28V Voltage Regulators - Linear, Low Drop Out (LDO) Regulators | Power Management (PMIC) | Electronic Components Distributor DigiKey

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

TPS79801QDGNRQ1 IC REG LIN POS ADJ 50MA 8HVSSOP Texas Instruments	7,671 In Stock	1 : ¥19.05000 Cut Tape (CT) 2,500 : ¥8.71971 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	50V	1.275V	28V	0.55V @ 50mA	50mA	80 µA	3.3 mA	65dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Automotive	AEC-Q100	Surface Mount	8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad	8-HVSSOP
MAX1616EUK+T IC REG LIN POS ADJ 30MA SOT23-5 Analog Devices Inc./Maxim Integrated	3,377 In Stock	1 : ¥30.54000 Cut Tape (CT) 2,500 : ¥15.32840 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	28V	1.24V	28V	0.35V @ 30mA	30mA	-	-	-	Enable	Over Current, Over Temperature	-40°C ~ 85°C (TA)	-	-	Surface Mount	SC-74A, SOT-753	SOT-23-5
TLV709A01DBVR IC Texas Instruments	0 In Stock Check Lead Time	1 : ¥4.85000 Cut Tape (CT) 3,000 : ¥1.86726 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	30V	1.2V	28V	1.6V @ 150mA	150mA	-	10 µA	60dB (100kHz)	Soft Start	Over Current	-40°C ~ 125°C (TJ)	-	-	Surface Mount	SC-74A, SOT-753	SOT-23-5

Showing

of 3

28V Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.