TPI (Test Products Int) 的 Temperature Probes 规格书

规格书反馈/错误

Temperature

Probes

Probe Tips

Penetration / Immersion

Type “F”

28 Alligator Immersion

24 Rounded Immersion

20 Pointed penetration

21 Tapered penetration

26 Corkscrew penetration

22 Chisel penetration

Sub-Mini Connector

Lumberg Connector

40 Air (Thermistor)

32 Ribbon

36 Heavy duty spring

44 Hooded

34 Between pack

42 Beaded thermocouple

48 Caged with rack clip

30 Flat disk (Thermistor)

Surface/Contact

Type “C”

Air/Gas

Type “G”

46 Caged

Bipolar

Connectors

Temperature Probe

Three Year Limited Warranty on TPI Products

KrTygeV TrTygeV JrTygeV Lumberg BIVPolar Penelvalinn [ Immersion T e “F" «w— SullanelCnnlanl 1, 2 “cu

2REFER TO THE TPI WEBSITE FOR ADDITIONAL OR OEM PROBE OPTIONS

www.tpi-thevalueleader.com • 503.520.9197

Probe Type

FKM

Sensor Type Connector Type

F: Penetration/immersion

C: Contact/Surface

G: Air/Gas

K: Type K-thermocouple

T: Type T-thermocouple

J: Type J-thermocouples

X: Thermistor (PST)

M- Sub-miniature

L- Lumberg connector

B- Bipole

Sequential Number

Probe Tips

Sub-Mini

Connector

Lumberg

Connector

Bipolar

Connectors

40 Air (Thermistor)

28 Alligator Immersion

32 Ribbon

24 Rounded Immersion

20 Pointed penetration

21 Tapered penetration

Penetration / Immersion

Type “F”

36 Heavy duty spring

44 Hooded

34 Between pack

42 Beaded thermocouple

26 Corkscrew penetration

48 Caged with rack clip

30 Flat disk (Thermistor)

22 Chisel penetration

Air/Gas

Type “G”

Surface/Contact

Type “C”

46 Caged

What is the difference between thermocouple and thermistor probes?

Thermocouple probes utilize the reaction between two dissimilar metals to produce a voltage that changes as

temperature changes. A thermistor is a resistive with a change in temperature. In general, thermocouples

offer a wider temperature range and quicker response time than thermistors. Thermistors are typically more

accurate than thermocouples.

What are the differences between thermocouple types?

Each thermocouple uses different metals and there fore have different characteristics. Here are general

guidelines:

K-Type- Wide temperature range used in many digital thermometers. Identified by a yellow connector.

T-Type- Narrower temperature range than J-type but more accurate than K and J types, used in digital

thermometers. Identified by a blue connector.

J-Type- Narrower temperature reange the K-Type used in analog and digital thermometers. Identified by

a black connector.

Can different thermocouple types be interchanged?

No. Since each thermocouple type uses different metals in it’s construction they have different output

characteristics. Using a J-type thermocouple in a K-type thermometer will cause measurements to be very

inaccurate.

What are the differences between the connector types TPI offers?

Sub-Mini- This is an industry standard connector type allowing TPI probes to be used in any thermocouple

thermometer using this type of connector. Sub-mini connectors are quick and easy to use, simply push in and

out. A wide variety of economical probes are available with sub-mini connectors, enhancing versatility and

affordability of the temperature tester.

Lumberg- This connector uses a screw collar to attach to the thermometer and is the most secure connection

available. Lumberg connectors are designed for the rigors of food processing environments. Advantages

include:

• Strong connection - stainless steel collar holds and protects connection. Probe will not

pull out of instrument with out unscrewing the collar.

• Waterproof stainless steel will not rust and is ideal for wet, humid conditions

• Lumberg connectors are manufactured following ISO9000 quality control guidelines.

Bi-Polar- This connector is used in the TPI thermistor probe line.

Penelralinn/lmlllersin \ Penelralmn/lmmersmn F [Jamaal/Surface C Air/Gas G

www.tpi-thevalueleader.com • 503.520.9197

REFER TO THE TPI WEBSITE FOR ADDITIONAL OR OEM PROBE OPTIONS

K-Type Thermocouple with Sub-Mini Connector Probes

Penetration/Immersion (F) Contact/ Immersion (C)

Use for penetation into solids and immersion

into semi-solids & liquids.

