KEMET 的 ESD-FPL Series 规格书

E‘ectromc Components KEIl/IEI' CHARGED? ’0’
1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
EMI Cores
ESD-FPL Series Solid Cores for Flat Cables
for High Frequency (Bare)
Benefits
• NiZn≤300MHz(FMbandrange)optionsavailable
• Solid construction
• Widerangeofproductsavailable
• Thinandminimalgapsolutionsavailable
Overview
TheKEMETESD-FPLSeriessolidcoresaredesignedfor
useonflatcables.AwiderangeofNickelZinc(NiZn)
optionsareavailableinbaretypeandallowsfortargetingof
specifichighfrequencyranges.
EMIcoresarepartofafamilyofpassivecomponentswhich
addresstheissuesofnoiseorelectromagneticinterference
(EMI)incircuitsorsystems.
Applications
• Officeequipment
• Homeappliances
• Inkjet printers
• Consumer electronics
• Industrialequipment
• Testandmeasurementequipment
• Medicalequipment
• Audio-visualequipment
ammmc compmm KEIVIEI' cums: .
2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Part Number System
ESD- FPL- 14.5- 3
Series FormType CoreSize
OuterLengthCode(mm)
CoreSize
Thickness(mm)
ESD- Solid SeeTable1 SeeTable1
Core Material and Effective Frequency Range
TherearetwoferritematerialoptionsforKEMET
EMICores:Nickel-Zinc(NiZn)andManganese
Zinc(MnZn).Eachcorematerialhasadifferent
resistanceandeffectivefrequencyrange.The
MnZn core material has a lower resistance
comparedtotheNiZn;therefore,adequate
insulationisrequiredbeforeuse.
TheNiZncorematerialistypicallyeffectivefor
frequenciesintheMHzbandrangesuchasthe
FM-band,whiletheMnZncorematerialistypically
effectiveforthekHzbandrangesuchastheAM-
band.SeeFigure1.
It is recommended to measure the actual
frequencyrangeeffectivenessinthetarget
application.
Impedance (Ω)
Frequency (MHz)
AM band range FM band range
Mn-Zn series core
Ni-Zn series core
1,000
100
10
1
0.01 0.1 1 10 100 1,000
Figure 1 – Effective band range of Mn-Zn and Ni-Zn ferrite core material.
(Representative example, measured with same-dimension ring core)
CHARGED!
3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Magnetic Permeability of Ferrite Material
Inordertoachievemostefficientnoisereduction,itisimportanttoselectthematerialaccordingtothetargetfrequency
band.Dependingonitsmagneticpermeability,aparticularferritematerialwillbeeffectiveinacertainfrequencyband.
Aschematicrepresentationoftherelationshipbetweenthemagneticpermeabilityofeachmaterialandthecorresponding
effectivebandrangeisshowninFigure1.Materialswithhighermagneticpermeabilityareeffectiveinthelowerfrequency
range,whilethosewithlowermagneticpermeabilityareeffectiveinthehigherfrequencyrange.Thus,Mn-Znproductsare
mainlyusedforreducingconductionnoise,whileNi-Znproductsarecommonlyusedforradiationnoisecountermeasures.
Theeffectivefrequencyrangevariesdependingoncoreshape,sizeandnumberofwindings.Thisfrequencydependence
ofthemagneticpermeabilityasshowninthefigureservesforreferencepurposesonlyanditshouldbetestedontheactual
devicetodetermineitseffectiveness.
S18H,S15H,10H,7H,5H,1400Land700LareKEMET’sproprietaryferritematerialnames.
Othermaterialscanalsobeavailableonrequest.
Figure 2 - Relationship between the magnetic permeability of each material and its effective frequency range
10 kHz
0
10,000
20,000
100 kHz 1 MHz 10 MHz 100 MHz 1 GHz
Effective Frequency Range
Magnetic Permeability
Ni-Zn Series
1400L
700L
S18H
S15H
10H
7H
5H
Mn-Zn Series
Lower magnetic permeability:
Higher noise suppression effect
in the higher frequency range
Higher magnetic permeability:
Higher noise suppression effect
in the lower frequency range
ammm Compancnls KEIVI EHARGED! \\ o C 4L4
4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Environmental Compliance
AllKEMETEMIcoresareRoHScompliant.
