STMicroelectronics 的 TS420 规格书

规格书反馈/错误

I ’l liieaugmented Sensitive gate 4 A SCRs Daiasheei » producﬁon daia October 2017 D00|D5203 Rev 6 1/14 This is information on a product in full production.

October 2017

DocID5203 Rev 6

1/14

This is information on a product in full production.

www.st.com

TS420

Sensitive gate 4 A SCRs

Datasheet - production data

Features

 On-state RMS current: 4 A

 Repetitive peak off-state voltage (VDRM,

VRRM) 600 V

 Triggering gate current, IGT 0.2 mA

Description

Thanks to highly sensitive triggering levels, the

device is suitable for all applications where the

available gate current is limited, such as motor

control for hand tools, kitchen aids, overvoltage

crowbar protection for low power supplies among

others.

Available in through-hole and surface-mount

packages, they provide an optimized

performance in a limited space area.

Table 1: Device summary

Order code

Sensitivity

Package

TS420-600B

0.2 mA

DPAK

TS420-600H

IPAK

TS420-600T

TO-220AB

2/14 Doc|D5203 Rev 5 ‘1]

Characteristics

TS420

2/14

DocID5203 Rev 6

1 Characteristics

Table 2: Absolute ratings (limiting values)

Symbol

Parameter

Value

Unit

IT(RMS)

RMS on-state current (180 ° conduction angle)

TC = 115°C

IT(AV)

Average on-state current (180 ° conduction angle)

TC = 115°C

2.5

ITSM

Non repetitive surge peak on-state

current

tp = 8.3 ms

Tj initial = 25 °C

tp = 10 ms

I2t

I2t value for fusing

tp = 10 ms

Tj = 25 °C

4.5

A2s

dl/dt

Critical rate of rise of on-state

current

IG = 10 mA, dlG / dt = 0.1 A/µs

f = 60 Hz

Tj = 125 °C

A/µs

IGM

Peak gate current

tp = 20 µs

1.2

PG(AV)

Average gate power dissipation

0.2

VRGM

Maximum peak reverse gate voltage

Tstg

Storage junction temperature range

-40 to +150

°C

Maximum operating junction temperature

-40 to +125

°C

Table 3: Device timings

Symbol

Parameter

Test conditions

Value

Unit

tGT

Gate controlled turn on time

ITM = 10 A,

Tj = 25 °C,

VD = VDRM(max.),

IGT = 10 mA,

dIG/dt = 0.2 A/μs,

RG = 1 kΩ

0.5 (typ.)

µs

Circuit controlled turn off time

ITM = 8 A,

Tj = 125 °C,

VD = 67% VDRM(max.),

VR = 10 V,

dIT/dt = 10 A/μs,

dVD/dt = 2 V/μs,

RG = 1 kΩ

60 (typ.)

D00|D5203 Rev 6 3/14

TS420

Characteristics

DocID5203 Rev 6

3/14

Table 4: Electrical characteristics (Tj = 25 °C unless otherwise specified)

Symbol

Test Conditions

Value

Unit

IGT

VD = 12 V, RL = 33 Ω

Max.

200

µA

VGT

Max.

0.8

VGD

VD = VDRM, RL = 33 kΩ, RGK = 220 Ω

Tj = 125 °C

Min.

0.1

IT = 50 mA, RGK = 1 kΩ

Max.

IG = 2 mA, RGK = 1 kΩ

Max.

dV/dt

VD = 67 % VDRM, RGK = 220 Ω

Tj = 125 °C

Min.

V/µs

VTM

ITM = 8 A, tP = 380 µs

Tj = 25 °C

Max.

1.6

VT0

Threshold voltage

Tj = 125 °C

Max.

0.85

Dynamic resistance

Tj = 125 °C

Max.

mΩ

IDRM

VD = VR =VDRM = VRRM; RGK = 220 Ω

Tj = 25 °C

Max.

