STMicroelectronics 的 STM3210C-EVAL Data Brief 规格书

Data brief
For further information contact your local STMicroelectronics sales office.
August 2010 Doc ID 17799 Rev 1 1/3
3
STM3210C-EVAL
STM3210C-EVAL evaluation board
Features
■Three 5 V power supply options:
–power jack
– USB connector
– daughterboard
■Boot from user Flash, system memory or
SRAM
■I2S audio DAC, stereo audio jack
■2 GByte microSD Card™ or bigger
■Both A and B type smartcard support
■I2C compatible serial interface 64 Kbit
EEPROM, MEMS and I/O expander
■RS-232 channel
■IrDA transceiver
■USB OTG full speed, USB microAB connection
■IEEE-802.3-2002 compliant ethernet
connector
■Two channels of CAN 2.0A/B compliant
connection
■Inductor motor control connector
■JTAG and trace debug support
■3.2” 240x320 TFT color LCD with touch screen
■Joystick with 4-direction control and selector
■Reset, wakeup, tamper and user buttons
■4 color LEDs
■RTC with backup battery
■MCU consumption measurement circuit
■Extension connector for daughterboard or
wrapping board
Description
The STM3210C-EVAL evaluation board is a
complete development platform for
STMicroelectronic's ARM Cortex-M3 core-based
STM32F107VCT microcontroller. The range of
hardware features on the board help you to
evaluate all peripherals (USB-OTG FS, ethernet,
motor control, CAN, microSD CardTM, smartcard,
USART, audio DAC, MEMS, EEPROM and more)
and develop your own applications.
Extension headers make it easy to connect a
daughterboard or wrapping board for your specific
application.
Table 1. Device summary
Order code Reference
STM3210C-EVAL STM32F107VCT evaluation
board
www.st.com
STM3210C-EVAL
2/3 Doc ID 17799 Rev 1
STM3210C-EVAL hardware block diagram
Figure 1 is a block diagram of the STM3210C-EVAL hardware.
Figure 1. Hardware block diagram
Demonstration software
Demonstration software is preloaded in the board’s Flash memory for easy demonstration of
the device peripherals in stand-alone mode. For more information and to download the
latest version, refer to www.st.com.
Revision history
STM32F107VCT
RS-232
transceiver
IrDA
transceiver
Smartcard
interface
3.3V regulator
TFT LCD
MicroSD
Card
Audio DAC
2 BNC connector
MC control
connector
LEDs,Key
JTAG
MEMS
Potentiometer
Smartcard
connector
Integrated RJ45
connector
USART 2
DB9 connector
ADC
I2S2
GPIO
MII/RMII
USART3
I2C1
Extension
connector for
GPIOs
MCU
consumption
measurement
PHY
USART2
CAN1 CAN
transceiver
CAN
DB9 connector
MC
SPI3
Trace
Debug
OTG USB microAB
connector
EEPROM
I/O expander
Joystick
Touchscreen
USB power
switch
CAN2 CAN
transceiver
CAN
DB9 connector
Battery voltage
measurement
Table 2. Document revision history
Date Revision Changes
06-Aug-2010 1 Initial release.
STM3210C-EVAL
Doc ID 17799 Rev 1 3/3
Please Read Carefully:
I
nformation in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve th
e
r
ight to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at an
y
t
ime, without notice.
A
ll ST products are sold pursuant to ST’s terms and conditions of sale.
P
urchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes n
o
l
iability whatsoever relating to the choice, selection or use of the ST products and services described herein.
N
o license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of th
is
d
ocument refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party produc
ts
o
r services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of suc
h
t
hird party products or services or any intellectual property contained therein.
U
NLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIE
D
W
ARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIE
D
W
ARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAW
S
O
F ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
U
NLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NO
T
R
ECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAININ
G
A
PPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJUR
Y,
D
EATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIV
E
G
RADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
R
esale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately vo
id
a
ny warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, an
y
l
iability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com