Texas Instruments 的 SN54,74(LS,S)85 规格书

11mm WHCAL 7w: POWER DELAV mssmmu Mn womm 'as 275 am 23 n: 1585 52 mW 24 ns :85 365 mw I I M description These four-bk magnitude comparators Dertarm comparison 0' straight hlnlrv and straight BCD (8-4-2-1) codex Threl tully docodod decision: about twu Lbit words (A, B) are made and menemally available at mm outputsc These devices are fully expandable to any numbev 0' hits withoul exlemal gates. Words of gmnter Iength may be compared by connecting comparators in cascade. The A > B‘ A < e,="" and="" a="5" output:="" 0'="" a="" slugs="" handling="" less-significant="" bits="" are="" connected="" tn="" the="" conesponding="" a=""> a, A < s,="" and="" a="3" inputs="" of="" the="" nan="" slage="" handling="" more~signi|icant="" bits.="" the="" stage="" handling="" the="" ieasrsignilicant="" blts="" must="" have="" a="" hiqh~leve|="" voltage="" applied="" lo="" the="" a="8" input.="" the="" cascading="" paths="" of="" the="" ’35,="" 1585.="" and="" '585="" am="" implemented="" with="" only="" a="" twe—gute—level="" delay="" to="" induce="" overall="" oompavison="" times="" io:="" long="" words.="" an="" alternate="" method="" af="" cascading="" which="" luflhef="" reduces="" the="" comparison="" time="" is="" shown="" in="" the="" tvptcal="" application="" data.="" snwee="" sums.="" snmsbs="" .="" .="" sit/486="" .="" .="" .="" n="" package="" sn‘iilsss.="" muses="" .="" .="" .="" n="" on="" n="" package="" .="" j="" 05‘="" w="" package="" uoyvnswn="" as="" i="" u16="" vcc="">BinC4 njAz A>BoutE5 Iszi A=BoutE6 ”Elsi ABin I 5 I7IA2 NC I 6 islNc A>Bout I 7 is|A1 A=Boutla uIBI 9m “0000 gzzm< mu="" v="">< nc="" -="" nu="" inwrul="" mun-him!="" function="" iable="" comparing="" cascading="" outputs="" invuts="" inpu‘rs="" a3,”="" a2452="" alb!="" amen="">5 Ae A as x x x x x x H L L A3 < 83="" x="" x="" x="" x="" x="" x="" l="" h="" l="" a2=""> 82 x x x x x H L L A2 < e2="" x="" x="" x="" x="" x="" l="" n="" l="" a2="32" al=""> Bl X x x x H L L A2 = 52 Ai < m="" x="" x="" x="" x="" l="" h="" i.="" a2="82" ai="B!" x="" x="" x="" n="" l="" l="" a2="32" ai="51" x="" x="" x="" l="" n="" l="" a2="" :="" 82="" al="" 2="" el="" h="" l="" l="" h="" l="" l="" a2="" —="" 32="" a1="Bl" l="" h="" l="" l="" h="" i.="" a2="" :="" 52="" ai="51" x="" x="" h="" l="" l="" n="" a2="" -="" 32="" ai="BI" h="" h="" l="" l="" l="" l="" a2="52" av="31" l="" l="" l="" h="" n="" l="" *5="" texas="" instruments="">
SN5485, SN54LS85, SN54S85
SN7485, SN74LS85, SN74S85
4-BIT MAGNITUDE COMPARATORS
SDLS123 – MARCH 1974 – REVISED MARCH 1988
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Copyright 1988, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
logic diagrams (with. logic) logic symbol' A>B 1‘0) (12) (I3) (15) (2) (3) (a) (S! (H) (1‘) (ll 03 COMP o p 3 P< -="" p="O"> P>D U 0 3 17) r— Pa tThis symbol is in lccordancu with ANSI/ISEE Std 91-1584 Ind IEC Publication 51742. Pin numbus shown are my D4 J, N, ma w pack-9e; *9 TEXAS INSTRUMENTS
