Molex 的 104238-0x10 Product Spec 规格书

molexa Lite Tra Connector -1 2 Circuits REVTSION. ECR/ECN INFORMATION. TTTLE. SHEET No. EC No. DATE. DOCUMENT NUMBER. CREATED / REVTSED BY. CHECKED EV. APPROVED BY. PS-104238-001
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MINI LITE TRAP
CONNECTOR -1,2 CIRCUITS
PRODUCT SPECIFICATION
SHEET No.
A1
EC No:
KOR2016-0055
1 of 9
DATE:
2015/07/17
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-104238-001
JS.SHIN
SH.CHU
YSOO.KIM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
Mini Lite Trap Connector -1, 2 Circuits
1. SCOPE (적용범위)
This Product Specification covers the Mini Lite Trap Connector -1, 2 Circuits
(이 Spec’은 Mini Lite Trap Connector -1, 2 Circuits 에 대하여 규정한다)
2. PRODUCT DESCRIPTION (제품구성)
2.1 PRODUCT NAME AND SERIES NUMBER (제품명 & 제품번호)
2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS(치수,재질,도금 및 마킹)
See the appropriate Sales Drawings for information on dimensions, materials,
platings, and markings. (관련도면 참조)
3. APPLICABLE DOCUMENTS AND SPECIFICATIONS
Sales drawing : SD-104238-001, SD-104238-003
Packing specification : PK-104238-001
4. RATINGS (정격)
ITEM (항목)
STANDARD (규격)
Rated Voltage (Max.) 최대허용전압
※According to UL Test Condition :
160V [ AC (rms 실효치)/DC]
Outside Insulation
Dia. 절연피복외경
: Φ1.48 mm Max.
※(According to IEC 60838
Test Condition)
AC50V(DC120V)
Rated Current Ampere
(Max.)
최대허용전류
(According to UL Test &
IEC 60838 Test Condition)
Solid Wire
[refer to 8]
[8항 참조]
AWG#26(0.1mm2)
3.0A Max.
AWG#24(0.2mm2)
3.0A Max.
AWG#22(0.3mm2)
3.0A Max.
Ambient Temp. Range
(Operating and Non-operating)
사용온도 범위
-40°C ∼ + 130°C
Include Terminal Temperature Rise
통전에 의한 온도상승 포함. (By UL Conditions)
-30°C ∼ + 65°C
(By IEC 60838 Conditions)
(The rated operating temperature)
Product Name (제품명칭)
Parts Number (제품번호)
Mini Lite Trap Connector -1Circuit (Embossed Packing)
104238-0110
Mini Lite Trap Connector -2Circuits (Embossed Packing)
104238-0210
molexa 1m x REVISION. ECR/ECN INFORMATION. TITLE. SHEET N0. EC No. DATE. DOCUMENT NUMBER. CREATED / REVISED BY. CHECKED BV. APPROVED BY. PS-104238-001
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MINI LITE TRAP
CONNECTOR -1,2 CIRCUITS
PRODUCT SPECIFICATION
SHEET No.
A1
EC No:
KOR2016-0055
2 of 9
DATE:
2015/07/17
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-104238-001
JS.SHIN
SH.CHU
YSOO.KIM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
5. PERFORMANCE(성능)
5-1. ELECTRICAL REQUIREMENTS(전기적 특성)
ITEM
항 목
TEST CONDITION
시 험 조 건
REQUIREMENT
규 격
1
Contact
Resistance
접촉 저항
Mate Connector & Wire : apply a maximum voltage of
20 mV and a current of 100mA. Wire and PCB
resistance shall be removed from the measured value.
커넥터에 Wire를 결합하여, 20mV이하의 전압,
100mA이하의 전류를 인가한다. 저항 측정 값에서 전선
저항치는 제외한다
10 milliohms
MAXIMUM
2
Insulation
Resistance
절연 저항
Mate connector & Wire : apply a voltage of 500 VDC
between adjacent terminals and between terminals to
ground.
