Luminus Devices Inc. 的 SST-10-SB 规格书

规格书反馈/错误

(:LUMINUS

Applications

• Horticulture / Growlights

• Accent and effect lighting

• Architectural lighting

• Remote-phosphor fixtures

• Stage lighting

Features:

• High Power Sky Blue LED with Peak Wavelength of 470nm

• Wall-Plug Efficiency: typ. 50% @350mA

• 90 or 130° viewing angle at 50% Iv

• Operation at up to 1.5A CW

• Low Thermal Resistance

• Built-in ESD Protection

• RoHS and REACh compliant

Table of Contents

SST-10 Binning Structure ...2

Product Shipping & Labeling

Information ................3

Optical and Electrical

Characteristics .............4

B130 - Mech. Dimensions ...6

B130 - Tape and Reel .......7

B90 - Mech. Dimensions ....8

B90 - Tape and Reel .........9

Soldering Profile .........10

Precautions for Use .......11

History of Changes ....... 12

SST-10-SB

Sky Blue LED

SST-10-Sky Blue Product Datasheet

Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com

1145 Sonora Court • Sunnyvale, CA 94086

(:LUMINus

Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com

1145 Sonora Court • Sunnyvale, CA 94086

SST-10-Sky Blue Product Datasheet

SST-10 Binning Structure

SST-10 Sky Blue LEDs are tested for luminous flux and chromaticity at a drive current of 350mA - 20ms single pulse and placed into one of

the following luminous flux (FF) and chromaticity (WW) bins:

Flux Bin (FF) Minimum Flux (mW) Maximum Flux (mW)

M 470 510

N 510 550

P 550 590

Flux Bins - Test condition=350mA, 25C, 20ms pulse

Chromaticity Bin (WW) Minimum Wavelength (nm) Maximum Wavelength (nm)

B6 460 465

B7 465 470

B8 470 475

B9 475 480

Wavelength Bins - Test condition=350mA, 25C, 20ms pulse

*Note: Luminus maintains a +/- 6% tolerance on flux measurements.

Ordering Information

Products Ordering Part Number Description

SST-10-SB-B90 SST-10-SB-B90-xx123 High Power 1-mm2 Sky Blue LED in a 3535 surface mount package and a

90-degree lens

SST-10-SB-B130 SST-10-SB-B130-xx123 High Power 1-mm2 Sky Blue LED in a 3535 surface mount package and a

130-degree lens

(:LUMINus

Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com

1145 Sonora Court • Sunnyvale, CA 94086

SST-10-Sky Blue Product Datasheet

Part Number Nomenclature

Product Family LED Emission Area Color Package Configuration Bin kit

SST: Surface Mount

Package 10: 1.0 mm2<A>: Color

SB = Sky Blue

B90: 90-degree lens

B130: 130-degree lens

Flux and Chromaticity bin kit

code - See available ordering

codes below

SST 10 <A> <B###> <FF###>

SST-10 Bin Kit Order Codes

The following table describes the bin kit ordering codes available for the SST-10 Sky Blue LEDs. Each bin kit specifies a minimum flux as

well as specific chromaticity bins allowed. Please note that within each kit a maximum flux is not specified and as a result Luminus may

ship any part meeting or exceeding the minimum flux specification. Shipments will always meet the listed chromaticity bins. For

information on ordering bin kits not listed below, please contact Luminus.

SST-10 Sky Blue Bin Kit Order Codes

Color

Luminous Flux

Chromaticity Bins Kit Number

Bin Kit Flux

Code Min. Flux

Sky Blue M 470 B6,B7,B8,B9 M470

Product Shipping & Labeling Information

All SST-10 products are packaged and labeled with their respective bin as outlined in the tables on pages 2 & 3. Each reel will only

contain one bin.

SST-10 Sky Blue

Product Family LED Emission Area Color Package Configuration Bin kit

SST: Surface Mount

Package 10: 1.0 mm2 Color B90: 90-degree lens

B130: 130-degree lens

Flux and Chromaticity bin kit

code as outlined above

SST 10 SB BXXX FFWW

(=LUMINUS

(Part #) Product Datasheet

Note 1: Ratings are based on operation at a constant junction temperature of Tj = 25ºC.