µA

IRRM

Tj = 125 °C

Table 5: Thermal parameters

Symbol

Parameter

Value

Unit

Rth(j-c)

Junction to case (DC)

3.0

°C/W

Rth(j-a)

Junction to ambient (DC)

S(1) = 0.5 cm²

DPAK

IPAK

100

TO-220AB

Notes:

(1)Copper surface under tab

4/14 ‘T A (A) 50 As 35 1a 25 2a 15 1a WAVKN L an 05 15 20 25 an o M ,. mo 2., m ‘ . mm???“ W DWKYS'EEUH', D v mm» M ”:1 u on H M a: . < "tswilezj‘cc‘j‘m="" pm="" on="" a="" ,5="" w="" ,5="" w="" us="" m="" m="" m="" mr="" w="" .h‘="" w="" :25':]="" 'hirgkj/‘mrgk:="" 1="" m1="" 2v="" ‘5="" ‘5="" a="" .2="" a="" w="" on="" 2="" u="" m="" 1="" 0)="" 0="" 4n="" n="" 20="" m="" so="" so="" m="" 120="" w="" m="" m="" m="" m="" doc|d5203="" rev="" 5="" ‘1]="">

Characteristics

TS420

4/14

DocID5203 Rev 6

1.1 Characteristics (curves)

Figure 1: Maximum average power dissipation

versus average on-state current

Figure 2: Average and DC on-state current versus

case temperature

Figure 3: Average and D.C. on state current versus

ambient temperature (DPAK)

Figure 4: Relative variation of thermal impedance

junction to ambient versus pulse duration (DPAK)

Figure 5: Relative variation of gate trigger current

and holding current versus junction temperature

Figure 6: Relative variation of holding current

versus gate-cathode resistance (typical values)

E] Lav/mp: yum/mp: 22m n] WWW/WWW : m n, 5 4 WW ITSMKN ‘ A 35 TSM< '="" mm;="" an="" w="" )5="" w="" ‘5="" ‘="" “i="" m="" d="" am="" am="" hm="" mun="" \="" a="" ken-“tm?="" m="" w"="" m="" (1)="" m12;="" nu="" ma="" "="" m="" “7="" a.="" d0ch5203="" rev="" 6="" 5/14="">

TS420

Characteristics

DocID5203 Rev 6

5/14

Figure 7: Relative variation of dV/dt immunity

versus gate-cathode resistance (typical values)

Figure 8: Relative variation of dV/dt immunity

versus gate-cathode capacitance (typical values)

Figure 9: Surge peak on-state current versus

number of cycles

Figure 10: Non-repetitive surge peak on-state

current

Figure 11: On-state characteristics (maximum

values)

Figure 12: Thermal resistance junction to ambient

versus copper surface under tab

information ’ This package drawing may slightly differ from the physical package. However, all 6/14 Doch5203 Rev 5 ‘1]

Package information

TS420

6/14

DocID5203 Rev 6

2 Package information

In order to meet environmental requirements, ST offers these devices in different grades of

ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®

specifications, grade definitions and product status are available at: www.st.com.

ECOPACK® is an ST trademark.

 Epoxy meets UL 94,V0

 Lead-free packages

 Recommended torque value: 0.4 to 0.6 N·m

2.1 DPAK package information

Figure 13: DPAK package outline

This package drawing may slightly differ from the physical package. However, all

the specified dimensions are guaranteed.

information 6.7 The device must be positioned within $@.05 A B D00|D5203 Rev 6 7/14

TS420

Package information

DocID5203 Rev 6

7/14

Table 6: DPAK package mechanical data

Ref.

Dimensions

Millimeters

Inches(1)

Min.

Typ.

Max.

Min.

Typ.

Max.

2.18

2.40

0.0858

0.0945

0.90

1.10

0.0354

0.0433

0.03

0.23

0.0012

0.0091

0.64

0.90

0.0252

0.354

4.95

5.46

0.1949

0.2150

0.46

0.61

0.0181

0.0240

0.46

0.60

0.0181

0.0236

5.97

6.22

0.2350

0.2449

5.10

0.2007

6.35

6.73

0.2500

0.2650

4.32

0.1701

2.29

0.0900

4.57

0.1800

9.35

10.40

0.3681

0.4094

1.00

1.78

0.0394

0.0701

1.27

0.0500

0.60

1.02

0.0236

0.0402

0°

+8°

0°

+8°

Notes:

(1)Dimensions in inches are given for reference only

Figure 14: DPAK recommended footprint (dimensions are in mm)

8/14 informatlon 4 . A _ b4 (:2 L2T ‘ Vl , l h '7 D H H A1 L lg ’ This package drawing may slightly differ from the physical package. However, all Doch5203 Rev 6 ‘1]

Package information

TS420

8/14

DocID5203 Rev 6

2.2 IPAK package information

Figure 15: IPAK package outline

This package drawing may slightly differ from the physical package. However, all

the specified dimensions are guaranteed.

information D00|D5203 Rev 6 9/14

TS420

Package information

DocID5203 Rev 6

9/14

Table 7: IPAK package mechanical data

Ref.