Designed to measure surface temperatures

Probe

Tips

Air/Gas (G)

Measure air or gas temperatures

Air/Gas Probe Applications. (G)

• Measure air temperatures in duct work.

•Measure air temperature coming from diffusers while Trouble-shooting heating

and air conditioning systems.

•Measure flame temperatures to trouble-shoot industrial heating applications.

•Calibrate thermostats using an ambient air probe.

Penetration / Immersion Probe Applications (F)

•Check internal food temperatures to assure quality control.

• Measure deep fat fryers with a high temp immersion probe.

• Measure liquids and semi-solid temperatures in food processing applications.

•Use a reduced tip probe for quicker response times where time is crucial to

the process.

Contact/Surface Probe Applications (C)

•Measure grill temperature to assure correct cooking temperatures.

• Check frozen food to assure proper storage temperatures.

• Measure temperatures between package to ensure proper

quality control.

• Check any surface for correct process control temperatures.

• Measure superheats on condensers.

• Measure griddle temperature.

• Measure mackinery or mold temperature with a surface probe.

• Measure pipe temperatures in any industrial application.

What type of probe should I use?

The type of probe you use depends upon your application. Here are some general guidelines for different types of probes.

Penetration/Immersion (F) General purpose probe used for penetration and immersion; can be used for air, but is much slower than an air probe.

Need to select the tip type that best cuits the application.

Contact/Surface (C) Contact probes are used to measure surface temperatures. Penetration probes, with the exception of the chisel tip, can’t measure

surface temperatures. Need to select the tip type that best suits the application

Air/Gas (G) Air probes measure the air or gas temperatures. They respond significantly faster than penetration or contact probes in air. Need to select

the tip type that best fits the application.

Pointed: Can be used in air with slower response

Chisel: Can be used in air and on surfaces with

slower response

Tapered: Heavy duty, large diameter shaft for

bend resistant

Ribbon: Fast response.

Spring: Heavy duty sensing element for higher

surface temperatures

Beaded: Flexible, can be used in some liquid

immersion applications

Hooded: Rigid, hood provides protection for the

sensing element.

Caged: Rigid, cage provides maximum protec-

tion for the sensing element.

Model #

Description Application Range°F°C Probe

tip Dimensions Insulation

Material

CK11M

Contact surface

probe, water proof

Contact tempera-

tures on flat and

uneven surfaces

-58° to 500°F

-50° to 250°C 32

Stem Length: 4" (102mm)

Diameter: 0.13" (3.2mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

CK12M

Contact surface

probe, right angle,

waterproof

Contact tempera-

tures on flat and

uneven surfaces

-58° to 500°F

-50° to 250°C 32

Stem Length: 4" (102mm) w/90° bend

Diameter: 0.3" (7.5mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

CK13M

Heavy-duty contact

surface probe

Contact tempera-

tures on flat and

uneven high tem-

perature surfaces

-58° to 1202°F

-50° to 650°C 36

Stem Length: 4" (102mm)

Diameter: 0.6" (14mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

CK14M

Right angle heavy-

duty contact surface

probe

Contact tempera-

tures on flat and

uneven high tem-

perature surfaces

-58° to 1202°F

-50° to 650°C 36

Stem Length: 6" (152mm) w/90° bend

Diameter: 0.6" (14mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

CK15M

Heavy-duty contact

surface probe for

HK11M handle

Contact tempera-

tures on flat and

uneven high tem-

perature surfaces

-40° to 950°F

-40° to 510°C 36

Stem Length: 8" (203mm)

Diameter: 0.6" (14mm)

Lead Length: N/A

IP Rating: N/A

N/A

Model #

Description Application Range°F°C Probe

tip Dimensions Insulation

Material

CK16M

Heavy-duty contact

surface probe

Contact tempera-

tures on flat and

uneven high tem-

perature surfaces

-40° to 950°F

-40° to 510°C 36

Stem Length: 8" (203mm)

