Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

NCV1117ST33T3G IC REG LINEAR 3.3V 1A SOT223 onsemi	12,073 In Stock	1 : ¥5.34000 Cut Tape (CT) 4,000 : ¥1.92528 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	20V	3.3V	-	1.2V @ 800mA	1A	10 mA	-	64dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C (TA)	Automotive	AEC-Q100	Surface Mount	TO-261-4, TO-261AA	SOT-223
ADP123AUJZ-R7 IC REG LIN POS ADJ 300MA TSOT23 Analog Devices Inc.	62,217 In Stock	1 : ¥12.89000 Cut Tape (CT) 3,000 : ¥5.45577 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	5.5V	0.8V	5V	0.15V @ 300mA	300mA	105 µA	240 µA	60dB (10kHz ~ 100kHz)	Enable	Over Current, Over Temperature, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	-	-	Surface Mount	SOT-23-5 Thin, TSOT-23-5	TSOT-23-5
TPS78233DDCT IC REG LINEAR 3.3V 150MA SOT23-5 Texas Instruments	4,618 In Stock	1 : ¥11.58000 Cut Tape (CT) 250 : ¥7.52272 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.25V @ 150mA	150mA	1.3 µA	8 µA	40dB ~ 15dB (10Hz ~ 1kHz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	-	-	Surface Mount	SOT-23-5 Thin, TSOT-23-5	SOT-23-THIN

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.