SN5485, SN54LS85, SN54S85
SN7485, SN74LS85, SN74S85
4-BIT MAGNITUDE COMPARATORS
SDLS123 – MARCH 1974 – REVISED MARCH 1988
2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
schema‘ics of inputs and outputs EQUIVALENT OF EACH INPUT F071 '86 Vcc INPuT A KB,AnVAorB: R. . I.67an0M A >3, (:1 am =4kflNOM EQUIVALEM OF EACH INPUT FOR 1.555 EQUIVALENT or EACH INHJT FOR 'sos Vcc |NPUT A = e, AnonrB: a. = 933 n NOM A > a, < a:="" a”="2.3" m="" nom="" yypical="" or="" all.="" outputs="" yvpical="" or="" ali.="" ouwurs="" tvpical="" of="" all="" ouwuts="" run="" 135="" for="" 1585="" for="" 'ses="" —="" —="" vcc="" —="" -="" vcc="" -_="" v00="" 120m="" nom="" 50="" :1="" mm="" mo="" (2="" nom="" output="" ouqu="" ouyyuy="" absolme="" maximum="" ratings="" over="" operating="" hu»aiv="" tempermuve="" range="" (unless="" otherwise="" nmed)="" 8n5"="" 5'47"="" “545'="" 5n74ls‘="" um?="" su54s‘="" suns="" supply="" voltage.="" vcc="" [sue="" not:="" n="" 7="" 7="" 7="" 7="" v="" input="" vomge="" 5="" 5="" 7="" 5.5="" v="" ‘meremmer="" vokage="" (see="" nam="" 11="" 5="" 5="" 5="" 5="" v="" anvaling="" new"="" [empelamla="" lung:="" 7="" 55="" lo="" 125="" -="" o="" m="" 70="" °c="" star-9e="" lampentun="" ungl="" -55="" m="" 150="" 7="" 65="" w="" 150="" °c="" noyes="" \="" vollage="" value}.="" new="" inlelemiuer="" values,="" are="" wim="" :especx="" m="" nelwork="" 9mm="" mmin-i.="" 2="" mm="" vs="" m.="" voluge="" bum”.="" two="" mums="" ov="" a="" mulnprumum="" inpm="" mns‘mor="" "\is="" mmg="" apulies="" m="" anch="" a="" mum="" fin="" conxuucum="" mm="" a:="" momma="" 3="" mp“:="" ol="" the="" '85="" and="" $55="" *5="" texas="" instruments="">
SN5485, SN54LS85, SN54S85
SN7485, SN74LS85, SN74S85
4-BIT MAGNITUDE COMPARATORS
SDLS123 – MARCH 1974 – REVISED MARCH 1988
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
moomn'mwlod operating conditions susas sunas umr mm NOM MAX MIN MOM MAX Supply volup, vcc 4.5 5 5.5 4.75 5 5.5 v Higmmx outwtwrum, no... —wa 400 M Low-{MI mloutcurrent, um 15 16 mA owningmul- tllnplraturs,TA —55 125 o 70 “c electrical characteristics over recommended operating free-air umwamre range (unless othsrwisa noted) PARAMETER rssr couornous' um Tvrx MAX UNIT v.H Ham”: inpulvolngc 2 v v.._ Law~lml inuut voitage 0.8 v vm Input clamn voluge vac = Mm. 1.: —|2 mA 4.5 v V - MIN V I 2 V v0” Hisn~lwel ouxpm vullag' cc ' m ' 2,4 3.4 v v.._=o.av, v0... =-4qu vac-MIN, v... =2v. v Lo 4: «I o r r on 0.2 0.4 V OL W V “""V 39' v.._-o.8v, IOL-ISmA 1, Input mum: at maximum input voltage vcc = MAX, v. = 5.5 v I mA . . ABinputi 40 I H -| l l l ' V = MA V .4 V A '“ ‘9" M "“1" mm" m om. nputs 0° x, ' 120 “ A —L IIL Low-lml inpul cumm < b'="" a?="" 3="" "mm="" vcc="" -="" max,="" v.="" -="" 0.4="" v="" 6="" ma="" all="" other="" moms="" 4.3="" i="" she="" i="" '="" 1="" §="" v="" max="" v="" o="" snws="" 4°="" 4'5="" a="" 05="" v="" relrcul="" output="" current="" [:9="" ,="" 0="" sm="" 435="" 4'8="" _55="" m="" 'cc="" supply="" curmu="" vcc="" -="" max,="" 5.5="" note="" a="" 55="" 88="" ma="" v‘sor="" mndiuon:="" xhowu="" u="" min="" 0v="" max,="" uu="" m.