Diameter: 0.6" (14mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

CK17M

Contact surface

probe, 45 degree

angle

Contact tempera-

tures on flat and

uneven surfaces

-40° to 500°F

-50° to 250°C 32

Stem Length: 4" (102mm) w/45° bend

Diameter: 0.3" (7.5mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

CK18M

Contact surface

probe

Contact temper-

atures on flat

surfaces

-58° to 500°F

-50° to 250°C 32

Stem Length: N/A

Nomin: 2.36" (60mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

CK20M

Pipe clamp probe

Clamp probe for

pipe tempera-

tures

-58° to 212°F

-50° to 100°C N/A

Max jaw opening: 0.79"

Nominal jaw opening: 0.25"

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

CK21M

Pipe clamp probe

Clamp probe for

pipe tempera-

tures

-58° to 212°F

-50° to 100°C N/A

Max jaw opening: 1.2"

Nominal jaw opening: 0.75"

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

CK22M

Fast response contact

surface probe, 45 degree

angle swivel head sensor

Contact temper-

atures on flat

and uneven sur-

faces

-58° to 500°F

-50° to 250°C 32

Stem Length: 4.5" (114mm) w/45° bend

Diameter: 0.5" (12.7mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

CK23M

Fast response contact

surface probe, 90 degree

angle swivel head sensor

Contact temper-

atures on flat

and uneven sur-

faces

-58° to 500°F

-50° to 260°C 32

Stem Length: 4.9" (125mm) w/90° bend

Diameter: 0.5" (12.7mm)

Lead Length: 39.4" (1M)

IP Rating:

Polyurethane

FK11M

Chisel tip penetra-

tion probe

General purpose

penetration into

semi-solids and

liquids

-58° to 500°F

-50° to 250°C 20

Stem Length: 4" (102mm)

Diameter: 0.13" (3.2mm)

Lead Length: 39.4" (1M)

IP Rating: 67

Polyurethane

FK12M

Pointed tip tapered

penetration probe

Heavy duty penetra-

tion into semi-solids

and liquids tapered

shaft resist bending

-58° to 500°F

-50° to 250°C 21

Stem Length: 11.8" (300mm)

Diameter: 0.25 / 0.10" (6.4 / 2.5mm)

Lead Length: 39.4" (1M)

IP Rating: 67

Polyurethane

FK13M

Pointed tip penetra-

tion probe for

HK11M handle

General purpose

penetration into

semi-solids and

liquids

-40° to 1562°F

-40° to 850°C 20

Stem Length: 8" (203mm)

Diameter: 0.15" (3.75mm)

Lead Length: N/A

IP Rating: 67

N/A

FK14M

Chisel tip penetra-

tion probe

General purpose

penetration into

semi-solids and

liquids

-40° to 1562°F

-40° to 850°C 20

Stem Length: 8" (203mm)

Diameter: 0.15" (3.75mm)

Lead Length: 39.4" (1M)

IP Rating: 67

Polyurethane

FK15M

Tapered tip low mass

quick response pene-

tration probe

Food temperature

measurements

and other light

duty applications

-58° to 500°F

-50° to 250°C 20

Stem Length: 3.75" (80mm)

Diameter: 0.06 (1.6mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

Teflon

FK21M

Tapered chisel tip

penetration probe

General purpose light

duty penetration

applications requiring

fast response

-58° to 500°F

-50° to 250°C 21

Stem Length: 4.” (101.6mm)

Diameter: 0.13”/.06” (3.2/1.6mm)

Lead Length: 39.4” (1M)

IP Rating: 67

Polyurethane

FK22M

Pointed tip penetra-

tion probe

General purpose light

duty penetration

applications requiring

fast response

-58° to 500°F

-50° to 250°C 21

Stem Length: 4" (101.6mm)

Diameter: 0.09/0.06" (3.2/2.5mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

Teflon

FK23M

Rack clamp probe

General purpose

air / liquid probe

with clip

-40° to 950°F

-40° to 510°C 28

Stem Length: N/A

Diameter: N/A

Lead Length: 177" (4.5M)

IP Rating: 67

Teflon

FK24M

Heavy duty T-handle

long stem penetra-

tion probe

General purpose

penetration into

semi-solids and

liquids

-40° to 500°F

-40° to 250°C 21

Stem Length: 24" (610mm)

