The XRP7714EVB-DEMO-1, XRP7714EVB-DEMO-2, and the XRP7714EVB-DEMO-2P demo boards are complete, working, four channel, power systems measuring either 2”x2”, or 2”x2.5” capable of delivering over 35 watts. They provide 3.3V, 2.5V, 1.8V, and 1V at a maximum of 4 amps per channel. The 2.5V, 1.8V, and 1V supplies can be adjusted in 50mV increments, and the 3.3V supply is adjustable in 100mV increments.
The order and ramp rates for each supply can be programmed to accommodate any sequencing requirement. All power supply operations can be controlled over an I2C interface. Faults, output voltages, and currents can also be monitored. Four GPIO signals are available to provide status of power good signals, enables, and faults. Unused GPIO pins can be programmed as I/O expansion for a microcontroller. The board is supported by PowerArchitect™ and plugs directly onto the Exar Communications Module (XRP77XXEVB-XCM).
Manufacturer | MaxLinear, Inc. |
---|---|
Category | AC/DC and DC/DC Conversion |
Sub-Category | DC/DC SMPS - Multi Output |
Eval Board Part Number | 1016-1609-ND |
Eval Board Supplier | MaxLinear, Inc. |
Eval Board |
Board not Stocked
|
Topology |
Step Down
|
Outputs and Type |
4 Non-Isolated
|
Voltage Out: Highest Current First |
3.3V, 2.5V, 1.8V, 1V
|
Current Out |
4A per Channel
|
Voltage In |
4.5 ~ 25 V
|
Efficiency @ Conditions |
>87%, 20V in, 0.5 ~ 2.55 A (all ch.)
>85%, 15V in, 0.5 ~ 3.3 A (all ch.) >85%, 12V in, 0.6 ~ 3.2 A (all ch.) >82%, 8V in, 0.8 ~ 4 A (all ch.) >82%, 10V in, 0.6 ~ 4 A (all ch.) >80%, 6.5V in, 1.05 ~ 4 A (all ch.) |
Voltage Out Range |
3.3 ~ 5 V, 1.8 ~ 2.5 V, 1.5 ~ 1.8 V, 0.9 ~ 1.2 V
|
Features |
Current Limit (Adj. or Fixed)
Fault Indication I²C Interface LDO Regulator(s), On-Chip Over Current Protection Over Voltage Protection PFM or PWM Shutdown, Enable, Standby Thermal Protection Under Voltage Protection, Brown-Out |
Switching Frequency |
300 kHz ~ 1.5 MHz
|
Standby Current [Typical] |
180 µA
|
Quiescent Current [Typical] |
9 mA
|
Component Count + Extras |
66 + 21
|
Internal Switch |
No
|
Design Author |
Exar Corporation
|
Application / Target Market |
Audio: Hi Fi
FPGA / DSP / Processors Power: Auxiliary Power Supply Power: Industrial Power Telecom |
Standby Current [Maximum] |
- Not Given
|
Quiescent Current [Maximum] |
- Not Given
|
Main I.C. Base Part |
XRP7714
|
Date Created By Author | 2012-06 |
Date Added To Library | 2014-07 |