커넥터에 Wire를 결합하여, 인접단자 간 그리고 단자와
그라운드간에 DC500V를 인가한다
1,000 Mega ohms
MINIMUM
3
Dielectric
Withstanding
Voltage
내 전압
Mate Connector & Wire : apply a voltage of 1,320 VAC
for 1 minute between adjacent terminals and between
terminals to ground.
커넥터에 Wire를 결합하여, 인접단자 간 그리고 단자와
그라운드간에 AC1,320V를 1분간 인가한다.
No breakdown
이상 없을 것
4
Temperature
Rise
온도 상 승
Mate connector & Wire : measure the temperature rise at
the rated current. (by UL Test Condition)
커넥터에 Wire를 결합하여, 정격 전류를 인가하여 온도
상승을 측정한다. (UL Test 조건)
+30°C
MAXIMUM
molexa REVISION. ECR/ECN INFORMATION. TITLE. SHEET No. EC No. DATE. DOCUMENT NUMBER. CREATED / REVISED BY. CHECKED BY. APPROVED BY. PS-104238-001
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MINI LITE TRAP
CONNECTOR -1,2 CIRCUITS
PRODUCT SPECIFICATION
SHEET No.
A1
EC No:
KOR2016-0055
3 of 9
DATE:
2015/07/17
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-104238-001
JS.SHIN
SH.CHU
YSOO.KIM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
5-2. MECHANICAL REQUIREMENTS(기계적 특성)
ITEM
항 목
TEST CONDITION
시 험 조 건
REQUIREMENT
규 격
5
Wire Insertion
/Retention
Forces
Wire
삽입력 및 발거력
Insert Wire into the Connector and withdraw the wire
from it at a rate of 25 ± 6 mm per minute. [When wire
insertion condition : refer to 10]
Connector에 Wire를 각각 25 ± 6 mm/분의 속도로
삽/,발거를 실시한다.[ 와이어 삽입 조건 10항 참조]
Initial (초기)
Wire Insertion force
(Wire삽입력)
: 10.0 N MAX.
Wire Retention force
(Wire 인발력)
- AWG#22 : 30N Min.
- AWG#24 : 20N Min.
- AWG#26 : 8N Min.
:
.
6
PCB
Retention Force
PCB 접합력
After soldering the connector on PCB, measured the
force to pull connector till connector solder part break
away from PCB
(Testing speed : 25 ± 6 mm per minute)
PCB에 커넥터를 솔더링 한 후, 25 ± 6 mm /분의 속도로
그림방향으로 힘을 가하여 PCB와 거넥터 솔더링부가
파손 될 때의 힘을 측정한다
For 5’s Direction
-1P :①,② Direction
40 N MINIMUM
③,④,⑤ Direction
15 N MINIMUM
-2P : ①,② Direction
60 N MINIMUM
③,④,⑤ Direction
25 N MINIMUM
molexa REVTSION. ECR/ECN INFORMATION. TTTLE. SHEET No. EC No. DATE. DOCUMENT NUMBER. CREATED / REVTSED BY. CHECKED EV. APPROVED BY. PS-104238-001
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MINI LITE TRAP
CONNECTOR -1,2 CIRCUITS
PRODUCT SPECIFICATION
SHEET No.
A1
EC No:
KOR2016-0055
4 of 9
DATE:
2015/07/17
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-104238-001
JS.SHIN
SH.CHU
YSOO.KIM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
5-2. MECHANICAL REQUIREMENTS(기계적 특성)
ITEM
항 목
TEST CONDITION
시 험 조 건
REQUIREMENT
규 격
7
Vibration
내 진 동 성
Mate connector & Wire and subject to the following
vibration conditions:
Vibration Frequency : 20 -500Hz , 3.10G Peak
Duration : 15 minutes in each X.Y.Z axes
커넥터와 Wire를 결합하여 아래 진동상태를 가한다.