Diameter: 0.37"/0.15" (9.5mm/3.76mm)

Lead Length: 39.4" (1M)

IP Rating: 67

Polyurethane

www.tpi-thevalueleader.com • 503.520.9197

4REFER TO THE TPI WEBSITE FOR ADDITIONAL OR OEM PROBE OPTIONS

K-Type Thermocouple with Sub-Mini Connector Probes

www.tpi-thevalueleader.com • 503.520.9197

Model #

Description Application Range°F°C Probe

tip Dimensions Insulation

Material

FK25M

Flat sensor

pack probe

Between pack

temperatures

-40° to 400°F

-40° to 204°C 34

Stem Length: N/A

Diameter: N/A

Lead Length: 39.4" (1.2M)

IP Rating: 67

Polyurethane

FK26M

Petes plug probe

Petes plug

temperatures

-40° to 400°F

-40° to 204°C 24

Stem Length: 3" (76mm)

Diameter: 0.12" (3mm)

Lead Length: 39.4" (1M)

IP Rating: 67

Polyurethane

FK27M

Waterproof long

stem heavy duty

penetration probe

General purpose

penetration into

semi-solids and

liquids

-58° to 500°F

-50° to 250°C 21

Stem Length: 11.8" (300mm)

Diameter: 0.25"/0.10" (6.4mm/2.5mm)

Lead Length: 39.4" (1M)

IP Rating: 67

Polyurethane

FK28M

Heavy duty

penetration probe

Heavy duty penetra-

tion into semi-solids

and liquids tapered

shaft resist bending

-58° to 500°F

-50° to 250°C 22

Stem Length: 6.3" (160mm)

Diameter: 0.13" (3.2mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

FK29M

Long stem pointed

tip penetration probe

General purpose

penetration into

semi-solids and

liquids

-58° to 500°F

-50° to 250°C 22

Stem Length: 6.3" (160mm)

Diameter: 0.13" (3.2mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

FK30M

Long stem heavy

duty T-handle pene-

tration probe

Heavy duty penetra-

tion into semi-solids

and liquids tapered

shaft resist bending

-58° to 500°F

-50° to 250°C 22

Stem Length: 24" (609.60mm)

Diameter: 0.38" (9.5mm)

Lead Length: 39.4” (1M)

IP Rating: 67

Polyurethane

FK31M

T-handle corkscrew

insertion probe

General purpose

penetration into

semi-solids

-58° to 500°F

-50° to 250°C 26

Stem Length: 4.5" (114mm)

Diameter: 0.20" (5mm)

Lead Length: 39.4" (1M)

IP Rating: 67

Polyurethane

FK32M

Long stem heavy

duty T-handle pene-

tration probe

Heavy duty penetra-

tion into semi-solids

and liquids tapered

shaft resist bending

-58° to 500°F

-50° to 250°C 24

Stem Length: 18" (457mm)

Diameter: 0.37"/0.15" (9.5mm/3.76mm)

Lead Length: 39.4" (1M)

IP Rating: 67

Polyurethane

GK11M

General purpose

beaded tip probe

Exposed junction for

fast response in non-

food liquid, air and

surface applications

-40° to 950°F

-40° to 510°C 42

Stem Length: N/A

Diameter: 28 gauge

Lead Length: 48" (1.2M)

IP Rating: N/A

Fiberglass

GK12M

General purpose

beaded tip probe

with rack clip

Exposed junc-

tion for fast

response in air

applications.

-40° to 950°F

-40° to 510°C 42

Stem Length: N/A

Diameter: 20 gauge

Lead Length: 48" (1.2M)

IP Rating: N/A

Fiberglass

GK13M

General purpose

beaded tip probe

Exposed junction

for fast response in

food and non-food

liquid, air and sur-

face applications

-40° to 400°F

-40° to 204°C 42

Stem Length: N/A

Diameter: 24 gauge

Lead Length: 48" (1.2M)

IP Rating: N/A

Teflon

GK14M

Rigid stem hooded

exposed tip probe

Exposed junc-

tion for fast

response in air

applications.

