Power Distribution Switches, Load Drivers

Results: 2
Series
-PROFET®
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)
Product Status
ActiveLast Time Buy
Voltage - Load
5V ~ 58V6V ~ 52V
Current - Output (Max)
1.3A38A
Rds On (Typ)
7.2mOhm175mOhm
Features
Auto RestartStatus Flag
Supplier Device Package
PG-DSO-8-24PG-TO220-7-4
Package / Case
8-SOIC (0.154", 3.90mm Width)TO-263-8, D2PAK (7 Leads + Tab), TO-263CA
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Switch Type
Number of Outputs
Ratio - Input:Output
Output Configuration
Output Type
Interface
Voltage - Load
Voltage - Supply (Vcc/Vdd)
Current - Output (Max)
Rds On (Typ)
Input Type
Features
Fault Protection
Operating Temperature
Mounting Type
Supplier Device Package
Package / Case
BTS4175SGAXUMA1
IC PWR SWITCH N-CHAN 1:1 DSO-8
Infineon Technologies
18,162
In Stock
1 : ¥13.79000
Cut Tape (CT)
2,500 : ¥6.30233
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
General Purpose
1
1:1
High Side
N-Channel
On/Off
6V ~ 52V
Not Required
1.3A
175mOhm
Non-Inverting
Status Flag
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
-40°C ~ 150°C (TJ)
Surface Mount
PG-DSO-8-24
8-SOIC (0.154", 3.90mm Width)
TO-263-8, D²Pak (7 Leads + Tab), TO-263CA
BTS500851TMAATMA1
IC PWR SWITCH N-CHAN 1:1 TO220-7
Infineon Technologies
0
In Stock
1 : ¥57.72000
Cut Tape (CT)
1,000 : ¥32.72506
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Last Time Buy
General Purpose
1
1:1
High Side
N-Channel
On/Off
5V ~ 58V
Not Required
38A
7.2mOhm
Non-Inverting
Auto Restart
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
-40°C ~ 150°C (TJ)
Surface Mount
PG-TO220-7-4
TO-263-8, D2PAK (7 Leads + Tab), TO-263CA
Showing
of 2

Power Distribution Switches, Load Drivers

Products in this family are solid-state devices used to connect or interrupt the flow of current to a supported load, under the direction of a logic-level control signal that is of itself incapable or unsuitable for supplying the load. They integrate the semiconductor switching device used to interrupt current flow and incorporate additional supporting components/functions such as over-voltage clamping, current limiting, and under-voltage lockouts, which differentiate them from similar IC and discrete components.