진동수 : 20 -500Hz , 3.10G Peak
진동시간 : X.Y.Z축 각 15분
(EIA 3624-28 Test condition D)
No Damage
이상 없을 것
Contact Resistance
(접촉저항)
30 milliohms
MAXIMUM
Discontinuity(순간단락)
< 1 microsecond
8
Shock
(Mechanical)
내 충 격 성
Mate connector & Wire and shock at 30 G's with ½ sine
wave (11 milliseconds) shocks in the ±X,±Y,±Z axes
(18 shocks total).
커넥터와 Wire를 결합하여 반정현파 30G’s (490㎨)의
충격을 ±X,±Y,±Z축 방향에 3회 가한다.
(총 18회)
(EIA 364-27 ,Test Condition H.)
No Damage
이상 없을 것
Contact Resistance
(접촉저항)
30 milliohms
MAXIMUM
Discontinuity(순간단락)
< 1 microsecon
9
Thermal Aging
내 열 성
Mate connector & Wire : expose to:
648 hours at 105 ± 2°C
커넥터와 Wire를 결합하여 주위온도 105 ± 2°C에서
648시간 방치 후 꺼내어 측정한다.
(EIA 364-17 Method A, Test Condition 4.)
No Damage
이상 없을 것
Contact Resistance
(접촉저항)
30 milliohms
MAXIMUM
10
Cold
Resistance
내 한 성
Mate connector & Wire:
Duration: 500 hours;
Temperature: -40 ± 3°C
주위온도 -40 ± 3°C에서 500시간 방치 후 꺼내어
측정한다.
(EIA 364-59)
No Damage
이상 없을 것
Contact Resistance
(접촉저항)
30 milliohms
MAXIMUM
molexa Temgerature “C Duration Minutes REVTSION. ECR/ECN INFORMATION. TTTLE. SHEET No. EC No. DATE. DOCUMENT NUMBER. CREATED / REVTSED BY. CHECKED EV. APPROVED BY. PS-104238-001
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MINI LITE TRAP
CONNECTOR -1,2 CIRCUITS
PRODUCT SPECIFICATION
SHEET No.
A1
EC No:
KOR2016-0055
5 of 9
DATE:
2015/07/17
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-104238-001
JS.SHIN
SH.CHU
YSOO.KIM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
5-3. ENVIRONMENTAL REQUIREMENTS(환경적 특성)
ITEM
항 목
TEST CONDITION
시 험 조 건
REQUIREMENT
규 격
11
Humidity
(Steady State)
내 습 성
Mate connector & Wire : expose to a temperature
of 60 ± 2°C with a relative humidity of 90-95% for
500 hours.
Note: Remove surface moisture and air dry for 1
hour prior to measurements.
커넥터에 Wire를 결합하여 상대습도 90-95% , 온도
60 ± 2°C 상태에서 500 시간 방치한다.
측정 전 수분을 제거하고 대기 에서 1시간 건조한다
(EIA 364-31)
No Damage
이상 없을 것
Contact Resistance
(접촉저항) :
30 milliohms MAXIMUM
Insulation Resistance
(절연저항) :
100 Mega-ohms MINIMUM
Dielectric Withstanding
Voltage (내전압) :
No breakdown
at 1,320 VAC
12
Temperature
Cycling
(Thermal)
열 충 격
Mate connector & Wire : expose to 25 cycles of:
커넥터에 Wire를 결합하여 아래 상태에서 25 cycles
방치.
Temperature °C Duration (Minutes)
온 도 시 간 (분)
-40 +0/-3 30
+105 +3/-0 30
(EIA 364-32 Test Condition ⅶ)
No Damage
이상 없을 것
Contact Resistance
(접촉저항)
30 milliohms MAXIMUM
13
Salt Spray
염 수 분 무
Mate connector & Wire :
Duration: 96 hours exposure;
Atmosphere: salt spray from a 5% solution;
Temperature: 35 +1/-2°C
주위온도 : 35 +1/-2°C 에서 5% 중량비의 염수를
96시간 분무하고 시험후 상온에서 물로 씻은후
실온에서 건조시킨다.