Dimensions – Millimeters
Figure 1 Figure 2 Figure 3
See Table 1 for dimensions
Installation Example
Emmem Compancnls KEIVIEI' manna): esawws-a 155205 n 0107 zmeaz 3am: nxngnls 33a we we namea mmype x 7 7mm EswPL-us-s usgrn m 01H 2752M 50:05 Human 39a we we namea mmype x 7 7mm esawL-us-a usgrn m 01H 2752M 30:05 Human aza we we namea mmype x 7 7mm Esn-FPL-Ms-m I552“ m 01H 2752M “10205 aaasaza aza we we namea mmype x 7 7mm EsD-FPHs-u Iangns u seas asea3 ‘zaeaa nasgnls 3w aeme namea x 7 7mm ESD-FPL-uH mnun ungna sngnt 30:05 Inngnln zaa meme namea x 7 7mm ESD-FPLm-u Ia ngrn ungn s sngn 3 ‘zaea 3 I aaeam a za we we namea x 7 7mm ESD-FPHN-a mm lingna 2752M 30:05 amaza 350 we we namea mmype x 7 7mm Esn-rPL-mmz mm lingna 2752M ‘zngns amaza saa we we namea mmype x 7 7mm esawL-zu-a 13 ago a Ham 7 sngn 3 a 0:0 3 a Bum 3a 3 sa we we namea x 7 7mm ESD-FPHZ 23am ”8205 sagas lingna Hum sa aaa meme namea x 7 7mm ESD-FPl-ZAS-x zosm a znngnx aseas 30:05 naagaza man we we namea x 7 7mm esawL-zs-m 25 m 9 13 ago a sngn s 31 aea s a 35m 35 s7a meme namea x 7 7mm esawL-zv-a 27ml a 22 an 7 s s :U 3 a a :0 z I 3aeam a :a meme namea x 7 7mm Esn-FPH mama z3sgas 77m vasas Isngnzs saa meme namez x 7 7mm ESD-FPHS mums 23am 77m "6204 Isngnzn mu meme namez x 7 7mm ESD»FPL-ZB-ID 230130 Zing“ 50205 “10205 aaaoasa,-a3a 71a we we namea x 7 7mm Esn-rPL-az-a 3102M) 23mm 50:03 B0103 nxngnls m we we namea x 7 7mm ESn7FPL-32-‘2 3102M) 23mm 50:03 ‘zaea3 nxngnls 7w we we namea x 7 7mm ESIHPL-ZMZ 33 zm a 27ml a a 02M 31 aea s ‘sngn an 31 za zaeme namea x 7 mm s son MN: (m hand range)
5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Performance Characteristics
Item Performance Characteristics
Operatingtemperature −25°Cto+85°C
Frequencyrange Highfrequency
Outerlength 14.5 – 80.0 mm
Outer width 2.75 – 12.0 mm
Innerlength 11.0 – 68.6 mm
Inner width 0.7 – 2.2 mm
Thickness 3.0 – 15.0 mm
Type Bare
Material NiZn 700L
Table 1A – Ratings & Part Number Reference
1 Frequency range is for reference only. Please test with actual device before use.
* Other sizes available on request. Please contact KEMET.
