Common Mode Chokes

Results: 2

Filters

Stacked

Scrolling

Showing

of 2

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Filter Type	Number of Lines	Impedance @ Frequency	Inductance @ Frequency	Current Rating (Max)	DC Resistance (DCR) (Max)	Voltage Rating - DC	Voltage Rating - AC	Operating Temperature	Ratings	Approval Agency	Features	Mounting Type	Size / Dimension	Height (Max)	Package / Case

DLW43MH201XK2L CMC 200UH 110MA 2LN SMD AEC-Q200 Murata Electronics	50,114 In Stock	1 : ¥14.03000 Cut Tape (CT) 500 : ¥7.48666 Tape & Reel (TR)	DLW43	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Signal Line	2	-	200 µH @ 100 kHz	110mA	4.5Ohm	20V	-	-40°C ~ 105°C	AEC-Q200	-	-	Surface Mount	0.177" L x 0.126" W (4.50mm x 3.20mm)	0.114" (2.90mm)	Horizontal, 4 PC Pad
DLW5BTM101SQ2L CMC 6A 2LN 100 OHM SMD Murata Electronics	0 In Stock	1 : ¥11.22000 Cut Tape (CT) 700 : ¥5.86726 Tape & Reel (TR)	DLW5B	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Power, Signal Line	2	100 Ohms @ 100 MHz	-	6A	13mOhm	50V	-	-40°C ~ 85°C	-	-	-	Surface Mount	0.197" L x 0.197" W (5.00mm x 5.00mm)	0.098" (2.50mm)	Horizontal, 4 PC Pad

Showing

of 2

Common Mode Chokes

A common mode choke is an electrical filter that blocks high frequency noise common to two or more data or power lines while allowing the desired DC or low-frequency signal to pass. Common mode (CM) noise current is typically radiated from sources such as unwanted radio signals, unshielded electronics, inverters and motors. Left unfiltered, this noise presents interference problems in electronics and electrical circuits.