="" npprapliau="" um="" spcclliod="" undo!="" rmmmnmod="" obit-ting="" condition".="" tan="" (vdicil="" mus="" n="" n="" vcc="" ,="" 5="" v.1-a="25"c," §um="" mou="" mm="" on.="" output="" mama="" a.="" shame="" on="" .="" um.="" n01:="" 4.="" lcc="" .s="" mum”="" wm.="" output$="" ouch,="" a="a" around-4,1na="" all="" mm="" mm="" n="" 4.5="" v.="" switching="" characteristics,="" vcc="5" vi="" ta="25°C" parameter‘="" from="" to="" number="" of="" test="" conditions="" min="" yvi’="" max="" unit="" input="" output="" gave="" levels="" i="" 7="" a="">< e,="" a=""> E 2 ‘2 rpm Any A or B dala Input 3 17 26 "5 A = B 4 23 35 I II [M Anv n or 3 am mpu A < 3'="" a=""> E 2 CL = is 9F. :3 30 ns RL = 400 n, A = B 4 See Note 5 20 30 rpm AB 1 7 II n: xyML AE 1 u I7 n: IVLH A ' B A = B 2 I3 20 n5 «pm A = a A = a 2 I: I? n: (pm A>SorA=B ABOIAIB A
SN5485, SN54LS85, SN54S85
SN7485, SN74LS85, SN74S85
4-BIT MAGNITUDE COMPARATORS
SDLS123 – MARCH 1974 – REVISED MARCH 1988
4POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
recommended operating con ions sususas .91an mm MIN MOM MAX MIN noun MAX Suwly vnklge. Vcc 4.5 5 5.5 4.15 5 5.25 v Hum-lmloummcuvum, no" «no 400 uA Lovrlevel mm" mm", 10L 4 a «1A over-ungmeair umpmmn. TA -55 125 0 70 “c electrical charamn tics ave! recommended operating freeair temperature range (unless Miami” noted) 311541505 311741.555 u AMETER TESY connm f UNIT a 0“ um Wrt MAX MIN mt MAX V.“ High—1m inpmvolwge 2 2 v v.._ Lowlevei mum yolugz 0.1 0.7 v VIK Inpulclnmn vamp- Vcc = um, I. .. >IBmA —1.5 —I.5 v VCC = MIN, vm - 2 v, v H -lwIl um ulvoll: 2,5 3.4 2,7 14 v a” '9” p 9' v.._ : vlL max. IQH - 4110 uA VCC ‘ MW 10L = 4 mA 0.25 04 0.25 0.. VOL Low4m=1 oumuwomge vm x 2 v, v v.‘_ ‘ VIL m“ 101 = 3 am 0.35 0.5 '"V‘" ‘""°"‘ A < a,="" a=""> 8 inputs 0.1 0.1 1. u muimum _ Vcc: MAx. v, e 7v mA "mm you” all omel mam: 0.3 0.3 High-level A < a,="" a=""> 13 moms 20 20 1 v s MAx, v = 2.1 v "" inpul current m emu inputs cc ' 6O 60 “A LowJeuel A < a,="" a=""> e inpm —o.4 414 1m ‘ vcc=MAx. v.=04v mA Input cunem il‘ Omev Inpulx ill vlJ Ios Shovx-civcuil wwu! curvem§ Vcc x MM ,20 —100 —2D -100 mA 'cc Suwly cuvrem Vcc = MAX, See Note 4 my 20 10.4 20 mA 'For cund us shown .1 MIN or MAX, um "I. Jpnronrlalo v-Iu- spamim unduv YOCQmmefldfid opernung condition‘. an mm. mm m... vcc = 5 y, 1A - 25°c, §Na1 mov- man on- mum" should no man-a a1 a firm, and aummn M m. mon-civcun should no! oxcna on. ucond. NOTE 4: 'cc is mm.” mm outnul; Doom A = a umundnd, and .11 on... incuxs n 4.5 1/. switching charac‘evistics, Vcc = 5 V, TA = 25°C M NUMBER OF wAnAMEIEM mo 10 1:51 commons MIN np MAX umr mun ouww ans LEVELS I I4 I A A E d l I A < e‘="" a=""> E 2 ’9 :1: 7L... ny m a a Inpu a 2‘ 36 A x E 4 27 [5 1 H A < b.="" a=""> E 2 l5 IPHL Any A 01 E dam inpul 3 CL = ‘5 9F, ——_20 30 n: n = A . a 4 L “9‘ 23 45 See New 5 mm AB 1 14 22 n: 1.2“ Aa 1 n 17 n: 1pm A=B A=B 2 13 m n; 1pm. A = a A - a 2 1.7 23 m tPLH A>aorA-a ABovA=B A