Part
Number
Dimensions (mm) Weight
Applicable
Cable Shape Remarks
Frequency
Range1Material
A B C D E (g) ≤ 300 MHz
(FM band range) MnZN NiZn
ESD-FPL-14.5-3
14.5 ±0.5
11.0 ±0.7
2.75 ±0.3
3.0 ±0.3
0.80 ±0.15
3.80
FPC, FFC
Figure3
Thintype
–
700L
ESD-FPL-14.5-5
14.5 ±0.7
11.0 ±0.8
2.75 ±0.4
5.0 ±0.5
0.80 ±0.30
3.90
FPC, FFC
Figure3
Thintype
–
700L
ESD-FPL-14.5-8
14.5 ±0.7
11.0 ±0.8
2.75 ±0.4
8.0 ±0.5
0.80 ±0.30
4.20
FPC, FFC
Figure3
Thintype
–
700L
ESD-FPL-14.5-10
14.5 ±0.6
11.0 ±0.8
2.75 ±0.4
10.0 ±0.5
0.80 ±0.20
4.20
FPC, FFC
Figure3
Thintype
–
700L
ESD-FPL-16-12
16.0 ±0.5
11.5 ±0.3
4.5 ±0.3
12.0 ±0.4
0.85 ±0.15
3.40
8 Core
Figure3
–
700L
ESD-FPL-18-8
18.0 ±1.0
14.0 ±0.6
5.0 ±0.4
8.0 ±0.5
1.00 ±0.20
2.90
10 Core
Figure3
–
700L
ESD-FPL-18-12
18.0 ±0.7
14.0 ±0.5
5.0 ±0.3
12.0 ±0.3
1.00 ±0.15
8.20
FPC, FFC
Figure3
–
700L
ESD-FPL-18.7-3
18.7 ±0.6
15.0 ±0.6
2.75 ±0.4
3.0 ±0.5
0.70 ±0.20
3.40
FPC, FFC
Figure3
Thintype
–
700L
ESD-FPL-18.7-12
18.7 ±0.6
15.0 ±0.6
2.75 ±0.4
12.0 ±0.5
0.70 ±0.20
6.00
FPC, FFC
Figure3
Thintype
–
700L
ESD-FPL-21-8
21.0 ±0.8
17.0 ±0.7
5.0 ±0.3
8.0 ±0.3
0.80 ±0.30
3.50
FPC, FFC
Figure3
–
700L
ESD-FPL-13
23.8 ±0.7
18.8 ±0.5
6.3 ±0.5
15.0 ±0.6
1.10 ±0.50
9.30
13 Core
Figure3
–
700L
ESD-FPL-24.5-8
24.5 ±1.0
20.0 ±0.8
4.5 ±0.5
8.0 ±0.5
0.90 ±0.20
6.60
FPC, FFC
Figure3
–
700L
ESD-FPL-25-12
25.0 ±0.9
21.0 ±0.8
5.0 ±0.5
12.0 ±0.6
0.85 ±0.35
5.70
16 Core
Figure3
–
700L
ESD-FPL-27-8
27.0 ±1.0
22.0 ±0.7
6.5 ±0.3
8.0 ±0.2
1.30 ±0.15
8.40
16 Core
Figure3
–
700L
ESD-FPL-7
28.0 ±0.6
23.5 ±0.5
7.7 ±0.3
7.0 ±0.6
1.50 ±0.25
5.80
16 Core
Figure2
–
700L
ESD-FPL-15
28.0 ±0.5
23.0 ±0.4
7.7 ±0.3
14.6 ±0.4
1.50 ±0.20
12.40
16 Core
Figure2
–
700L
ESD-FPL-28-10
28.0 ±1.0
24.0 ±0.8
5.0 ±0.5
10.0 ±0.5
0.80+0.50,-0.30
7.20
FPC, FFC
Figure3
–
700L
ESD-FPL-32-8
32.0 ±1.0
28.0 ±0.7
5.0 ±0.3
8.0 ±0.3
0.80 ±0.15
5.40
FPC, FFC
Figure3
–
700L
ESD-FPL-32-12
32.0 ±1.0
28.0 ±0.7
5.0 ±0.3
12.0 ±0.3
0.80 ±0.15
7.40
FPC, FFC
Figure3
–
700L
ESD-FPL-20-12
33.2 ±1.0
27.0 ±1.0
8.0 ±0.6
12.0 ±0.6
1.50 ±0.60
12.20
20 Core
Figure3
–
700L
Part
Number
A B C D E (g) Applicable
Cable Shape Remarks
MnZn NiZn
Dimensions Weight Frequency Range1Material