Note 2: To prevent damage, please refer to operating conditions and derating curves for appropriate maximum operating conditions

Note 3: Maximum operating case temperature combined with maximum drive current defines the total maximum operating condition for the device. To

prevent damage, please follow derating curves for all operating conditions.

Note 4: Luminus SST-10-Sky Blue LEDs

e designed for operation up to an absolute maximum forward drive current as specified above. Product lifetime

data is specified at typical forward drive currents. Sustained operation at absolute maximum currents will result in a reduction of device lifetime

compared to typical forward drive currents. Actual device lifetimes will also depend on junction temperature. Refer to the current vs. junction

temperature derating curves for further information. In pulsed operation, rise time from 10-90% of forward current should be larger than 0.5

microseconds.

Note 5: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage the eye.

Optical and Electrical Characteristics at 350mA1

Parameter Symbol Minimum Typical Maximum Unit

Forward Current2If350 1,500 mA

Output Power Φr470 530 590 mW

Lumen Output Φp30 49 80 lm

Forward Voltage Vf2.6 2.85 3.4 V

Wall-Plug Efficiency WPE 53 %

Viewing Angle 2 Ø1/2 90 or 130 degrees

Peak Wavelength λP460 470 480 nm

FWHM Dλ1/2 20 22 24 nm

Thermal Resistance (Electrical) RTH 5.3 °C/W

Absolute Maximum Ratings2

Parameter Symbol Rating Unit

Forward Current3,4 I 1.5 A

Power Dissipation Pd5.0 W

Reverse Voltage Vr5 V

Storage Temperature TsTg -40~100 °C

Junction Temperature3,4 Tj115 ºC °C

Soldering Temperature Tsld JEDEC 020, 260 ºC

ESD Sensitivity (HBM) VB6000 V

Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com

1145 Sonora Court • Sunnyvale, CA 94086

SST-10-Sky Blue Product Datasheet

Optical and Electrical Characteristics

@LUMINUS lzlwﬂv: Iadinmmk Puma : : t: g g i i i 5 E x ms 0.; ms 1 1.25 1.5 v. (A) Rehnue nun-um; mu m 30 to so 7a In an m 7: {'0 m: cur.) 0.11: g ma ; cm i 0.5a 2 m g m / : mm m - (mo / .w m 0.5 an MA) 1 1st :Vs Wavelengnunm)

(Part #) Product Datasheet

Relative Output Flux vs. Forward Current Forward Current vs. Forward Voltage

Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com

1145 Sonora Court • Sunnyvale, CA 94086

SST-10-Sky Blue Product Datasheet

Optical and Electrical Characteristics

0.2

0.4

0.6

0.8

1.0

20°

40°

60°

80°

0.2

0.4

0.6

0.8

1.0

0°

10°

20°

30°

40°

50°

60°

70°

80°

90°

Typical Polar Radiation Plot - B130 Typical Polar Radiation Plot - B90

Relative Output Flux vs. Junction Temperature Typical Spectra

(:LUMINus CENTER OF 01E EM1111NG AREA (D $151005] A a / CENTER OF ZENER D1o1>E .0 301n121® A a XE . m aAsfg [.mffﬁ U 1 1 1 1 E ¢ 1 [HM] D1EEM1THNG ‘ ‘ AREA $ [.044] v D1E Emma AREA 3.45ng [13$ $3] 1 90:13 075:.005] 3Ec11oN EE a 52:13 [mums] BACKOFSUBSTRATE V2.7 I 35 wow» ‘i 104.14- r 1,015] EMUUNGAREA ANODEJ 4/ ‘ 111 1.7 2.7 THEFAAALPADJ W371 [-057] “05] (NEUTPNJ Q CATHDDE4/J/ ‘ 50x13 112 [023:005] 1 [008] 1:; 17 27 1o:n [057] [.105] RECOMMENDED SOLDER PAD LAYOUT