SN5485, SN54LS85, SN54S85
SN7485, SN74LS85, SN74S85
4-BIT MAGNITUDE COMPARATORS
SDLS123 – MARCH 1974 – REVISED MARCH 1988
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
recommended opera‘ing conditions suasus sunset; MIN Mom MAX MIN MOM MAX "N" Supply volugl, vcc 4.5 s 5.5 4.75 5 5.25 v Hewevel output cumm. IQH —I -1 mA Low-level aumut cunenl, IOL 20 20 mA Operating lmair tnmporlwu, TA —55 I25 0 70 “c electrical characteristia aver recommended operating freeair temperature range (unl ess oflIerwisa noted) FARAMEV’ER TEST CONDITIONS' MIN 7v” MAX UNIY v.“ Hidi-Ievel inwxvohage 2 v vlL WM! inputvnhage 0.3 v v..( Inpm clamp wage Vcc - MIN, I. - —13 mA —I.2 v Vcc 2 MIN, v,“ — v, SNusas 2.5 3.4 V0” WWW" “WWW” vIL - 0.3 v, I0“ - —I mA ansBs 2.7 3.4 V VOL Lmlml oumxvoltan: Vcc I M'“’ V'" E 2 V' 0.5 v VILrOJV, IOL=20mA I. Input amenm maximum inputvoltage Vcc = MAX, v. - 5.5 v I m . . ABmwts 50 I." H 4m: Inwr ourrern l" mu mu“ Vcc - MAX, v. r 2.7 v '50 "A IIL Lmlml 5mm current A < b'="" a=""> 5 my” vcc = MAX v. - 0.5 v '2 am all olher Inputs ’ —e '05 Shm-cimun oumm mums Vcc = MAX .40 —I00 mA vcc - MAX, s" New 4 73 "5 Ice 5-:wa currenl vcc = MAX, TA - I25°c, snsasasw "0 am See Note a 'For conmuons shown as MIN or MAX, use "In Appropru um. mum-d undlr roeamm'ndua opIr-nng mud-nor“. 3AM (vpicnl vain-s Ira u Vcc : 5 v, TA 5 25": mm mm. than on. mm mm a. memo u u urns. and amnion “I the mom lzi'cuir mama not "co-d 0M sacona "or; .. ICC vsmcmrod wun onlouu on». A 7 a around-fl, and .u my... Inpuh a! ms v. switching characteristics, Vcc = 5 V, TA = 25°C rAnAMETEn‘I FROM 1° "um“ 0‘ rest CONDITIONS MIN rvp MAX uNIr INFU" OUYPUY GA‘IE LEVELS I 5 A < e,="" a=""> B 2 7 5 rpm Any A m B dare mom 3 m5 ‘6 as A = a 4 12 I9 I 5.5 A < ia.="" a=""> a 2 7 rpm AnyAurBdaxaInmIl ———:—— CL- ISpF. H ‘65 ns Asa I mason, H 16.5 See More 5 IPLH Aa I 5 7.5 as tpHL A8 I 5.5 8.5 m in); A = a A = a 2 7 10.5 n: lyHL A=B A=E z 5 7.5 ns rpm A>BorA AsarA-a A
SN5485, SN54LS85, SN54S85
SN7485, SN74LS85, SN74S85
4-BIT MAGNITUDE COMPARATORS
SDLS123 – MARCH 1974 – REVISED MARCH 1988
6POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL APPLICATION DATA 1535 24 no 48 ns 72 ns II no 22 ns 33 ns (M53, 3'3”“ 33 COMPARISON or TWO u-mr wonos A23 n 322 82 This application demanstrates how these magnitudo “2 ‘2 comparators can In cascaded to compare longer :21 B1 A < b="" .="" .="" az]="" m="" ‘="" _="" b="" _="" “c="" words.="" the="" example="" illustrated="" shows="" the="" comparison="" we="" ——="" so="" a=""> a of two 24-bit words; however. the design is A20 —— M expandable to nbits. As an example, one comparator 9'9 A< 3="" .5="" can="" he="" used="" with="" live="" of="" the="" 24-bit="" comparators="" l="" "a="" me="" «as="" illuatrated="" to="" axpand="" the="" word="" length="" to="" 1204;:st="" a19="" ‘a=""> a ' . . . . Typlcal comparison tlmas lor various word length: ale on using the '85. ’L585, or ‘585 are: AIS -— M an ‘32 WORD NUMBER A17 A2 LENGTH OF PKGS 35 2": 3‘ if: 1-4 bits 1 23 ns m :2 D a ”c 5-24 hits 2-6 46 ns M5 M, 25-120 bits 8-31 69 ns BI“ A < b="" l="" —="" a="" i="" 8="" 15355="" a14="" a=""> a “‘5' an —— m as Al: N ‘5 an a: 32 A12 —— A2 A2 ourpurs 8‘“ B] A < h="" 51="" a="">< b="" ——="" a"="" ai="" a-a—nc="" r—m="" a-e———="" am="" an="" a=""> a 30 A > a -— A10 —— An AD as a < a="" as="" 2="" f:="" as="" '-="" —“="" a"="" 5="" 1585,="" 'sss="" a9="" a=""> a “'5' 885 A > 3 as as A8 A1 37 an A7 A2 56 m A < 3="" a6="" ai="" a="" “="" e="" —="" nc="" as="" so="" a=""> 3 A5 A0 3“ 1: f: 135 M A > o 15354 885 as as A1 A3 oz 32 A2 A! 3| 3| A < 3="" al="" a1="" a="" i="" i="" use)="" so="" so="" a=""> 3 A0 An L A < b="" '85="" h="" a="" -="" i="" comparison="" of="" ma="" non="" woaos="" l="" a=""> a 1.335, sas {P TEXAS INSTRUMENTS
SN5485, SN54LS85, SN54S85
SN7485, SN74LS85, SN74S85
4-BIT MAGNITUDE COMPARATORS
SDLS123 – MARCH 1974 – REVISED MARCH 1988
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
I TEXAS INSTRUMENTS Samples Samples Samples Samples Samples Samples Samples Samples Samples Samples Samples Samples Samples Samples Samples
PACKAGE OPTION ADDENDUM
www.ti.com 11-Jan-2022
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead finish/
Ball material
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
5962-9754701Q2A ACTIVE LCCC FK 20 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 5962-
9754701Q2A
SNJ54LS
85FK
5962-9754701QEA ACTIVE CDIP J 16 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 5962-9754701QE
A
SNJ54LS85J
5962-9754701QFA ACTIVE CFP W 16 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 5962-9754701QF
A
SNJ54LS85W
JM38510/08201BEA ACTIVE CDIP J 16 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 JM38510/
08201BEA
JM38510/31101B2A ACTIVE LCCC FK 20 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 JM38510/
31101B2A
JM38510/31101BEA ACTIVE CDIP J 16 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 JM38510/
31101BEA
JM38510/31101BFA ACTIVE CFP W 16 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 JM38510/
31101BFA
M38510/08201BEA ACTIVE CDIP J 16 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 JM38510/
08201BEA
M38510/31101B2A ACTIVE LCCC FK 20 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 JM38510/
31101B2A
M38510/31101BEA ACTIVE CDIP J 16 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 JM38510/
31101BEA
M38510/31101BFA ACTIVE CFP W 16 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 JM38510/
31101BFA
SN54LS85J ACTIVE CDIP J 16 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 SN54LS85J
SN54S85J ACTIVE CDIP J 16 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 SN54S85J
SN74LS85D ACTIVE SOIC D 16 40 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LS85
SN74LS85DR ACTIVE SOIC D 16 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LS85
I TEXAS INSTRUMENTS Samples Samples Samples Samples Sample: Sample: Samples Samples Samples Samples