5.515550 05.55555”; KEIVIEI' 05.75.3050: 530 55.20 .5 33 210 0 270 10 0 0 0 10 5 .5 0 10 4 .5010 50 .5 40 2005.5 5.50.53 x 1 700. 550 55.33 5 0 33 51. 0 27510 0 5 510 5 0 0 10 4 .5010 50 700 2005.5 5.50.53 x 1 700. 550 55.34 .5 30 0 1. 0 30 010 7 5 0 103 .5 0 10 3 0 0010 .5 .2 50 550 550 5.50.53 x 1 7000 550550350 3501.5 3001... 00105 00100 .3010 35 040 22 05.5 5.50.53 x 1 700. 550 550.5 370 10 0 25410 0 .2 0 104 .2 710 4 .0010 20 24 00 .505.5 5.50.5. x 1 700. 550 55.30 .2 30 0 1. 2 34 010 0 50 10 5 .2 010 5 0 00 10 30 0 00 550 550 5.50.53 x 1 700. 550 55.30 5 0 30 51. 2 35 010 0 a 0 10 5 0 0 10 5 0 00 10 25 750 550 550 5.50.53 x 1 700. 550 55. 30 5 .2 30 51. 2 35 010 0 a 0 10 5 .2 010 5 0 00 10 30 0 50 550 550 5.50.53 x 1 700. 550 55.40 .0 40 0 1. 5 30 0 1. 0 5 510 5 .0 0 10 5 .3010 30 0 00 2505.5 5.50.53 x 1 700. 550 55.40 .2 40 0 1. 5 30 0 1. 5 5 510 5 .2 0 10 0 .3010 55 500 2505.5 5.50.53 x 1 700. 550 55.40 .5 40 0 1. 0 30 0 1. 0 5 510 5 .5 0 10 5 .3010 25 770 2505.5 5.50.53 x 1 700. 550 55.25 4. 2 1. 0 35 0 1. 0 7710 5 .5 0 10 4 .5010 50 .0 20 2505.5 5.50.53 x 1 7000 550555005 250 45 21. 2 40 0 1. 0 5 5 10 5 0 0 10 5 .30 10 30 0 50 30 05.5 5.50.53 x - 7000 5505504542 4521. 0 4001. 0 55105 .20105 .5010 00 .370 3005.5 5.50.53 x - 7000 55055049542 0051. 2 4451. 0 55107 .20105 .3010 00 050 3205.5 5.50.53 x - 7000 5505550575.2 5751. 2 5201. 0 55100 .20107 .3010 70 000 40 05.5 5.50.53 x - 7000 55055034 500100 005100 .20100 .27105 22010 30 3770 34 05.5 5.50.5. x - 7000 550555050 0001.0 5051. 0 .20100 .27105 .0010 30 5. 20 50 05.5 5.50.5. x - 7000 5 3M M"! (m band .5050) 550 550.0 5 .0 0 .5 0 500 5 .00 550,550 5.50.53 530 550.0 7 7 .0 7 .5 0 2 75 7 0 70 550,550 5.50.53 70.....55 550 550.0 7 .0 .0 7 .5 0 2 75 .0 0 70 550,550 5.50.53 70.....55 550 550.0 7 .2 .0 7 .5 0 2 75 .2 0 70 550,550 5.50.53 70.....55 530 55.2. 5 0 2.5 .5 5 5 50 0 . 30 .2 05.5 5.50.53 550 55.23 0 7 23 0 .0 0 5 30 7 . .0 .2 05.5 5.50.53 550 55.25 0 20 0 .0 0 5 50 0 . 30 .4 05.5 5.50.53 550 55.25 5 5 24 5 20 0 a 50 5 0 00 550,550 5.50.53 550 55.3. 0 3. 0 270 500 0 0 55 550 5.50.53 0......55. 555..55 550 55.3. .2 3. 0 270 500 .2 0 55 550 5.50.53 0......55. 555..55 550 55.33 5 .0 33 5 275 5 50 .0 . 30 2005.5 5.50.53 550 55.33 5 .2 33 5 275 5 50 .2 . 30 2005.5 5.50.53 550 55.35 5 35 0 30 0 0 00 5 . 30 2205.5 5.50.53
6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Table 1A – Ratings & Part Number Reference cont.
