Common Mode Chokes

Results: 2
Manufacturer
Pulse ElectronicsTDK Corporation
Series
ACMAWCU
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)
Impedance @ Frequency
67 Ohms @ 100 MHz1 kOhms @ 100 MHz
Current Rating (Max)
200mA400mA
DC Resistance (DCR) (Max)
250mOhm900mOhm
Voltage Rating - DC
20V50V
Operating Temperature
-50°C ~ 150°C-40°C ~ 85°C
Ratings
-AEC-Q200
Size / Dimension
0.081" L x 0.049" W (2.05mm x 1.25mm)0.098" L x 0.079" W (2.50mm x 2.00mm)
Height (Max)
0.051" (1.30mm)0.055" (1.40mm)
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Filter Type
Number of Lines
Impedance @ Frequency
Current Rating (Max)
DC Resistance (DCR) (Max)
Voltage Rating - DC
Voltage Rating - AC
Operating Temperature
Ratings
Approval Agency
Features
Mounting Type
Size / Dimension
Height (Max)
Package / Case
ACM2520-102-2P
ACM2520-102-2P-T002
CMC 200MA 2LN 1K OHM SMD
TDK Corporation
47,230
In Stock
1 : ¥7.14000
Cut Tape (CT)
2,000 : ¥3.39288
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
2
1 kOhms @ 100 MHz
200mA
900mOhm
20V
-
-40°C ~ 85°C
-
-
-
Surface Mount
0.098" L x 0.079" W (2.50mm x 2.00mm)
0.051" (1.30mm)
Horizontal, 4 PC Pad
AWCU00201212181M02
AWCU00201212670M02
CMC 400MA 2LN 67OHM SMD AEC-Q200
Pulse Electronics
2,000
In Stock
1 : ¥2.30000
Cut Tape (CT)
2,000 : ¥0.98231
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
2
67 Ohms @ 100 MHz
400mA
250mOhm
50V
-
-50°C ~ 150°C
AEC-Q200
-
-
Surface Mount
0.081" L x 0.049" W (2.05mm x 1.25mm)
0.055" (1.40mm)
Horizontal, 4 PC Pad
Showing
of 2

Common Mode Chokes

A common mode choke is an electrical filter that blocks high frequency noise common to two or more data or power lines while allowing the desired DC or low-frequency signal to pass. Common mode (CM) noise current is typically radiated from sources such as unwanted radio signals, unshielded electronics, inverters and motors. Left unfiltered, this noise presents interference problems in electronics and electrical circuits.