Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Slide 9 Slide 10 Slide 11 Slide 12 Slide 13 Slide 14 Slide 15 Slide 16 Slide 17 Slide 18 Slide 19 Product List
bit sleeve selection
To pick the right bit and sleeve, first determine the wire gauge that will be used. Next, determine the terminal dimensions. The Telecom industry typical standard is .045” X .045” or .030”, while the Electronic industry standard is typically .025” X .025”. After the terminal dimensions have been decided, choose the type of wrap, “regular” or “modified”. Telecom usually uses regular wraps and the Electronics industry usually uses modified. For further information on selecting the correct bit and sleeve part numbers, visit the Jonard website at www.jonard.com.
PTM Published on: 2011-11-16