1 Frequency range is for reference only. Please test with actual device before use.
* Other sizes available on request. Please contact KEMET.
Table 1B – Not for New Design Ratings & Part Number Reference
Part
Number
Dimensions (mm) Applicable
Cable Shape Remarks
A B C D E
ESD-FPL-18-6
18.0
14.0
5.00
6
1.00
FPC, FFC
Figure3
ESD-FPL-18.7-7
18.7
15.0
2.75
7
0.70
FPC, FFC
Figure3
Thintype
ESD-FPL-18.7-10
18.7
15.0
2.75
10
0.70
FPC, FFC
Figure3
Thintype
ESD-FPL-18.7-12
18.7
15.0
2.75
12
0.70
FPC, FFC
Figure3
Thintype
ESD-FPL-21.5-8
21.5
16.5
6.50
8
1.30
12 Core
Figure3
ESD-FPL-23.8-7
23.8
18.8
6.30
7
1.10
12 Core
Figure3
ESD-FPL-24-8
24.0
19.0
6.50
8
1.30
14 Core
Figure3
ESD-FPL-24.5-6
24.5
20.0
4.50
6
0.90
FPC, FFC
Figure3
ESD-FPL-31-9
31.0
27.0
5.00
9
0.55
FPC
Figure3
Minimalgaptype
ESD-FPL-31-12
31.0
27.0
5.00
12
0.55
FPC
Figure3
Minimalgaptype
ESD-FPL-33.5-10
33.5
27.5
6.50
10
1.30
20 Core
Figure3
ESD-FPL-33.5-12
33.5
27.5
6.50
12
1.30
20 Core
Figure3
ESD-FPL-35-5
35.0
30.0
8.00
5
1.30
22 Core
Figure3
Part
Number
A B C D E Applicable
Cable Shape Remarks
Dimensions
Part
Number
Dimensions (mm) Weight
Applicable
Cable Shape Remarks
Frequency
Range1Material
A B C D E (g) ≤ 300 MHz
(FM band range) MnZN NiZn
ESD-FPL-20-15
33.2 ±0.8
27.0 ±0.8
8.0 ±0.5
15.0 ±0.4
1.50 ±0.50
15.40
20 Core
Figure3
–
700L
ESD-FPL-33.5-8
33.5 ±1.0
27.5 ±0.8
6.5 ±0.5
8.0 ±0.4
1.50 ±0.40
7.00
20 Core
Figure3
–
700L
ESD-FPL-34-15
34.0 ±1.0
30.0 ±0.7
6.0 ±0.3
15.0 ±0.3
0.80 ±0.15
12.60
FPC, FFC
Figure3
–
700L
ESD-FPL-35-8
35.0 ±1.5
30.0 ±1.0
8.0 ±0.5
8.0 ±0.8
1.30 ±0.35
8.40
22 Core
Figure3
–
700L
ESD-FPL-16
37.0 ±0.8
25.4 ±0.8
12.0 ±0.4
12.7 ±0.4
1.90 ±0.20
24.90
16 Core
Figure1
–
700L
ESD-FPL-38-12
38.0 ±1.2
34.0 ±0.8
5.0 ±0.5
12.0 ±0.5
0.80 ±0.30
8.80
FPC, FFC
Figure3
–
700L
ESD-FPL-38.5-8
38.5 ±1.2
35.0 ±0.8
4.0 ±0.5
8.0 ±0.5
0.80 ±0.25
7.50
FPC, FFC
Figure3
–
700L
ESD-FPL-38.5-12
38.5 ±1.2
35.0 ±0.8
4.0 ±0.5
12.0 ±0.6
0.80 ±0.30
8.50
FPC, FFC
Figure3
–
700L
ESD-FPL-40-10
40.0 ±1.5
34.8 ±1.0
6.5 ±0.5
10.0 ±0.5
1.30 ±0.30
8.00
26 Core
Figure3
–
700L
ESD-FPL-40-12
40.0 ±1.5
34.8 ±1.5
6.5 ±0.5
12.0 ±0.8
1.30 ±0.55
6.90
26 Core
Figure3
–
700L
ESD-FPL-40-15
40.0 ±1.0
34.8 ±1.0
6.5 ±0.5
15.0 ±0.6
1.30 ±0.25
7.70
26 Core
Figure3
–
700L
ESD-FPL-26
41.2 ±1.0
35.0 ±1.0
7.7 ±0.6
15.0 ±0.4
1.50 ±0.40
