100Hz ~ 10kHz)	-	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	TO-236-3, SC-59, SOT-23-3	SOT-23-3
AP7115-28SEG-7 IC REG LINEAR 2.8V 150MA SOT353 Diodes Incorporated	7,684 In Stock	1 : ¥3.28000 Cut Tape (CT) 3,000 : ¥0.93442 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	2.8V	-	0.3V @ 150mA	150mA	80 µA	-	70dB (1kHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	5-TSSOP, SC-70-5, SOT-353	SOT-353

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.