Buffers, Drivers, Receivers, Transceivers

Results: 5

Filters

Stacked

Scrolling

Showing

of 5

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Logic Type	Number of Elements	Number of Bits per Element	Input Type	Output Type	Current - Output High, Low	Voltage - Supply	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

SN74LVC2G125DCTR IC BUFFER NON-INVERT 5.5V SM8 Texas Instruments	12,024 In Stock	1 : ¥5.09000 Cut Tape (CT) 3,000 : ¥1.80064 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	2	1	-	3-State	32mA, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	-	-	Surface Mount	8-LSSOP, 8-MSOP (0.110", 2.80mm Width)	SM8
74AUP1T34GM-Q100X IC TRANSLTR UNIDIRECTIONAL 6XSON Nexperia USA Inc.	31,781 In Stock	1 : ¥3.37000 Cut Tape (CT) 5,000 : ¥1.35268 Tape & Reel (TR)	74AUP	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	-	Push-Pull	4mA, 4mA	1.1V ~ 3.6V	-40°C ~ 125°C (TA)	Automotive	AEC-Q100	Surface Mount	6-XFDFN	6-XSON, SOT886 (1.45x1)
SN74LVC244ADWR IC BUF NON-INVERT 3.6V 20SOIC Texas Instruments	25,389 In Stock	1 : ¥4.52000 Cut Tape (CT) 2,000 : ¥1.60659 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	2	4	-	3-State	24mA, 24mA	1.65V ~ 3.6V	-40°C ~ 125°C (TA)	-	-	Surface Mount	20-SOIC (0.295", 7.50mm Width)	20-SOIC
SN74LVC541APW IC BUF NON-INVERT 3.6V 20TSSOP Texas Instruments	2,518 In Stock	1 : ¥10.18000 Tube	74LVC	Tube	Active	Buffer, Non-Inverting	1	8	-	3-State	24mA, 24mA	1.65V ~ 3.6V	-40°C ~ 125°C (TA)	-	-	Surface Mount	20-TSSOP (0.173", 4.40mm Width)	20-TSSOP
74AUP1T50GWH IC BUF NON-INVERT 3.6V 5TSSOP Nexperia USA Inc.	11,774 In Stock	1 : ¥4.02000 Cut Tape (CT) 3,000 : ¥1.41891 Tape & Reel (TR)	74AUP	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	Schmitt Trigger	Push-Pull	4mA, 4mA	2.3V ~ 3.6V	-40°C ~ 125°C	-	-	Surface Mount	5-TSSOP, SC-70-5, SOT-353	5-TSSOP

Showing

of 5

Buffers, Drivers, Receivers, Transceivers

Logic buffers, drivers, receivers and transceivers allow isolated access to logic signals from one circuit for use in another circuit. Buffers pass their input signal, either unchanged or inverted, to their output and may be used to clean up a weak signal or drive a load. In a boolean logic simulator, a buffer is mainly used to increase propagation delay. Logic receivers and transceivers allow isolated communication between data buses.