18.20
26 Core
Figure3
–
700L
ESD-FPL-45.2-8
45.2 ±1.2
40.0 ±1.0
6.5 ±0.5
8.0 ±0.5
1.30 ±0.30
8.50
30 Core
Figure3
–
700L
ESD-FPL-45-12
45.2 ±1.0
40.0 ±1.0
6.5 ±0.6
12.0 ±0.6
1.50 ±0.40
13.70
30 Core
Figure3
–
700L
ESD-FPL-49.6-12
49.6 ±1.2
44.5 ±1.0
6.5 ±0.7
12.0 ±0.5
1.30 ±0.40
8.50
32 Core
Figure3
–
700L
ESD-FPL-57.6-12
57.6 ±1.2
52.0 ±1.0
6.5 ±0.8
12.0 ±0.7
1.30 ±0.70
8.80
40 Core
Figure3
–
700L
ESD-FPL-34
60.0 ±0.8
48.5 ±0.8
12.0 ±0.8
12.7 ±0.5
2.20 ±0.30
37.70
34 Core
Figure1
–
700L
ESD-FPL-50
80.0 ±1.0
68.6 ±1.0
12.0 ±0.8
12.7 ±0.5
1.90 ±0.30
51.20
50 Core
Figure1
–
700L
Part
Number
A B C D E (g) Applicable
Cable Shape Remarks
MnZn NiZn
Dimensions Weight Frequency Range1Material
ESD-FPL-18-12 man man ma Impedance (9) m w 100 1000 Frequency (MHz) ESD-FPL-18.7-12 moo é [Winn-(n1 E Frequent-1104M!) ESD-FPL-13 Iowa man we Impedance (0) 1a mm III we Frequency (MHz) EIucuomc compo-mu KEIVIEI' cumin: ESD-FPL-18.7-3 wow 3 Impedance (0) 5; I0 mo 1000 Frequency (MHz) ESD-FPL-21-8 wzxx: A1000 9 8 5 ma '6 a) :1 E m I I 10 we moo Frequency (MHz) ESD-FPL-24.5-B WOOD E Impedance (0) é 8 mm I0 ‘00 Frequency (MHz)
7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Impedance vs. Frequency
ESD-FPL-25-12 wow Arena 9 a) E we an 'o m n. g m 1 1 w 100 1000 Frequency (MHz) ESD-FPL-7 moan Amen E 8 5 ma u an a. g m r I to ma woo Frequency (MHz) ESD-FPL-28-10 moan A1000 9 a) 8 mo no 3 a. E ‘0 mo mo ‘0 Frequency (MHz) E‘ucuomc compo-mu KEIVIEI' cumin: ESD-FPL-27-8 wow A 1000 9 a) g “X! N 'u 0 :1 E m ‘ I ‘0 “X! ‘W Frequency (MHz) ESD-FPL-15 10000 A‘OOO 9 8 g “)0 'u S. E In I r m we won Frequency (MHz) ESD-FPL-32-8 10000 A 1000 9 § (V we u a) Q E w ma mm 10 Frequency (M Hz)
8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Impedance vs. Frequency cont.
ESD-FPL-32-12 wouu Amen 9 8 E me u S E w r r m 100 men Frequency {MHz} ESD-FPL-20-15 moan Amen Q 8 a mo 8 a E w 1 r m we won Frequency (MHz) ESD-FPL-34-15 moon Arm 9 8 g mu 1: 8 5 we muu W Frequency (MHz) E‘ucuomc compo-mu KEIVIEI' cumin: ESD-FPL-20-12 wow 1000 100 Impedance (0) w m me man Frequency (MHz) ESD-FPL-33.5-8 room A “xx: 9 8 g “X! 8 a. E m ‘ ‘ ID 100 WOO Frequency (MHz) ESD-FPL-35—8 10000 A 1000 9, 8 g Inn E room 10 100 Frequency {MHz)
9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Impedance vs. Frequency cont.
