Advanced Thermal Solutions Inc

砖式电源散热器

ATS 的砖式电源散热器专门设计用来冷却八分之一、四分之一、二分之一和全尺寸砖式 DC-DC 转换器

ATS 的砖式电源散热器图片砖式 DC-DC 电源转换器是 PCB 设计的重要组成部分。稳定的温度是这些器件获得最佳性能的保证。ATS 生产各种各样的高性能散热器系列。这些产品基于 maxiFLOW 专利设计，可有效冷却大多数电子应用中的 DC/DC 电源转换器和电源模块。

特性和优势
  • 可用于 DC/DC 电源转换器和电源模块，如 Vicor 的 V24A3V3x200Bx 和 Murata 的 MPDKN10_S
  • 高性能 maxiFLOW 设计具有更少的压降、更大的表面积，最大限度地提升了对流（空气）冷却效果
  • 附送预装、高性能 Chomerics T-766 相变材料
  • 结温比其它砖式散热器低 20% 
  • 结温 (Tj) 降低达 20% 以上
  • 提供 3 组 5 mm、6 mm 和 8 mm 长度的螺丝
  • 采用长度：
    • 长度：23 mm 至 58 mm
    • 宽度：23 mm 至 58 mm
    • 高度：6.1 mm 至 22.9 mm
    • 鳍片尖到鳍片尖：23 mm 至 58 mm

视频︰DC 至 DC 转换器和砖式电源散热器

Brick Heat Sinks

图片制造商零件编号描述可供货数量价格查看详情
1/4 BRICK HEATSINK 58X37X11.4MMATS-1099-C1-R01/4 BRICK HEATSINK 58X37X11.4MM1119 - 立即发货$137.53查看详情
1/8 BRICK HEATSINK 23X58X22.9MMATS-1186-C1-R01/8 BRICK HEATSINK 23X58X22.9MM307 - 立即发货$151.51查看详情
1/4 BRICK HEATSINK 37X58X11.4MMATS-1139-C1-R01/4 BRICK HEATSINK 37X58X11.4MM755 - 立即发货$169.20查看详情
FULL BRICK HEATSINK 117X61X11.4MATS-1109-C1-R0FULL BRICK HEATSINK 117X61X11.4M0 - 立即发货$203.94查看详情
1/2 BRICK HEATSINK 58X61X22.9MMATS-1146-C1-R01/2 BRICK HEATSINK 58X61X22.9MM405 - 立即发货$211.13查看详情
FULL BRICK HEATSINK 61X118X20MMATS-1151-C1-R0FULL BRICK HEATSINK 61X118X20MM2024 - 立即发货$243.06查看详情
1/8 BRICK HEATSINK 58X23X11.4MMATS-1179-C1-R01/8 BRICK HEATSINK 58X23X11.4MM654 - 立即发货$111.56查看详情
1/8 BRICK HEATSINK 23X59X11.4MMATS-1184-C1-R01/8 BRICK HEATSINK 23X59X11.4MM180 - 立即发货$136.95查看详情
1/2 BRICK HEATSINK 61X58X11.4MMATS-1104-C1-R01/2 BRICK HEATSINK 61X58X11.4MM470 - 立即发货$178.14查看详情
1/2 BRICK HEATSINK 58X61X11.4MMATS-1144-C1-R01/2 BRICK HEATSINK 58X61X11.4MM268 - 立即发货$178.14查看详情
发布日期： 2016-04-20

Related Videos

ATS Explains - Thermal Interface Material
ATS Explains - Thermal Interface Material

发布日期：2018-01-26

DC to DC Converters and Power Brick Heat Sinks
DC to DC Converters and Power Brick Heat Sinks

发布日期：2016-07-07

Related Articles and Blogs

Feasibility Study of an LED-Based Lighting System Using Analytical Modeling A study of the heat loads for an outdoor LED-based lighting system using analytical modeling to determine the feasibility of the design with solar heat load.
Device Thermal Coupling on a PCB A look at how components on a printed circuit board thermally couple and the design considerations that help minimize heat dissipation problems.
Air Flow Measurement in Electronic Systems An analysis of circuit board air flow measurement techniques and the considerations required to obtain an accurate reading in this complex environment.

Related Product Training Modules

Introduction to Heat Sinks This module will review the use of heat sinks, including how a heat sink works, the factors that impact heat sink thermal performance, common heat sink materials, and thermal interface materials.
maxiFLOW Power Brick Heat Sink Technology ATS’s power brick heat sinks are engineered to create minimum pressure drop and maximize fin surface area
maxiFLOW™ Heat Sinks maxiFLOW heat sinks feature a low profile spread fin array that maximizes surface area. Available in a wide variety of sizes and shapes.
条款和条件 隐私声明 沪ICP备19034648号-1 沪公网安备31010502004883号 上海工商 Cookie 设置
上海客服中心:上海市长宁区长宁路1133号长宁来福士广场T1幢办公楼32层3202、3203、3205、3206单元 邮编：200051 Copyright © 1995-2026 得捷电子（上海）有限公司。保留全部版权。
ECIA Member
This site is protected by VikingCloud's Trusted Commerce program
ECIA Member