(EIA 364-26)
No Damage
이상 없을 것
Contact Resistance
(접촉저항)
30 milliohms MAXIMUM
14
Humidity
/temperature
cycling
온.습도 Cycle
Mate connector & Wire on PCB :
25~65°C, 80~100%RH, 24hours a cycle,
repeat 10 cycles
.
PCB 상에 Wire가 결합된 Connector를 25에서 65°C
사이의 온도에서 80%에서100% RH를 하루씩
10Cycle을 반복 한다
(EIA 364-31, Method ⅷ)
No Damage
이상 없을 것
Contact Resistance
(접촉저항)
30 milliohms MAXIMUM
molexa REVTSION. ECR/ECN INFORMATION. TTTLE. SHEET No. EC No. DATE. DOCUMENT NUMBER. CREATED / REVTSED BY. CHECKED EV. APPROVED BY. PS-104238-001
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MINI LITE TRAP
CONNECTOR -1,2 CIRCUITS
PRODUCT SPECIFICATION
SHEET No.
A1
EC No:
KOR2016-0055
6 of 9
DATE:
2015/07/17
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-104238-001
JS.SHIN
SH.CHU
YSOO.KIM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
5-3. ENVIRONMENTAL REQUIREMENTS(환경적 특성)
ITEM
항 목
TEST CONDITION
시 험 조 건
REQUIREMENT
규 격
15
Solderability
납 땜 성
SOLDER(Sn3Ag0.5Cu)
Solder Duration : 5 ± 0.5 seconds
Solder Temperature : 260 ± 5°C
SOLDER(Sn3Ah0.5Cu)
납땜시간 : 5 ± 0.5 seconds
납땜온도: 260 ± 5°C
(EIA 638, JESD22-B102D)
Solder coverage:
95% MINIMUM
95% MINIMUM 침적
16
Solder
Resistance
납 땜 내 열 성
Reflow Soldering Method (See para.7)
Solder Duration: 3 ± 0.5 seconds;
Solder Temperature: 260 ± 5°C
Reflow Soldering 방식 (제 7항 참조)
납땜시간 : 3 ± 0.5 seconds
납땜온도: 260 ± 5°C
Visual:
No Damage to
insulator material
외관
변형 없을 것
17
Hydrogen
Sulfide Gas
황화 수소 가스
96 hours exposure to 3± 2 ppm hydrogen sulfide gas at
40 ± 2°C, 80 ± 5%
주위온도 40 ± 2°C, 습도80 ±5% 에서
3±1ppm의 황화수소 가스를 96시간 방치한다
(JISC 0092)
No Damage
이상 없을 것
Contact Resistance
(접촉저항)
30 milliohms
MAXIMUM
18
Ammonia Gas
암모니아 가스
7 hours exposure to NH3 gas evaporating from 3%
ammonia 25ml/l suction
3%암모니아 25ml/l증발가스를 7시간 동안 노출시킨다.
No Damage
이상 없을 것
Contact Resistance
(접촉저항)
30 milliohms
MAXIMUM
19
Corrosive
Atmosphere:
Sulfur Dioxide
Gas
(SO2)
아황산 가스
96 hours exposure to 25± 2 ppm SO2 gas
at 40 ± 2°C ,80 ± 5%
주위온도 40 ± 2°C, 습도80 ±5%에서 25± 2ppm의
아황산가스에 96시간 방치한다.
(JISC 0092)
No Damage
이상 없을 것
Contact Resistance
(접촉저항)
30 milliohms
MAXIMUM
molexa 5‘C/s 30:105ec (230C 90:305ec Tem erature Condition Gra h REVISION. ECR/ECN INFORMATION. TITLE. SHEET No. EC No. DATE. DOCUMENT NUMBER. CREATED / REVISED BY. CHECKED av. APPROVED BY. PS-104238-001
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MINI LITE TRAP
CONNECTOR -1,2 CIRCUITS
PRODUCT SPECIFICATION
SHEET No.