Impedance (0) Impedance (0) ESD-FPL-16 wow 1000 we w W 100 WOO Frequency (MHz) ESD-FPL—38.5-8 Iowa A1000 9 § me i? 2. E w r r m we woo Frequency (MHz) ESD-FPL-40-10 wow row «on 10 um m we Frequency (MHz) E‘ucuomc compo-mu KEIVIEI' cumin: ESD-FPL-38-12 moon was Impedance (0) 8 m we moo Frequency (MHz) ESD-FPL-38.5—12 moan A won 9 8 E 100 '0 a E w ‘ I ‘0 ‘00 won Frequency (MHz) ESD-FPL-40-12 10000 A 1000 g 8 g m0 u 3 E w we moo m Frequency (MHz)
10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Impedance vs. Frequency cont.
ESD-FPL-40-15 mom Ame Q 8 g ma 3 a. g m r r lo we moo Frequency (MHz) ESD-FPL-45.2-8 mom Arm 9 8 5 ma 'u a: a. g m r 1 m we uxx: Frequency (MHZ) ESD-FPL-49.6-12 mom Arm 9 8 g ma g mm ‘0 100 Frequency (MHz) E‘ucuomc Compcnonu KEIVIEI' cumin: ESD-FPL-26 rowo A1000 9 8 g «on E m 1 1 10 mo moo Frequency (MHz) ESD-FPL-45-12 moon A won 9 8 5 we 1: 3 g m r 1 m we won Frequency (MHZ) ESD-FPL-57.6-12 Iowa 1000 Impedance (0) é E mo woo ‘0 Frequency (MHz)
11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Impedance vs. Frequency cont.
ESD-FPL-34 moon 1000 E‘ucuomc Compcnonu KEIVIEI' CHARGED! ESD-FPL-50 moan A A man 9 g 8 8 5“ we 5 mo 1: 1: g 3 E w E w 1 1 ‘ m we won ‘ m we won Frequency (MHZ) Frequemy (MHZ) ESD-FPL-18-5 ESD-FPL-18.7-7 um um hwdmouq 8 1o Fremont); (W1) ESD-FPL-18J-10 mono «m Impedmca (0) § 3 won vo Ian Frequency (MHz) IW (q S 8 I II «I «u FWW) ESD-FPL-18.7-12 1m woo
12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Impedance vs. Frequency cont.
Impedance vs. Frequency - Not for New Design
ESD-FPL-21 .58 um E I“ a i no 5 w 1 I I. MD I” FWWM ESD-FPL-24-8 no mo III laud-mam) 10 1” on m MW 0M!) ESD-FPL-31-9 m IW (n) i 3 W M11) ESD-FPL-23.8-7 w W (n) 1m m I. w m W M” ESD-FPL-24.5-6 m IW (I? no ‘0 IO) FWW-‘Y 0M!) ESD-FPL-51-12 m Invert-no. (a) lo In I” Fuel-WM!) E‘ucuomc Compcnonu KEIWEI' CHARGED! low 1”
13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Impedance vs. Frequency - Not for New Design cont.
ESD-FPL-33.5-1 0 m I” mud-m- (q 8 8 ‘0 I“ ‘m Fromm (um) ESD-FPLea. 5-12 I“ 1” 1.0 mm) mo I0 I” Pam-wt (NH!) E‘ucuomc Compcnonu KEIVIEI' CHARGED! ESD-FPLea. 5-12 I“ 1” 1.0 mm) mo I0 I” Pam-wt (NH!)
14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Impedance vs. Frequency - Not for New Design cont.
E‘Icunmc Companm; KEIVIEI' cums: .
15© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Packaging
Part Number Packaging Type Pieces per Box
ESD-FPL-14.5-3
Tray
8,100
ESD-FPL-14.5-5 5,040
ESD-FPL-14.5-8 3,240
ESD-FPL-14.5-10 2,700
ESD-FPL-16-12 1,650
ESD-FPL-18-8 2,000
ESD-FPL-18-12 1,800
ESD-FPL-18.7-3 5,760
ESD-FPL-18.7-12 1,800
ESD-FPL-21-8 2,400
ESD-FPL-13 840
ESD-FPL-24.5-8 1,800
ESD-FPL-25-12 1,600
ESD-FPL-27-8 960
ESD-FPL-7 900
ESD-FPL-15 720
ESD-FPL-28-10 1,200
ESD-FPL-32-8 960
ESD-FPL-32-12 720
ESD-FPL-20-12 800
ESD-FPL-20-15
ESD-FPL-33.5-8 1,200
ESD-FPL-34-15 320
ESD-FPL-35-8 880
ESD-FPL-16 656
ESD-FPL-38-12 900
ESD-FPL-38.5-8 1,500
ESD-FPL-38.5-12 1,125
ESD-FPL-40-10 750
ESD-FPL-40-12 540
ESD-FPL-40-15 480
ESD-FPL-26 960
ESD-FPL-45.2-8 880
ESD-FPL-45-12 720
ESD-FPL-49.6-12 540
ESD-FPL-57.6-12 480
ESD-FPL-34 240
ESD-FPL-50 180
ammmc compmm KEIVIEI' cumin:
16© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
Handling Precautions
EMICoresshouldbestoredinnormalworkingenvironments.WhiletheEMICoresthemselvesarequiterobustinother
environments,avoidexposuretohightemperatures,highhumidity,corrosiveatmospheresandlongtermstorageforcase,
snap-onandsplittypes.
KEMETrecommendsthatmaximumstoragetemperaturenotexceed40°Candmaximumstoragehumiditynotexceed75%
relativehumidity.Atmospheresshouldbefreeofchlorine,sulfurandalkalibearingcompounds.Avoidalsostoragenear
strongmagneticfieldsasthismightmagnetizetheproduct.
Temperaturefluctuationsshouldbeminimizedtoavoidcondensationorcracksontheparts.Mechanicalshockscanbring
to cracks as well.
Export Control
For customers in Japan
Forproductsthatarecontrolleditemssubjecttothe“ForeignExchangeandForeignTradeLaw”ofJapan,theexportlicense
specifiedbythelawisrequiredforexport.
For customers outside Japan
EMICoreproductsshouldnotbeusedorsoldforuseinthedevelopment,production,stockpilingorutilizationofany
conventionalweaponsormass-destructiveweapons(nuclearweapons,chemicalorbiologicalweapons,ormissiles),orany
other weapons.
ammmc compmm KEIVIEI' cumin:
17© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5004_ESD-FPL • 3/31/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
EMI Core – ESD-FPL Series Solid Cores for Flat Cables for High Frequency (Bare)
KEMET Electronics Corporation Sales Offi ces
Foracompletelistofourglobalsalesoffices,pleasevisitwww.kemet.com/sales.
Disclaimer
Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor
checkingandverifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced.AllInformationgiven
hereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuch
applications,butarenotintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.
TheInformationisintendedforuseonlybycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.Any
technicaladviceinferredfromthisInformationorotherwiseprovidedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesno
obligationorliabilityfortheadvicegivenorresultsobtained.
AlthoughKEMETdesignsandmanufacturesitsproductstothemoststringentqualityandsafetystandards,giventhecurrentstateoftheart,isolatedcomponent
failuresmaystilloccur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards
(suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjuryor
propertydamage.
Althoughallproduct–relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatother
measuresmaynotberequired.
WhenprovidingKEMETproductsandtechnologiescontainedhereintoothercountries,thecustomermustabidebytheproceduresandprovisionsstipulatedinall
applicableexportlawsandregulations,includingwithoutlimitationtheInternationalTrafficinArmsRegulations(ITAR),theUSExportAdministrationRegulations
(EAR)andtheJapanForeignExchangeandForeignTradeAct.
KEMET is a registered trademark of KEMET Electronics Corporation.