-58° to 910°F

-40° to 510°C 44

Stem Length: 3.74" (95mm)

Diameter: 0.13" (3.75mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

GK16M

General purpose caged

air probe for use with

HK11M handle

Caged exposed

junction for fast

response in air

-40° to 500°F

-40° to 260°C 46

Stem Length: 8" (203mm)

Diameter: 0.26" (6.5mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

N/A

GK17M

General purpose

caged air probe

Caged exposed

junction for fast

response in air

-40° to 500°F

-40° to 260°C 46

Stem Length: 8" (203mm)

Diameter: 0.26" (6.5mm)

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

GK18M

General purpose caged

air probe with rack clip

and armored cable

Caged exposed

junction for fast

response in air

-40° to 586°F

-40° to 308°C 48

Stem Length: N/A

Diameter: N/A

Lead Length: 39.4" (1M)

IP Rating: N/A

Braided

stainless steel

GK19M

General purpose

beaded tip probe

with armored cable

Exposed junction

for fast response in

non-food liquid, air

and surface appli-

cations

-40° to 950°F

-40° to 510°C 42

Stem Length: N/A

Diameter: 28 gauge

Lead Length: 48" (1.2M)

IP Rating: N/A

Braided

stainless steel

REFER TO THE TPI WEBSITE FOR ADDITIONAL OR OEM PROBE OPTIONS

K-Type Thermocouple with Sub-Mini Connector Probes

Must be used with EXT31M extension (included)

fl}- G23 2:; Sun-Mini Conn

J-Type Thermocouple with Sub-Mini Connector Probes

6REFER TO THE TPI WEBSITE FOR ADDITIONAL OR OEM PROBE OPTIONS

www.tpi-thevalueleader.com • 503.520.9197

K-Type Thermocouple with Lumberg Connector Probes

T-Type Thermocouple with Lumberg Connector Probes

K-Type Thermocouple with Sub-Mini Connector Probes

Model #

Description Application Range°F°C Probe

tip Dimensions Insulation

Material

CT11L

Surface probe with

ribbon sensor

Surface

Temperatures

Grills

-58° to 500°F

-50° to 250°C 32

Stem Length: 4”(102mm)

Diameter: 0.13” (3.2mm)

Lead Length: 39.4” (1M)

IP Rating: N/A

PVC

FT11L

Chisel tip penetra-

tion probe

General purpose

penetation into

semi-solids and

liquids

-148° to 500°F

-100° to 250°C 22

Stem Length: 4”(101.6mm)

Diameter: 0.13/.15” (3.2mm/2.2mm)

Lead Length: 39.4” (1M)

IP Rating: 67

Polyurethane

Model #

Description Application Range°F°C Probe

tip Dimensions Insulation

Material

GJ11M

Standard fiberglass

insulation, 4 foot, bead-

ed end (disposable)

Exposed junc-

tion for fast

response

-40° to 950°F

-40° to 500°C

Stem Length: N/A

Diameter: 24 Gauge

Lead Length: 1.2

IP Rating: N/A

Fiberglass

GJ12M

GJ11M with

oven clip

Oven clip to

shield sensor

from direct

radiated heat

-40° to 950°F

-40° to 500°C

Stem Length: N/A

Diameter: 24 Gauge

Lead Length: 1.2

IP Rating: N/A

Fiberglass

Model #

Description Application Range°F°C Probe

tip Dimensions Insulation

Material

FK21L

Contact surface

probe with ribbon

sensor. Water proof

Food

Penetration

-58° to 500°F

-50° to 250°C 21

Stem Length: 4” (101.6mm)

Diameter: 0.13/.06” (3.2/1.6mm)

Lead Length: 39.4” (1M)

IP Rating: 67

Polyurethane

FK22L

Oven food probe

Testing food

temperatures

during cooking

-58° to 500°F

-50° to 250°C 20

Stem Length: 4”(101.6mm)

Diameter: 0.09/.06” (3.2/1.6mm)

Lead Length: 47.2” (1.2M)

IP Rating:

Teflon

FK23L

Immersion /

Penetration probe

no handle or lead

Food

Penetration

-58° to 500°F

-50° to 250°C 21

Stem Length: 3.9”(100mm)