A1
EC No:
KOR2016-0055
7 of 9
DATE:
2015/07/17
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-104238-001
JS.SHIN
SH.CHU
YSOO.KIM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
6 . PACKAGING
Parts shall be packaged to protect against damage during handling, transit and storage.
See Packaging drawing PK-104238-001 for more information.
7. REFLOW CONDITION (REFLOW 조건)
260℃ MAX(10 sec)
(PEAK TEMP.)
2~3.5℃/s 30±10sec
(230℃ MIN.)
1.5~2.5℃/s
90±30sec
(PRE-HEET 150~180℃)
Temperature Condition Graph(온도조건 그래프)
(Temperature on board pattern side)
Reflow possibility : 1 times
(Reflow 횟수 : 1회 이하 가능)
Note : Please check the reflow soldering condition by your own devices beforehand.
Because the condition changes by the soldering devices, P.C.Board, and so on.
(본 Reflow조건은 Reflow 장치 및 기판 조건 등에 의해서 다를 수가 있으므로,
사전에 Reflow조건을 확인하여 주십시오)
molexa Slrip Length 5 i 0.5mm Conductor \ lnsul n Acceptable Non-Acceptable “and Wire Salid Wire The insulnlion, conduclol not be damaged In any way. REVISION. ECR/ECN INFORMATION. TITLE. SHEET No. EC No. DATE. DOCUMENT NUMBER. CREATED / REVISED BY. CHECKED BY. APPROVED BY. PS-104238-001
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MINI LITE TRAP
CONNECTOR -1,2 CIRCUITS
PRODUCT SPECIFICATION
SHEET No.
A1
EC No:
KOR2016-0055
8 of 9
DATE:
2015/07/17
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-104238-001
JS.SHIN
SH.CHU
YSOO.KIM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
8. APPLICABLE WIRES [적용 WIRE]
Wire Range
AWG No.
Number of Conductors /
Diameter of a conductors
(Cross-sectional area of
conductors / mm²)
Insulation
Diameter (mm)
1.5mm Max.
Conductor Type
26
1 / 0.40 (0.1mm2)
1.24
Solid
24
1 / 0.51 (0.2mm2)
1.35
22
1 / 0.64(0.3mm2)
1.48
9. WIRE STRIP LENGTH [Wire 탈피 길이]
PS-104238-001 REVISION: ECFI/ECN INFORMATION: TITLE: SHEET N0. EC No: DATE: DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MINI LITE TRAP
CONNECTOR -1,2 CIRCUITS
PRODUCT SPECIFICATION
SHEET No.
A1
EC No:
KOR2016-0055
9 of 9
DATE:
2015/07/17
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-104238-001
JS.SHIN
SH.CHU
YSOO.KIM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
10. WIRE INSERTION [Wire 삽입 ]
11. The Method of Wire Separation from connected connector [커넥터로부터 Wire 분리 방법]
1) Push the Lever slightly with fingers or tools to separate the wire.
[ Lever 를 손가락이나 Tool 로 가볍게 눌러 Wire 를 분리한다.]
2) Pull the wire after push the Lever had better than Pull the wire and push the lever at the same time.
[동시에 Lever 을 누르면서 Wire 를 당기면서 Wire 을 분리 하는 것보다 Lever 을 누른 후 Wire 를 당겨 분리 한다.]
3) The tip for the easy way to separate the wire is that push the wire forward slightly then push the lever.
[Wire 를 쉽게 빼는 방법은 앞으로 Wire 를 살짝 밀고 Push Lever 을 누르면 더 용이 하게 Wire 를 분리]
※ Use the new conductor cutting off the wire if it used more than 3 times [ for the wire wearing]
[3 회이상 사용한 Wire 는 절단 후 새로운 심선을 탈피 하여 사용 할 것 [Wire 마모 현상]