Common Mode Chokes

Results: 2
Manufacturer
Bourns Inc.Murata Power Solutions Inc.
Series
5000SRF0504
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)
Filter Type
Power LineSignal Line
Inductance @ Frequency
6 µH @ 100 kHz470 µH @ 100 kHz
Current Rating (Max)
500mA700mA
DC Resistance (DCR) (Max)
200mOhm300mOhm
Voltage Rating - DC
50V-
Operating Temperature
-40°C ~ 125°C-40°C ~ 85°C
Size / Dimension
0.205" L x 0.197" W (5.20mm x 5.00mm)0.366" L x 0.232" W (9.30mm x 5.90mm)
Height (Max)
0.183" (4.65mm)0.189" (4.80mm)
Package / Case
Horizontal, 4 J-LeadHorizontal, 4 PC Pad
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Filter Type
Number of Lines
Impedance @ Frequency
Inductance @ Frequency
Current Rating (Max)
DC Resistance (DCR) (Max)
Voltage Rating - DC
Voltage Rating - AC
Operating Temperature
Ratings
Approval Agency
Features
Mounting Type
Size / Dimension
Height (Max)
Package / Case
50105C
50474C
CMC 470UH 700MA 2LN SMD
Murata Power Solutions Inc.
3,003
In Stock
1 : ¥7.40000
Cut Tape (CT)
1,000 : ¥7.39524
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Power Line
2
-
470 µH @ 100 kHz
700mA
300mOhm
-
-
-40°C ~ 85°C
-
-
-
Surface Mount
0.366" L x 0.232" W (9.30mm x 5.90mm)
0.183" (4.65mm)
Horizontal, 4 J-Lead
SRF0504 Series
SRF0504-302Y
CMC 6UH 500MA 2LN 3KOHM SMD
Bourns Inc.
0
In Stock
Check Lead Time
1 : ¥12.31000
Cut Tape (CT)
1,000 : ¥6.44631
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
2
3 kOhms @ 100 MHz
6 µH @ 100 kHz
500mA
200mOhm
50V
-
-40°C ~ 125°C
-
-
-
Surface Mount
0.205" L x 0.197" W (5.20mm x 5.00mm)
0.189" (4.80mm)
Horizontal, 4 PC Pad
Showing
of 2

Common Mode Chokes

A common mode choke is an electrical filter that blocks high frequency noise common to two or more data or power lines while allowing the desired DC or low-frequency signal to pass. Common mode (CM) noise current is typically radiated from sources such as unwanted radio signals, unshielded electronics, inverters and motors. Left unfiltered, this noise presents interference problems in electronics and electrical circuits.