PACKAGE OPTION ADDENDUM
www.ti.com 11-Jan-2022
Addendum-Page 2
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead finish/
Ball material
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
SN74LS85DRE4 ACTIVE SOIC D 16 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LS85
SN74LS85N ACTIVE PDIP N 16 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN74LS85N
SN74LS85NSR ACTIVE SO NS 16 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 74LS85
SN74S85D ACTIVE SOIC D 16 40 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 S85
SN74S85N ACTIVE PDIP N 16 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN74S85N
SNJ54LS85FK ACTIVE LCCC FK 20 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 5962-
9754701Q2A
SNJ54LS
85FK
SNJ54LS85J ACTIVE CDIP J 16 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 5962-9754701QE
A
SNJ54LS85J
SNJ54LS85W ACTIVE CFP W 16 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 5962-9754701QF
A
SNJ54LS85W
SNJ54S85FK ACTIVE LCCC FK 20 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 SNJ54S
85FK
SNJ54S85J ACTIVE CDIP J 16 1 Non-RoHS
& Green SNPB N / A for Pkg Type -55 to 125 SNJ54S85J
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
I TEXAS INSTRUMENTS
PACKAGE OPTION ADDENDUM
www.ti.com 11-Jan-2022
Addendum-Page 3
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6) Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two
lines if the finish value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN54LS85, SN54S85, SN74LS85, SN74S85 :
•Catalog : SN74LS85, SN74S85
•Military : SN54LS85, SN54S85
NOTE: Qualified Version Definitions:
•Catalog - TI's standard catalog product
•Military - QML certified for Military and Defense Applications
l TEXAS INSTRUMENTS REEL DIMENSIONS TAPE DIMENSIONS ’ I+K0 '«PI» Reel Diame|er AD Dimension deSIgned Io accommodate me componem wIdIh E0 Dimension deSIgned Io eecommodaIe me componenI Iengm KO Dlmenslun desIgned to accommodate me componem Ihlckness 7 w OvereII wmm OHhe earner cape i p1 Pitch between successwe cavIIy cemers f T Reel Width (W1) QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE O O O D O O D O SprockeIHoles ,,,,,,,,,,, ‘ User Direcllon 0' Feed Pockel Quadrams
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
SN74LS85DR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1
SN74LS85NSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 5-Jan-2022
Pack Materials-Page 1
l TEXAS INSTRUMENTS TAPE AND REEL BOX DIMENSIONS
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
SN74LS85DR SOIC D 16 2500 340.5 336.1 32.0
SN74LS85NSR SO NS 16 2000 853.0 449.0 35.0
PACKAGE MATERIALS INFORMATION
www.ti.com 5-Jan-2022
Pack Materials-Page 2
l TEXAS INSTRUMENTS T - Tube height| L - Tube length l ,g + w-Tuhe _______________ _ ______________ width $ — B - Alignment groove width
TUBE
*All dimensions are nominal
Device Package Name Package Type Pins SPQ L (mm) W (mm) T (µm) B (mm)
5962-9754701Q2A FK LCCC 20 1 506.98 12.06 2030 NA
