Power Distribution Switches, Load Drivers

Results: 2
Manufacturer
Renesas Electronics CorporationVishay Siliconix
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)
Voltage - Load
1.2V ~ 5.5V-
Voltage - Supply (Vcc/Vdd)
2.5V ~ 5.5VNot Required
Current - Output (Max)
1A3A
Rds On (Typ)
46mOhm80mOhm
Input Type
CMOSNon-Inverting
Operating Temperature
-40°C ~ 125°C (TJ)-20°C ~ 70°C (TA)
Supplier Device Package
4-STDFN (1x1)TSOT-23-6
Package / Case
4-UFDFNSOT-23-6 Thin, TSOT-23-6
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Switch Type
Number of Outputs
Ratio - Input:Output
Output Configuration
Output Type
Interface
Voltage - Load
Voltage - Supply (Vcc/Vdd)
Current - Output (Max)
Rds On (Typ)
Input Type
Features
Fault Protection
Operating Temperature
Mounting Type
Supplier Device Package
Package / Case
TSOT-23-6, TSOT-6
SIP32510DT-T1-GE3
IC PWR SWTCH N-CHAN 1:1 TSOT23-6
Vishay Siliconix
40,651
In Stock
1 : ¥3.78000
Cut Tape (CT)
3,000 : ¥1.33016
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
General Purpose
1
1:1
High Side
N-Channel
On/Off
1.2V ~ 5.5V
Not Required
3A
46mOhm
Non-Inverting
Load Discharge, Slew Rate Controlled
Reverse Current
-40°C ~ 125°C (TJ)
Surface Mount
TSOT-23-6
SOT-23-6 Thin, TSOT-23-6
4-STDFN
SLG59M1495V
IC PWR SWITCH N-CHAN 1:1 4STDFN
Renesas Electronics Corporation
56,437
In Stock
1 : ¥3.61000
Cut Tape (CT)
8,000 : ¥1.02617
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
General Purpose
1
1:1
High Side
N-Channel
-
-
2.5V ~ 5.5V
1A
80mOhm
CMOS
-
-
-20°C ~ 70°C (TA)
Surface Mount
4-STDFN (1x1)
4-UFDFN
Showing
of 2

Power Distribution Switches, Load Drivers

Products in this family are solid-state devices used to connect or interrupt the flow of current to a supported load, under the direction of a logic-level control signal that is of itself incapable or unsuitable for supplying the load. They integrate the semiconductor switching device used to interrupt current flow and incorporate additional supporting components/functions such as over-voltage clamping, current limiting, and under-voltage lockouts, which differentiate them from similar IC and discrete components.