Mechanical Dimensions - B130 Package

Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com

1145 Sonora Court • Sunnyvale, CA 94086

SST-10-Sky Blue Product Datasheet

@LUMINUS 4 00:010 ‘ V 157:004] 2 cam 10 [memo/q” ’ L «so'ggg [32:33:] : ,, 0591333 “j , , . eé¢¢ee$¢%@%¢$e$&$ cm 20 * + 1m $$$$¢~$$$$ 005 \ ;17u:010 i [ 002} [32:00:13] ‘ - 067: 004 ANODE SIDE A

Tape and Reel - B130 Package

8.00±0.10

.315±.004

2.00±0.10

.079±.004

4.00±0.10

.157±.004

1.50

0.10

0.00

.059

.004

.000

1.70±0.10

.067±.004

1.75±0.10

.069±.004

5.50±0.05

.217±.002

12.00±0.20

.472±.008

CATHODE SIDE

ANODE SIDE

3.80

0.10

0.00

.150

.004

.000

4.18

0.10

0.00

.165

.004

.000

0.25±0.05

5.0°

SECTION A-A

2.20

0.10

0.00

.087

.004

.000

3.80

0.10

0.00

.150

.004

.000

4.18

0.10

0.00

.165

.004

.000

5.0°

SECTION B-B

TOP VIEW

DETAIL D

178

.512

2.00

.079

21.3

.839

16.0

.630

120°

DETAIL C

12.4

.488

NOTES:

FINAL TAPE AND REEL PACKAGING MUST MEET THE

REQUIREMENTS OF JEDEC-STD-033, LEVEL 2A.

LEAVE 304.8mm [12.00 in] OF TAPE EMPTY FOR LEAD IN

(38 EMPTY POCKETS).

LEAVE 457.2mm [18.00 in] OF TAPE EMPTY FOR TRAILER

(57 EMPTY POCKETS).

MUST COMPLY TO EIA-481-C-2003

UNREELING DIRECTION

Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com

1145 Sonora Court • Sunnyvale, CA 94086

SST-10-Sky Blue Product Datasheet

(:LUMINus cEN1ER OF D1E EM1111NG AREA 9 $.151mé]@-ﬂ CENTER OF zENER D1ODE .0 301n121® A a ‘ $2.15 [055] t 20 3457 00 1.135% I 1 1 1 E «4 1044‘ ‘ 1 D1EEM1T11NG AREA $ [.044] V BE EMH‘HNG AREA R 2a 3.457130 [13533] G W 62: 1’3 1 {mum} BACK OFSUBSTPATE 10 TOP OF D1E EMTUNG AREA 1 (an) r 1,015] ANODEJ 1 H ERMAE PADJ (N EmRm 1 111 1.7 2.7 1,0391 1.0571 1.1051 CATHDDE¥ [025' 744 ﬂ R2 [008] 1:; 17 27 11150 [01:7] [.1013] 4_L VIII/III]; VIII/IIIA RECOMMENDED soLDER RAD LAYOUT

Mechanical Dimensions - B90 Package

Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com

1145 Sonora Court • Sunnyvale, CA 94086

SST-10-Sky Blue Product Datasheet

(:LUMINus L 75:: Lu use: LL (L4 $¢¢$§¢$iﬁ$ﬁw¢¢$L IEI : LLLu L L: we ’2 use: (Lad ANODE 5an A 315: on SECTION A»A CATHODE SIDE A ‘ L 25:: as N L am LL'L ‘44: an: ' oooooooocooooo -/ \_ IEIEIEEHEIEHEI‘

Tape and Reel - B90 Package

8.00±0.10

.315±.004

2.00±0.10

.079±.004

4.00±0.05

.157±.002

1.50

0.10

0.00

.059

.004

.000

1.50±0.10

.059±.004

1.75±0.10

.069±.004

5.50±0.05

.217±.002

12.00±0.20

.472±.008

CATHODE SIDE

ANODE SIDE

3.60±0.10

.142±.004

0.25±0.05

7.0°

SECTION A-A

2.48±0.10

.098±.004

3.67±0.10

.144±.004

7.0°

SECTION B-B

TOP VIEW

DETAIL D

178

.512

2.00

.079

21.3

.839

16.0

.630

120°

DETAIL C

12.4

.488

3.0

3.8

560

22.0

NOTES:

FINAL TAPE AND REEL PACKAGING MUST MEET THE

REQUIREMENTS OF JEDEC-STD-033, LEVEL 2A.