JM38510/31101B2A FK LCCC 20 1 506.98 12.06 2030 NA
M38510/31101B2A FK LCCC 20 1 506.98 12.06 2030 NA
SN74LS85D D SOIC 16 40 507 8 3940 4.32
SN74LS85N N PDIP 16 25 506 13.97 11230 4.32
SN74LS85N N PDIP 16 25 506 13.97 11230 4.32
SN74S85D D SOIC 16 40 507 8 3940 4.32
SN74S85N N PDIP 16 25 506 13.97 11230 4.32
SN74S85N N PDIP 16 25 506 13.97 11230 4.32
SNJ54LS85FK FK LCCC 20 1 506.98 12.06 2030 NA
SNJ54S85FK FK LCCC 20 1 506.98 12.06 2030 NA
PACKAGE MATERIALS INFORMATION
www.ti.com 5-Jan-2022
Pack Materials-Page 3
MECHANICAL DATA AME; CHEF“ ELAR‘REE ?< (a="" cm;="" w”)="" ,eamess="" c="" ’7="" flflflflflfl\="" f="" e="" e="" e="" e="" ,="" kwwwg="" qfijrm“="" a="" i:="" i7="" i4="" i:="" i:="" e7="" eiflfiiflfizj="" vvwwttflfl="" 1="" notes="" ah="" ineur="" dimensions="" are="" in="" inches="" (minmeiers).="" this="" cruwg="" i5="" subjeci="" i0="" chcnge="" without="" noiice="" this="" package="" car="" he="" hermeticuiiy="" secied="" mm="" a="" metai="" ic="" i'ciis="" wiihi="" jedec="" n87004="" 50m)="" {mm="" instruments="" w.="" (i.="" cam="">
MECHANICAL DATA D ( *"ifi O G if” )LASHC SMALL 0U ¥N¥ 4040047 S/M 06/1‘ NO'ES, A AH Hnec' dimensmrs c'e m 'mc'ves ['nflhmeter5> B Th5 drawer ‘5 subje», ,0 change mm: Home, A Body \cngth docs rm mac mod Hoar, p'omswons, (xv gmc bms Mom mm warmers, or gm buns sha‘ nm exceed 3005 (015) eam swce @ Body mm does 101 meme 11mm fish. E Rdererce JEDEC MS 012 mam Ac, nter‘ec: flash sfu‘ not exceed 0017 (043) each swde {if TEXAS INSTRUMENTS www.1i.com
LAND PATTERN DATA D (RiPDSOiGiB) PLASTiC SMALL OUTLINE stencil Openings Example Pod Geometry (See Note c) Non Soidermosk Detirled Pad alir 4x1, 27 i 16X0'55ai ‘+l4xi 27 mwannnaia— i6x}v5°--4Er~Eifl{iEr-Hfl-T @E-HnH-a-a— {downgrade r, Example Snider Mask 0 erlin l /l/ i a i 0 07 It (See Note E) All Around ,' 421i233e4/E oa/iz AH linear dimensions are in millimeters This drawing is subject ta anange without notice. Publication che7351 is recommended tar alternate designs. Laser cutting apertures with trapezoidal wail: and also rounding corners will otter better paste release contact tneir board assembly site ror stencil design recommendations, Rerer to ch—7525 tor otner stencil recommendations Customers shouid contact their board lubrication site tor solder musk toierances between and around Signal pods NOTES: Customers should POE”? r" {I} Tums INSTRUMENTS www.li.com
MECHANICAL DATA NS (R-PDSO-G") PLASTIC SMALL—OUTLINE PACKAGE 14-PINS SHOWN HHFHHFH j j t t H H j, A jfi/—\ % lgLLLLLiLLL/fiif A MAX 1060 1060 1290 1530 A MW 990 9,90 1230 14‘70 4040062/0 03/03 VOTES: A. AH Hneur dimenswons are m mHHmetevs a, Tm: druwmg 5 subject to change wmom name. 0 Body dwmenswons do not mamas mom flash 0v pmtmswom not to exceed 0,15 INSTRUMEN'IS www.li.m
