Power Distribution Switches, Load Drivers

Results: 2
Manufacturer
Diodes IncorporatedTexas Instruments
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)
Output Type
N-ChannelP-Channel
Voltage - Load
1.4V ~ 5.5V3V ~ 5.5V
Current - Output (Max)
2A2.1A
Rds On (Typ)
35mOhm65mOhm
Features
-Slew Rate Controlled
Fault Protection
Current Limiting (Adjustable), Over Temperature, Short Circuit, UVLOReverse Current, UVLO
Supplier Device Package
4-DSBGA (0.88x0.88)SOT-26 (Type A1)
Package / Case
4-XFBGA, DSBGASOT-23-6
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Switch Type
Number of Outputs
Ratio - Input:Output
Output Configuration
Output Type
Interface
Voltage - Load
Voltage - Supply (Vcc/Vdd)
Current - Output (Max)
Rds On (Typ)
Input Type
Features
Fault Protection
Operating Temperature
Mounting Type
Supplier Device Package
Package / Case
SOT 26
AP22653AW6-7
LOAD SWITCH,SOT26,T&R,3K
Diodes Incorporated
372,236
In Stock
105,000
Factory
1 : ¥3.61000
Cut Tape (CT)
3,000 : ¥1.09447
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
General Purpose
1
1:1
High Side
N-Channel
On/Off
3V ~ 5.5V
Not Required
2.1A
65mOhm
Non-Inverting
-
Current Limiting (Adjustable), Over Temperature, Short Circuit, UVLO
-40°C ~ 85°C (TA)
Surface Mount
SOT-26 (Type A1)
SOT-23-6
4-DSBGA
TPS22930AYZVT
IC PWR SWITCH P-CHAN 1:1 4DSBGA
Texas Instruments
4,435
In Stock
1 : ¥10.84000
Cut Tape (CT)
250 : ¥4.96240
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
General Purpose
1
1:1
High Side
P-Channel
On/Off
1.4V ~ 5.5V
Not Required
2A
35mOhm
Non-Inverting
Slew Rate Controlled
Reverse Current, UVLO
-40°C ~ 85°C (TA)
Surface Mount
4-DSBGA (0.88x0.88)
4-XFBGA, DSBGA
Showing
of 2

Power Distribution Switches, Load Drivers

Products in this family are solid-state devices used to connect or interrupt the flow of current to a supported load, under the direction of a logic-level control signal that is of itself incapable or unsuitable for supplying the load. They integrate the semiconductor switching device used to interrupt current flow and incorporate additional supporting components/functions such as over-voltage clamping, current limiting, and under-voltage lockouts, which differentiate them from similar IC and discrete components.