Diameter: 0.15” (3.75mm)

Lead Length: NA

IP Rating: 67

FK25L

Flat sensor pack

probe

Between pack -40° to 400°F

-40° to 204°C 34

Stem Length: NA

Diameter: NA

Lead Length: 47.2” (1.2M)

IP Rating: 67

Teflon

FK26L

Immersion /

Penetration probe

Food

Penetration

-58° to 500°F

-50° to 250°C 20

Stem Length: 4”(101.6mm)

Diameter: .09/.06” (2.4/1.6mm)

Lead Length: 39.4” (1M)

IP Rating: 67

Polyurethane

Model #

Description Application Range°F°C Probe

tip Dimensions Insulation

Material

GK20M

Flue temperature

probe

Exposed junction

with cone stop, fast

response in flue

temperature

applications

-40° to 932°F

-40° to 260°C 42

Stem Length: 4.33" (110mm)

Diameter: 0.24" (6mm)

Lead Length: 16' (4.9M)

IP Rating: N/A

Teflon

EXT 31M

Male to Male

Extension

Use with

FK31M N/A N/A

Stem Length: NA

Diameter: NA

Lead Length: 39.4” (1M)

IP Rating: N/A

Polyurethane

HK11M

Handle for use with

K-type interchange-

able probe tips

Use with

FK13M, CK15M,

and GK16M

N/A N/A

Stem Length: N/A

Diameter: N/A

Lead Length: 39.4" (1M)

IP Rating: N/A

Polyurethane

.— Pulpase _ ‘ Pulpase # -=

REFER TO THE TPI WEBSITE FOR ADDITIONAL OR OEM PROBE OPTIONS

Thermistor Probe with Bipolar Connectors

Model #

Description Application Range°F°C Probe

tip Dimensions Insulation

Material

CX13B

Surface flat disk

probe

Surface -40° to 300°F

-40° to 150°C 30

Stem Length: 3.15”(80mm)

Diameter: 0.3” (7.5mm)

Lead Length: 15.7” (0.4M)

IP Rating: N/A

PVC

FX12B

Liquid immersion

probe

General Purpose -40° to 300°F

-40° to 150°C 24

Stem Length: 3.15”(80mm)

Diameter: 0.13” (3.2mm)

Lead Length: 15.7” (0.4M)

IP Rating: N/A

PVC

FX13B

Liquid immersion

probe

General Purpose -40° to 300°F

-40° to 150°C 24

Stem Length: 8”(203mm)

Diameter: 0.13” (3.2mm)

Lead Length: 15.7” (0.4M)

IP Rating: 67

PVC

GX15B

Shielded air probe Air -40° to 300°F

-40° to 150°C 44

Stem Length: 3.15”(80mm)

Diameter: 0.13” (3.2mm)

Lead Length: 15.7” (0.4M)

IP Rating: N/A

PVC

EX11B

extension lead

Thermistor

probes N/A NA

Stem Length: N/A

Diameter: N/A

Lead Length: 36” (0.9M)

IP Rating: N/A

PVC

Thermistor Probe with Lumberg Connectors

Model #

Description Application Range°F°C Probe

tip Dimensions Insulation

Material

FX11L

Liquid immersion

probe

General

Purpose, Liquid

-40° to 300°F

-40° to 150°C 24

Stem Length: 4”(102mm)

Diameter: 0.13” (3.2mm)

Lead Length: 39.4” (1M)

IP Rating: 67

PVC

T-Type Thermocouple with Lumberg Connector Probes

www.tpi-thevalueleader.com • 503.520.9197

Model #

Description Application Range°F°C Probe

tip Dimensions Insulation

Material

FT12L

Needle probe

Weiner probe

for food

processing

-148° to 500°F

-100° to 250°C 22

Stem Length: 4”(101.6mm)

Diameter: 0.13”(3.2mm)

Lead Length: 39.4” (1.0M)

IP Rating: 67

PVC

FT15L

Needle probe

Weiner probe

for food pro-

cessing

-148° to 500°F

-100° to 250°C 22

Stem Length: 3.15”(80mm)

Diameter: 0.06”(1.6mm)