Dimensions

Millimeters

Inches(1)

Min.

Typ.

Max.

Min.

Typ.

Max.

2.20

2.40

0.0866

0.0945

0.90

1.10

0.0354

0.0433

0.64

0.90

0.0252

0.0354

0.95

0.0374

5.20

5.43

0.2047

0.2138

0.30

0.0118

0.45

0.60

0.0177

0.0236

0.46

0.60

0.0181

0.0236

6.00

6.20

0.2362

0.2441

6.40

6.65

0.2520

0.2618

2.28

0.0898

4.40

4.60

0.1732

0.1811

16.10

0.6339

9.00

9.60

0.3545

0.3780

0.80

1.20

0.0315

0.0472

0.80

1.25

0.0315

0.0492

10°

Notes:

(1)Inch dimensions are for reference only.

information E A 4—» R ' F esun gaie 4.7., 0.5 mm max prmrusion (1) D L20 W, b1 J1 Resin gate c 0.5 mm max. 4’ protrusion“) (1) Resin ga‘e posilion accepted in each DHhe MD position shown as weil as (he symmetncai appnsiles 10/14 D00|D5203 Rev 6 ‘1’

Package information

TS420

10/14

DocID5203 Rev 6

2.3 TO-220AB package information

Figure 16: TO-220AB package outline

information D00|D5203 Rev 6 11/14

TS420

Package information

DocID5203 Rev 6

11/14

Table 8: TO-220AB package mechanical data

Ref.

Dimensions

Millimeters

Inches(1)

Min.

Max.

Min.

Max.

4.40

4.60

0.1732

0.1811

0.61

0.88

0.0240

0.0346

1.14

1.55

0.0449

0.0610

0.48

0.70

0.0189

0.0276

15.25

15.75

0.6004

0.6201

1.27 typ.

0.0500 typ.

10.00

10.40

0.3937

0.4094

2.40

2.70

0.0945

0.1063

4.95

5.15

0.1949

0.2028

1.23

1.32

0.0484

0.0520

6.20

6.60

0.2441

0.2598

2.40

2.72

0.0945

0.1071

13.00

14.00

0.5118

0.5512

3.50

3.93

0.1378

0.1547

L20

16.40 typ.

0.6457 typ.

L30

28.90 typ.

1.1378 typ.

ØP

3.75

3.85

0.1476

0.1516

2.65

2.95

0.1043

0.1161

Notes:

(1)Inch dimensions are for reference only.

information TS 4 20 - 600 B(-TR) Sensitive SCR series Current 4:4A 20 = 0.2 mA Voltaqe 600 : 600 V Package B ’ DPAK H , IPAK T : TO-ZZDAB Packing mode B‘ank — Tube rTR = Tape and Reel 12/14 D0ch5203 Rev 6 ‘1’

Ordering information

TS420

12/14

DocID5203 Rev 6

3 Ordering information

Figure 17: Ordering information scheme

Table 9: Ordering information

Order code

Marking

Package

Weight

Base qty.

Delivery mode

TS420-600B

TS420600

DPAK

0.3 g

Tube

TS420-600B-TR

TS420600

2500

Tape and reel

TS420-600H

TS420600

IPAK

0.4 g

Tube

TS420-600T

TS420600T

TO-220AB

2.3 g

Tube

history D0ch5203 Rev 6 13/14

TS420

Revision history

DocID5203 Rev 6

13/14

4 Revision history

Table 10: Document revision history

Date

Revision

Changes

Sep-2000

Previous release.

26-Jan-2010

Updated package illustration for TO-220AB on front page and Table

8. Added Table 5.

28-May-2014

Updated DPAK package information and reformatted to current

standard.

10-May-2016

Updated cover page.

Updated Table 4: "Electrical characteristics (Tj = 25 °C unless

otherwise specified)", Figure 10: "Non-repetitive surge peak on-state

current " and Table 9: "Ordering information".

Complete update of Package information section.

10-Oct-2017

Updated DPAK and D²PAK package information.

14/14 DOCID5203 Rev 6

TS420

14/14

DocID5203 Rev 6

IMPORTANT NOTICE – PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and

improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST

products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order

acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the

design of Purchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.

ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

STMicroelectronics 的 TS420 规格书

信息

帮助

联系我们

关注我们