LEAVE 304.8mm [12.00 in] OF TAPE EMPTY FOR LEAD IN

(38 EMPTY POCKETS).

LEAVE 457.2mm [18.00 in] OF TAPE EMPTY FOR TRAILER

(57 EMPTY POCKETS).

MUST COMPLY TO EIA-481-C-2003

UNREELING DIRECTION

Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com

1145 Sonora Court • Sunnyvale, CA 94086

SST-10-Sky Blue Product Datasheet

=LUMINUS SupplierTP a To User TD ETC \ 1c \ Suppner 1p 4. 3 TP 1A ,, Max, Ramp UP am = Tclf a.) T Max Rump Dzwn am = 5 cl: *- L 3 k; 1 ﬂ 4—- —mm¢ Area as — a: D- E a; ts I— 25 Finme 25%: to Peak Time :>

Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com

1145 Sonora Court • Sunnyvale, CA 94086

SST-10-Sky Blue Product Datasheet

Soldering Profile

Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly

Preheat & Soak

Temperature min (Tsmin)

Temperature max (Tsmax)

Time (Tsmin to Tsmax) (ts)

100 °C

150 °C

60-120 seconds

150 °C

200 °C

60-120 seconds

Average ramp-up rate (Tsmax to Tp) 3 °C/second max 3 °C/second max

Liquidous temperature (TL)

Time at liquidous (tL)

183 °C

60-150 seconds

217 °C

60-150 seconds

Peak package body temperature (Tp)* 230 °C ~235 °C 255 °C ~260 °C

Classification temperature (Tc) 235 °C 260 °C

Time (tp) within 5 °C of the specified

classification temperature (Tc)

20 seconds 30 seconds

Average ramp-down rate (Tp to Tsmax) 6 °C/second max 6 °C/second max

Time 25 °C to peak temperature 6 minutes max 8 minutes max

* Tolerance for peak profile temperature(Tp) is defined as a supplier minimum and a user maximum.

** Tolerance for time at peak profile temperature(tp) is defined as asupplier minimum and a user maximum.

(:LUMINus

Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com

1145 Sonora Court • Sunnyvale, CA 94086

SST-10-Sky Blue Product Datasheet

Storage:

1. Before opening the package

The LEDs should be kept at a temperature lower than 40° C and relative humidity lower than 90%. The LEDs should be used within a

year. When storing the LEDs, moisture proof package with absorbent material (silica gel) is recommended.

2. After opening the package

The LEDs should be kept at temperature lower than 30° C and relative humidity lower than 60%. The LEDs should be soldered within

168 hours (7days) after opening the moisture proof package.

If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with moisture proof package

within absorbent material (silica gel). It is also recommended to return the unused LEDs to the original moisture proof package and to

seal the moisture proof package again.

If the moisture absorbent material (silica gel) vapors or expires the expiration date, baking treatment should be performed by using

the following conditions : 60 °C for 20 hours.

The LEDs electrode and leadframe comprise a silver plated copper alloy. The silver surface may be affected by environments. Please

avoid conditions which may cause the LEDs to corrode or discolore. The corrosion or discoloration might lower solderability or affect

optical characteristics.

Please avoid rapid transition in ambient temperature, especially in high humidity environments where condensation can occur.

Static Electricity:

1. The products are sensitive to static electricity, and care should be taken when handling them.

2. Static electricity or surge voltage will damage the LEDs. It is recommended to wear a anti-electrostatic wristband or anti-electrostat-

ic gloves when handling the LEDs.

3. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge volt-

age to the equipment that mounts the LEDs.

Precautions for Use

(:LUMINus

Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com

1145 Sonora Court • Sunnyvale, CA 94086

SST-10-Sky Blue Product Datasheet

History of Changes

Rev Description of Change

01 04/12/2018 Initial Release - Preliminary Specifications

02 06/05/2018 Update forward voltage, lumen output and pictures

03 06/23/2020 Updated “Typical Polar Radiation Plot - B90” on page 5

Luminus Devices Inc. 的 SST-10-SB 规格书

信息

帮助

联系我们

关注我们