Lead Length: 39.4” (1.2M)

IP Rating: N/A

Teflon

FT21L

Tapered end for

food penetration

Waterproof

Food

penetration

-148° to 500°F

-100° to 250°C 21

Stem Length: 3.75”(95.3mm)

Diameter: 3.2/1.6mm

Lead Length: 39.4” (1.0M)

IP Rating: 67

PVC

FT22L

Oven food probe

Testing food

temperature

during cooking

-40° to 500°F

-50° to 250°C 22

Stem Length: 3.93”(100mm)

Diameter: 0.13” (3.2mm)

Lead Length: 98.4” (2.5M)

IP Rating: N/A

Teflon

FT23L

Oven food probe

Testing food

temperature

during cooking

-40° to 950°F

-40° to 510°C 28

Stem Length: NA

Diameter: NA

Lead Length: 177.2” (4.5M)

IP Rating: N/A

Teflon

FT24L

Heavy duty T-handle

long stem penetra-

tion probe

General purpose

penetration into

semi-solids and

liquids

-40° to 500°F

-40° to 250°C 21

Stem Length: 24" (610mm)

Diameter: 0.37"/0.15" (9.5mm/3.76mm)

Lead Length: 39.4" (1M)

IP Rating: 67

Polyurethane

GT13L

Beaded probe

with FDA approved

insulation

General

Purpose. Air

-148° to 500°F

-100° to 250°C 42

Stem Length: NA

Diameter: NA

Lead Length: 47.2” (1.2M)

IP Rating: 67

Teflon

GT19L

Oven clamp probe

Special

hangingClip for

ovens. Air.

-40° to 500°F

-40° to 510°C 48

Stem Length: NA

Diameter: NA

Lead Length: 39.4” (1M)

IP Rating: 67

Probe selection 0EM[speoialty temperature probes Cost of ownership lemperaiure prohe

The Value Leader

Test Products International, Inc.

Headquarters:

9615 SW Allen Blvd.

Beaverton, OR 97005 USA

503-520-9197

Fax: 503-520-1225

info@tpi-thevalueleader.com

Test Products International, Ltd.

342 Bronte St. South Unit #9

Milton, Ontario L9T 5B7 Canada

905-693-8558

Fax: 905-693-0888

info@tpicanada.com

Test Products International UK Ltd.

Longley House, East Park

Crawley, West Sussex RH10 6AP

England

Tel: +44 (0)1293 561212

Fax: +44 (0)1293 813465

e-mail: info@tpi-uk.com

•Digital Multimeters

•Digital Clamp-Ons

•Temperature Products

•Combustion Analyzers

•Carbon Monoxide

Analyzers

•Combustible Gas

Detectors

•Digital Manometers

•Indoor Air Quality

•Insulation Resistance

Testers (IRT)

•Handheld Oscilliscopes

•Refrigeration Leak

Detectors

•Coax / BNC Cables and

Adapters

•Oscilliscope Probes /

SMTPClips

•Specialty Testers

The

Value

Leader

™

For additional products, specifications, and info contact TPI at tpi-thevalueleader.com or 800.368.5719

Probe selection

TPI has three basic types of temperature probes: Penetration/Immersion (F),

Contact/Surface (C), and Air/Gas (G).

•Penetration/Immersion (F) probes are used for liquids, semi-solids, and solids.

•Contact/Surface (C) probes are designed for surface temperatures.

•Air/Gas (G) probes are designed to measure air or gas temperatures.

Select your type of application and probe tip first. Then match the connector type of the

probe to your instrument.

OEM/specialty temperature probes

Whatever your OEM temperature probe needs are, let TPI help you. Just let us have the

following information, along with your company and contact information.

1. Application, environment, and operating temperature

2. New or existing product

3. Annual usage and release quantities

4. Connector type or bare wire details

5. Length of lead wire and straight or coiled wire

6. Probe tip type and dimensions

7. Any other special requirements, materials, etc.

Cost of ownership temperature probe

Ask us about a customized cost of ownership temperature probe program.

Three Year Limited Warranty on TPI Products

TPI (Test Products Int) 的 Temperature Probes 规格书

信息

帮助

联系我们

关注我们