Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

MCP1702T-3302E/CB IC REG LIN 3.3V 250MA SOT23A-3 Microchip Technology	22,854 In Stock	1 : ¥5.34000 Cut Tape (CT) 3,000 : ¥4.02287 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	13.2V	3.3V	-	0.725V @ 250mA	250mA	5 µA	-	44dB (100Hz)	-	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	TO-236-3, SC-59, SOT-23-3	SOT-23A-3
LT3080EST#TRPBF IC REG LIN POS ADJ 1.1A SOT223-3 Analog Devices Inc.	501 In Stock	1 : ¥48.36000 Cut Tape (CT) 2,000 : ¥24.26232 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	36V	0V	36V	1.6V @ 1.1A	1.1A	500 µA	30 mA	75db ~ 20dB (120Hz ~ 1MHz)	-	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-3
LT3080EQ#TRPBF IC REG LIN POS ADJ 1.1A 5DDPAK Analog Devices Inc.	2,787 In Stock	1 : ¥53.86000 Cut Tape (CT) 750 : ¥35.08748 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	36V	0V	36V	1.6V @ 1.1A	1.1A	500 µA	30 mA	75db ~ 20dB (120Hz ~ 1MHz)	-	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	TO-263-6, D2PAK (5 Leads + Tab), TO-263BA	DDPAK-5

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.