Techspray 的 1814-1825 规格书

No-Clean Desoldering Braid Techsp anetl prnpe mm \nwe (mar mm 4 ( 05 Slxechzn: mam» colorcode wmmun) whflhlmmi cu White 0.035 0.9 :12 Vellow 0.055 1.4 :14 Blue 0.095 2.5 as Red 0.193 4.9 Data Sheet m A ms/zs/ Pugcl on Slandam Spoals T s For addmnna‘ (echm produc s m (ha mm 4043, emawl tsal www.mchsgray com Impo base We eve CD ah be 59 n % TEGHSPRAY‘
No-Clean Desoldering Braid
Product# 1814-1825
Product Description
Techspray® No-Clean wick does not leave behind ionic flux residues that can
collect and form branches called “dendrites”. Other fluxes, if not cleaned
properly, can cause dendrites that grow over time and eventually cause short
circuits between traces or leads. Latent failures lead to costly returns and
lower the quality perception of your products. Available in anti-static spools
(marked with "AS" below) to prevent static build-up from damaging sensitive
components. Specifications: Meets or Exceeds MIL-F-14256; NASA NHB 5300,
4 (34-1); NASA NPC 200-4; NASA SP5002; 1821:HP 8690-0588; 1823: HP 8690-
0577; IPC Standard-J-STD-004
Size chart:
Braid #
Color Code
Width (in)
Width (mm)
#1
White
0.035
0.9
#2
Yellow
0.055
1.4
#3 Green 0.075 1.9
#4
Blue
0.098
2.5
#5
Brown
0.130
3.3
#6
Red
0.193
4.9
Features / Benefits
• No-clean flux coated braid
• Cleanest wick - clear, non-reactive residues
• Will not leave ionic residue -- avoid dendrite failure
• Exceeds MIL-F-14256
Environmental Policy
Techspray® is committed to developing products to ensure a safer and cleaner
environment. We will continue to meet and sustain the regulations of all
federal, state and local government agencies.
Resources
Techspray® products are supported by global sales, technical and customer
services resources.
For additional technical information on this product or other Techspray®
products in the United States, call the technical sales department at 800-858-
4043, email tsales@techspray.com or visit our web site at:
www.techspray.com.
Important Notice to Purchaser/User: The information in this publication is
based on tests that we believe are reliable. The results may vary due to
differences in tests type and conditions. We recommend that each user
evaluate the product to determine its suitability for the intended application.
Conditions of use are outside our control and vary widely. Techspray’s only
obligation and your only solution is replacement of product that is shown to
be defective when you receive it. In no case will Techspray® be liable for any
special, incidental, or consequential damages based on breach of warranty,
negligence or any other theory.
Packaging and Availability
Part# Size# Size Color Length ESD-safe Bobbin
Standard Spools
1814-100F #1 White 100ft (30.5M) No
1815-5F #2 Yellow 5ft (1.5M) No
1815-10F #2 Yellow 10ft (3M) No
1815-100F #2 Yellow 100ft (30.5M) No
1816-5F #3 Green 5ft (1.5M) No
1816-10F #3 Green 10ft (3M) No
1816-50F #3 Green 50ft (15.2M) No
1816-100F #3 Green 100ft (30.5M) No
1817-5F #4 Blue 5ft (1.5M) No
1817-10 #4 Blue 10ft (3M) No
1817-100F #4 Blue 100ft (30.5M) No
ESD-Safe Spool
1820-5F #1 White 5ft (1.5M) Yes
1820-10F #1 White 10ft (3M) Yes
1820-50F #1 White 50ft (15.2M) Yes
1821-5F #2 Yellow 5ft (1.5M) Yes
1821-10F #2 Yellow 10ft (3M) Yes
1821-25F #2 Yellow 25ft (7.6M) Yes
1821-50F #2 Yellow 50ft (15.2M) Yes
1822-5F #3 Green 5ft (1.5M) Yes
1822-10F #3 Green 10ft (3M) Yes
1822-50F #3 Green 50ft (15.2M) Yes
1822-100F #3 Green 100ft (30.5M) Yes
1823-5F #4 Blue 5ft (1.5M) Yes
1823-10F #4 Blue 10ft (3M) Yes
1823-25F #4 Blue 25ft (7.6M) Yes
1823-100F #4 Blue 100ft (30.5M) Yes
1824-5F #5 Brown 5ft (1.5M) Yes
1824-25F #5 Brown 25ft (7.6M) Yes
1825-5F #6 Red 5ft (1.5M) Yes
Rev. A (05/18) Page 1 of 1
North America
Techspray®
8125 Cobb Center Drive
Kennesaw, GA 30152
800-858-4043
tsales@techspray.com
Europe
ITW Contamination Control BV
Saffierlaan 5, 2132 VZ Hoofddorp
The Netherlands
+31 88 1307 400
info@itw-cc.com
Countries outside the US
Call to locate a distributor in your
country