Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LM317AT/NOPB IC REG LIN POS ADJ 1.5A TO220-3 Texas Instruments	5,706 In Stock	1 : ¥15.93000 Tube	-	Tube	Active	Positive	Adjustable	1	40V	1.25V	37V	-	1.5A	10 mA	-	80dB ~ 65dB (120Hz)	-	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C	Through Hole	TO-220-3	TO-220-3
LT1764EQ-3.3#TRPBF IC REG LINEAR 3.3V 3A 5DDPAK Analog Devices Inc.	2,744 In Stock	1 : ¥95.48000 Cut Tape (CT) 750 : ¥62.20633 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	20V	3.3V	-	0.66V @ 3A	3A	1.5 mA	200 mA	63dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C (TJ)	Surface Mount	TO-263-6, D2PAK (5 Leads + Tab), TO-263BA	DDPAK-5
LT3080EMS8E-1#PBF IC REG LINEAR POS ADJ 1.1A 8MSOP Analog Devices Inc.	877 In Stock	1 : ¥51.64000 Tube	-	Tube	Active	Positive	Adjustable	1	36V	0V	36V	1.6V @ 1.1A	1.1A	500 µA	30 mA	75db ~ 20dB (120Hz ~ 1MHz)	-	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad	8-MSOP-EP

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.