The RP605 is a Buck-Boost DC/DC Converter with a battery monitor, designed to use in wearable devices, applications for Internet of Things (IoT) and wireless communications modules requiring a low level of current consumption to extend battery life.

The NJM2904B and NJM2902B are versatile operational amplifiers for automotive use. The features took over from original NJM2904 and NJM2902 such as wide operating voltage range and common-mode input range to ground level or unity gain stability.

The NJM8830 is a ultralow distortion ultralow noise Rail-to-Rail output dual audio operational amplifier. The NJM8830 features ultralow distortion, ultralow noise, wide bandwidth, high slew rate, high output current and small package.

The NJG1186PJL is a front-end module (FEM) designed for GNSS L5/L2C band applications. This FEM offers low noise figure, high linearity, and high out-band rejection characteristics brought by integrated high performance pre-SAW filter and LNA.

The NT1191 and NT1192 are especially designed for high-precision GNSS receiver applications, such as GPS, GLONASS, COMPASS/BeiDou and Galileo. Targeted applications are for example car/personal navigation systems, and tracking devices.

The NC2600 is a low quiescent current PWM / PFM 2A step-down switching regulator IC using CMOS-based. The NC2600 is available in WLCSP-8-P11 and DFN2020-8-GT (Under Development), and it is suitable for use in wearable and IoT devices.

The R5117 is a power management IC featuring input voltage range from 3.5 to 42 V. This IC includes battery voltage detector, SENSE voltage detector and 500 mA voltage regulator in a single chip.

The RP604 is a buck-boost converter featuring an ultra-low supply current and a high efficiency at low-load. The device is dedicated to use in applications which are mainly in sleep mode and wake up only to perform a brief task.

The RP124 is an LDO regulator with a battery monitor dividinges the input voltage into 1/3 or 1/4. The buffered output can be forwarded directly to a low voltage ADC and processed by an MCU. The purpose is to monitor the remaining battery charge.

The R5116 is a power management IC featuring an input voltage range from 3.5 to 42 V. This IC includes 500 mA voltage regulator and window voltage detector.

The RIOT-001 is an environment sensing board monitoring ambient temperature, humidity, air pressure, and illuminance for development. The measurements are collected by an onboard MCU and transmitted by Bluetooth Low Energy (BLE).

These RP514 RP515 are low voltage buck DC/DC converters feature a battery monitor to use as a simple battery gauge. The RP516 RP517 provide a low output voltage.

The R1525 is a 200mA voltage regulator and has an input voltage up to 42 V. This device has an excellent noise immunity and is suitable as an automotive power source for car accessories and control units.

The R1540 is a Voltage Tracker IC, it is primarily intended as a power supply for off-board sensors and modules and provides an additional safety level to keep the main power supply and associated critical circuits operational at all times.

R1800 is a power-storing buck DC/DC converter for a photovoltaic and vibration energy harvester. A low operating quiescent current allows a harvester to be used under a low-illumination environment.

R1810 is a boost DC/DC converter for storing electrical power, especially for 1 cell photovoltaic energy harvester.

The R1271 has a maximum input voltage rating of 42 V. The switching frequency of 2 MHz enables the use of small inductors. Peak efficiency is 85% and EMI noise reduction achieved by a spread spectrum clock generator.

The RM590 provides design convenience for the designer thanks to the built-in inductor and requires a small PCB board area thanks to the 6 MHz operating frequency. Automatic PWM / VFM switching ensures a stable efficiency output over.

The R3201 is a reset timer IC to reset a mobile equipment with a non-removable battery. It features a shipping mode to save current consumption during shelf storage or shipping.

The R1260 is a step-down DC/DC controller has an output voltage from 1.0 to 16.0 V using an external high- / low-side MOSFETs. It has a unique current mode PWM architecture without external current sense resistor but provides a stable output.