MECHANICAL DATA W (R—GDFP—FWB) CERAM‘C DUAL FLATPACK Base and Seafing Piane 0045 (114) “85 (7-24) I 0.020 (0156) 0.245 (6.22) f I: i i i 0.008 0.20 _ 0.080 2.03) 0.004 (0,i0) 0,055 1.40 47 0,305 (7.75) MAX 4» 0.019 0,48 1 ‘6 i 0.0i5 $0.35; I::I I: T I::I I::I I: :1 3 C I: :1 0430 (i092 : I: 0.370 (9.40) :I I: I: :1 [:3 |::l [:3 |::l “-005 (0-13) MW 4 Piaces [:3 I: i 8 9 T 0350 (9.14) 0.360 (9.14) 0.250 (0.35) 0,250 (6.35) 404018073/F 04/14 NOTES: A. Ail iinsar dimensions are in inches (miiiinisieis). inis drawing is subjeci io cnange wiinoui noiice. This package can be henneiicaiiy seaied Min 0 ceramic Ii'd using glass irit. index point is provided on cap (or lerminai identification oniy. rails wiinin MiL STD i035 00mins r0909? i TEXAS INSTRUMENTS www.mmm
J (R76D1P7TM) CERAVVHC DUAL 1N7L1NE PACKAGE )4 LEADS SHOWN PWS u . W 14 e 18 20 0300 0300 0300 0300 E (7.52) (7.52) (7.62) (7.62) w 5 Est ass ass ass fl fl m m m m m E MAX 0.755 540 0.950 1.060 (19.94) (21.34) (24.35) (25.92) I ..15,,, 1 0 500 0,300 0,310 0.300 U U U U U U U C W (7.52) (7.52) (7.57) (7.52) 0.245 0.245 0.220 0.245 0.005 (1.65) 0 MW 0045 (1.14) (6.22) (6.22) (5.50) (6.22) 0000 ( . ) a «0005(0.13)MN m r ~ 0200 (5.05) MAX 7 ; Seatmg Pmne , 0 (3.30) MN 4 0 020 (0. 66) 0014 (0.36) 0715' 0100 (.)254 0.014 (0.36) 0,000 (0.20) 4040083/F 03/03 VOTES: A. AH Hneur d1mens1ons are 1’1 1mm (muhmeters) a, This druwmg '3 subject m change w'thout nnt'ce. 0, 1m package 15 hermehcoHy sewed mm a cemm 11a usmg q1ass mt. D. 11an pom 1’s prowded on cap fo' 1mm) 1den1111ca0an umy on press cemrmc 9055 m sea) 00W. E FaHs thin ML 513 1035 0011417114. 001141416. GDPPTTB 0'10 001017120
MECHANICAL DATA N (R—PDlP-T“) PLASTIC DUAL—IN—LINE PACKAGE 16 P15 SHOWN PWS " A L . [NM 15 a 20 16 9 0 775 U 777 0 SZU '1 USE 3 , 1H HH HH r% r’H r"—1 r’H H1 1 A VAX “9‘69? (191591 (23,37) (25,92) 0 250 (6,50‘ A MN [1145‘ 0142‘ 0.350 new 3 O 240 (6.10), 15 92/ (1832/ (2 .59) (23,58) MSiUO‘ (A AA AA Ari AA AA AA R1 &. VAR1AT1CN M RR AC AD 1 B 0070( (17s) 0015 (111) A 0045 (1,111 g n > , ‘ -) 3.020 (0,51) MW w o 5 (0 35) 0200( 38) MAX f, ), Gnu E Home 1 1‘ 9 fix—1%)” 1 0125’ 1/111 4% 0010 (v.37 ) NOM 31a) U L»- J 0450 (13,92) MAX L 202‘ (0,53) » e c 015 (0,35) / \ a; 00‘s (0,Zb)® / \ 1 1 \\¥,// 11/18 Pm (My > @ 20 Pm vendor upho'v mom/r 17/7037 NO'FS A AH Mnec' mmensmr‘fi: B 1m: drawmq 1s sume m muss (m1111mevem) 0 change mm): nofice /c\ FuHs wumn JEDEC M57001, except 15 an: 20 p171 'r1111mLm body 1mm (01m A) A The 70 p171 and 15m} shmflder Md” 15 a ve'vdnr 0311071, eher NIH Dr 111 wkflh INSI'RUMENTS www.1i.com
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, regulatory or other requirements.
These resources are subject to change without notice. TI grants you permission to use these resources only for development of an
application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license
is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you
will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these
resources.
TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with
such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for
TI products.
TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2022, Texas Instruments Incorporated