RMB | USD
您的项目
查看购物车

参考设计库 ，电子元件原理图

About Reference Design Library

Instead of searching many manufacturer sites or calling on companies to find and compare designs, now you can search for designs based on the circuit’s performance using Digi-Key’s Reference Design Library.

The Reference Design Library was created in order to:

  • Save Engineers time
  • Deliver ideas, fast
  • Sift through designs based on performance
  • Provide designs conveniently accompanied by their schematics

Visit often as new designs are being added weekly and improvements will be made based on your constructive feedback.

Only Show Designs Added Within  Last 30 Days (4) Last 90 Days (31)

Newest 3 Added

Schematic

NCL30388LED1GEVB: 60W, 40V @ 1.5A 100 ~ 265VAC in

Manufacturer: ON Semiconductor

The NCL30388LED1GEVB Evaluation board demonstrates an isolated Primary Side Regulation 60 W high PF flyback LED driver for a typical troffer application. The Key Features of this Demo Board Low THD, High Power Factor, Fast Startup, CC/CV Operation, Integrated Fault Protection, Brown Out Protection, Winding and Diode Short Circuit Protection, Over Temperature, Output Over Current and Over Voltage Protection.

View Design
Schematic

FSUSB242GEVB: USB Type-C Port Protection Switch

Manufacturer: ON Semiconductor

The FSUSB242GEVB is an evaluation board for the FSUSB242 USB switch that provides high voltage and surge protection for the HSD+/HSD- lines. Electrical surge is an increasing concern for small form factor connectors such USB microB and USB Type-C™. This evaluation board will demonstrate 2:1 switching while maintaining sufficient signal integrity so the USB 2.0 HS eye diagram can still be passed.

View Design
Schematic

STEVAL-LLL008V1: 100W, 1.4A @ 70V 90 ~ 265 VAC, 6LoWPAN Mesh Networking

Manufacturer: STMicroelectronics

The STEVAL-LLL008V1 reference design is a dual-stage LED driver with high power factor designed for 100 W LED lighting applications using 6LoWPAN Mesh networking. The front-end flyback converter provides high power factor and low THD and implements CV primary side regulation (PSR) with input from an auxiliary winding on the transformer through the ZCD pin on the HVLED001B controller, so no isolated optocoupler is required. The flyback converter can deliver 105 W with an average 79 V output.

View Design

Additional Tools and Support