DC DC Switching Controllers

Results: 2
Manufacturer
Infineon TechnologiesTexas Instruments
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)
Product Status
ActiveObsolete
Function
-Step-Down
Topology
BuckHalf-Bridge
Number of Outputs
12
Output Phases
12
Voltage - Supply (Vcc/Vdd)
11V ~ 18V11.25V ~ 26V
Frequency - Switching
35kHz ~ 1MHz48.25kHz ~ 1MHz
Synchronous Rectifier
NoYes
Control Features
Dead Time Control, Enable, Soft StartHybrid Hysteretic Control (HHC)
Operating Temperature
-40°C ~ 125°C (TJ)-25°C ~ 125°C (TJ)
Package / Case
16-SOIC (0.154", 3.90mm Width), 14 Leads20-SOIC (0.295", 7.50mm Width)
Supplier Device Package
14-SOICPG-DSO-20-45
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Output Type
Function
Output Configuration
Topology
Number of Outputs
Output Phases
Voltage - Supply (Vcc/Vdd)
Frequency - Switching
Duty Cycle (Max)
Synchronous Rectifier
Clock Sync
Serial Interfaces
Control Features
Operating Temperature
Mounting Type
Package / Case
Supplier Device Package
20-SOIC 0.295
ICE2HS01GXUMA1
IC REG CTRLR BUCK 20-DSO
Infineon Technologies
7,287
In Stock
1 : ¥24.14000
Cut Tape (CT)
1,000 : ¥12.76652
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Transistor Driver
Step-Down
Positive, Isolation Capable
Buck
2
2
11V ~ 18V
48.25kHz ~ 1MHz
50%
Yes
No
-
Dead Time Control, Enable, Soft Start
-25°C ~ 125°C (TJ)
Surface Mount
20-SOIC (0.295", 7.50mm Width)
PG-DSO-20-45
7,456
In Stock
1 : ¥29.06000
Cut Tape (CT)
2,500 : ¥14.58952
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Obsolete
Transistor Driver
-
Positive, Isolation Capable
Half-Bridge
1
1
11.25V ~ 26V
35kHz ~ 1MHz
50%
No
No
-
Hybrid Hysteretic Control (HHC)
-40°C ~ 125°C (TJ)
Surface Mount
16-SOIC (0.154", 3.90mm Width), 14 Leads
14-SOIC
Showing
of 2

DC DC Switching Controllers

PMIC (Power Management Integrated Circuit) DC to DC switching controllers are voltage regulation ICs used in high efficiency circuits configured to generate output supply voltages above (boost or step-up) or below (buck or step-down) the input supply. Other topologies may include; buck-boost, flyback, forward, cuk, SEPIC, full bridge, half bridge, and push-pull. They differ from linear regulators that require minimum voltages and "burn off" excess voltage.